DV8 Offroad

DV8 Offroad Centric Winch Front Bumper FBTT1-08 24-26 Toyota Tacoma

Name: DV8 Offroad Centric Winch Front Bumper FBTT1-08 24-26 Toyota Tacoma
Brand: DV8 Offroad
SKU: FBTT1-08
Price: 799.99 USD
Availability: InStock

$799.99 USD

Sale Sold out

Shipping calculated at checkout.

SKU:FBTT1-08

In stock

Calculated shipping — oversized item
Ships in 1–2 business days
30-day hassle-free returns
Price match — found it cheaper?
Secure checkout — SSL encrypted

Key Features

Concealed winch cradle keeps the drum inside the bumper line
3mm, 3.5mm and 5mm plate steel with the heavy material at the impact faces
Retains factory camera, parking sensors, fog lights and adaptive cruise control
Two 1-inch D-ring mounts sized for a 7/8-inch pin
Mounts one 20-inch single-row light bar plus two 3-inch pods
Welded-in zip-tie tabs for winch and light wiring
Micro-texture black powder coat resists scratches and rust
Estimated 4-hour install with minimal cutting

The DV8 Offroad FBTT1-08 is the Centric Series front bumper for the 2024-2026 Toyota Tacoma, a winch-capable steel bumper built from 3mm, 3.5mm and 5mm plate that DV8 has not confirmed on the TRD Pro or Trailhunter trims.

Centric is DV8's mid-width answer to the two extremes of the bumper market. What it is: a plate-steel face with a concealed winch cradle behind it, so the drum disappears into the bumper instead of sitting proud where it looks bolted on.

The detail that matters most on a 2024+ Tacoma is what DV8 kept. Toyota packs the front of this truck with electronics - forward camera, parking sensors, and the radar behind the grille that runs adaptive cruise control - and a bumper that orphans any of them turns into a dashboard full of warnings. DV8 lists FBTT1-08 as retaining the OEM sensors, the camera, the factory fog lights, and adaptive cruise. Installation is an estimated four hours with minimal cutting.

Key Benefits

Three-thickness plate-steel construction - 3mm, 3.5mm and 5mm - with the heavy material placed where impact loads land.
Concealed winch mount accepts various standard-size heavy-duty winches without exposing the drum.
Two 1-inch-thick D-ring mounts that accept a 7/8-inch pin, so recovery loads pull through the bumper structure rather than a bolt-on tab.
Retains the factory forward camera, parking sensors, fog lights and adaptive cruise control - no warning lights, no disabled ACC.
Light provisions for one 20-inch single-row light bar plus two 3-inch pod lights, so a full forward-lighting plan fits without a separate mount.

What's Included

One Centric Series front bumper

Specifications

MPN: FBTT1-08
Series: DV8 Offroad Centric
Material: 3mm, 3.5mm and 5mm plate steel
Finish: micro-texture black powder coat
Winch mount: concealed, accepts various standard-size heavy-duty winches
Fairlead: not compatible with roller fairleads; DV8 recommends an iron or steel hawse-style fairlead when running a steel-cable winch
Recovery: two 1-inch-thick D-ring mounts accepting a 7/8-inch pin
Lighting: one 20-inch single-row light bar and two 3-inch pod lights
OEM retention: sensors, camera, fog lights, adaptive cruise control
Factory skid plate: will not fit any factory skid plate
Install: estimated 4.0 hours, minimal cutting required
UPC: 810087814328
CARB status: n/a (non-emissions part)

Fitment

DV8 Offroad lists FBTT1-08 for the 2024-2026 Toyota Tacoma, the 4th generation truck.

Does not fit the TRD Pro or Trailhunter. DV8 states that it has not confirmed fitment on either of those trim levels, and ExtremeTerrain lists the part as excluding Trailhunter and TRD Pro - both trims carry a different front fascia and bumper structure.

Does not fit alongside any factory skid plate. DV8 states this restriction directly, so the OEM skid must come off and a compatible aftermarket skid is the replacement path.

DV8 does not list FBTT1-08 for any other platform, so the 2025+ 4Runner and 2024+ Land Cruiser 250 are not covered despite the shared TNGA-F architecture.