Roll-N-Lock

Roll-N-Lock Cargo Manager CM532 for 2024-2026 Toyota Tacoma 5ft Bed

Name: Roll-N-Lock Cargo Manager CM532 for 2024-2026 Toyota Tacoma 5ft Bed
Brand: Roll-N-Lock
SKU: CM532
Price: 329.0 USD
Availability: InStock

$329.00 USD

Sale Sold out

Shipping calculated at checkout.

Free Shipping

SKU:CM532

In stock

FREE shipping on this item
Ships in 1–2 business days
30-day hassle-free returns
Price match — found it cheaper?
Secure checkout — SSL encrypted

Key Features

Divides the 5-foot bed into two compartments so light cargo stops sliding
Repositions on three-inch increments down the full length of the bed
Driver-side control levers adjust both sides at once
Spring-activated mechanism pins the divider into each side track
Flips up parallel to the bed to clear long loads without removal
Lateral tie-offs add mid-bed strap points
Installs into the existing Roll-N-Lock cover track holes in about 30 minutes
Backed by a 3-year warranty

Roll-N-Lock CM532 is the Cargo Manager bed divider for the 2024-2026 Toyota Tacoma with the 5-foot bed, covering both the 2.4L turbo and the 2.4L hybrid, and it is an add-on that mounts into an existing Roll-N-Lock retractable tonneau cover's track.

A short bed is a bad place to put a single toolbox - everything migrates to the tailgate under braking. Cargo Manager turns the bed into two adjustable compartments instead. Squeeze the control levers on the driver's side and the divider slides; let go and a spring-activated mechanism pins it into the next slot in each side track, on three-inch centres down the whole bed.

When you need the full run of the bed - lumber, a bike, an awning pole - the divider pivots upward parallel to the bed rather than coming out, and its lateral tie-offs give you strap points a bare bed does not have.

Read the compatibility line before you buy: this is an accessory for a Roll-N-Lock cover, not a standalone bed bar. It bolts into the track holes that cover system already put in your bed, so it does not use the Tacoma's factory deck rails and will not mount under another brand's tonneau.

Key Benefits

Splits the 5-foot bed into two compartments so light cargo stops sliding under braking and cornering
Repositions on three-inch increments along the full length of the bed
Spring-activated mechanism pins the divider into each side track automatically
Pivots up parallel to the bed to clear long loads without removing it
Lateral tie-offs give you strap points mid-bed
Roughly a thirty-minute install using the existing Roll-N-Lock track holes

What's Included

(1) Cargo Manager bed divider
Mounting hardware
(1) instruction manual

Specifications

Bed length: 5-foot bed only
Adjustment: three-inch increments along the bed
Operation: driver-side control levers, spring-activated track pins, flip-up for long loads
Mounting: installs into the existing Roll-N-Lock cover track holes; a Roll-N-Lock tonneau cover is required
Installation: approximately 30 minutes
Rated for lightweight cargo
Warranty: 3-year
CARB status: n/a (non-emissions part)
MPN: CM532. Related: CM533 (the other 4th-gen Tacoma Cargo Manager) and CM531 (2016-2022 Tacoma Access/Double Cab, 6-foot bed)

Fitment

Roll-N-Lock CM532 fits the 2024-2026 Toyota Tacoma with the 5-foot bed, and the application covers the 2.4L four-cylinder and the 2.4L hybrid alike, because the divider references the tonneau track rather than anything under the truck.

Does not fit a 6-foot Tacoma bed - CM532 is cut to the 5-foot bed length. Does not fit the 2016-2022 Tacoma, which uses CM531 in the 6-foot bed. It is not compatible with any tonneau cover other than a Roll-N-Lock, and it cannot be installed on a bed with no Roll-N-Lock cover fitted.

2024-2026 Toyota Tacoma, 5-foot bed, 2.4L turbo - with a Roll-N-Lock cover installed
2024-2026 Toyota Tacoma, 5-foot bed, 2.4L hybrid - with a Roll-N-Lock cover installed

FAQ

Do I need a Roll-N-Lock cover to use CM532?

Yes. Cargo Manager is an add-on for an existing Roll-N-Lock tonneau cover and installs into that cover's track system. It will not work on a bare bed or under another brand's cover.

Will CM532 fit a 6-foot Tacoma bed?

No. CM532 is the 5-foot-bed part number. Roll-N-Lock catalogues a separate Cargo Manager, CM533, for the other 4th-gen Tacoma bed - confirm your bed length against the dealer's application before ordering either.

Does it work on the i-FORCE MAX hybrid Tacoma?

Yes. The 5-foot-bed application for CM532 is listed for both the 2.4L four-cylinder and the 2.4L hybrid, since nothing about the hybrid powertrain changes the bed rails.