Rugged Radios RACE INTERCOM KIT - RRP6100 RACE SERIES Intercom with He

The Rugged Radios 6100-2P-HK-NO-DSP is a 2-person RRP6100 Race Series intercom kit with helmet kits for both seats, supplied without the optional Digital Speech Processor (DSP) chips. It carries the same race-bred intercom hardware — Side Tone defeat, Driver Isolate, dual volumes and RF-shielded transformer circuitry — developed for extreme off-road race vehicles.

This configuration

This is the helmet-kit configuration without DSP: OFFROAD-wired helmet kits for driver and co-driver are included, and the intercom can be upgraded later with two DSP chips if you want maximum background-noise rejection.

Four configurations of this kit exist: 6100-2P-HK-DSP-INSTALL (helmet kits, DSP installed), 6100-2P-HK-NO-DSP (helmet kits, no DSP), 6100-2P-RACE-DSP-INSTALL (no helmet kits, DSP installed) and 6100-2P-RACE-NO-DSP (no helmet kits, no DSP). The RRP6100 takes two DSP chips, so a NO-DSP intercom can be upgraded later.

Specifications

• RRP6100 Race Series 2-person intercom
• Side Tone on/off switch to cut background noise
• Driver Isolate switch routes radio traffic to the co-driver
• Independent dual volume controls
• Adjustable internal amplifier gain for earbuds, low-ohm or high-ohm speakers
• Transformer-based circuitry in Total Shielded Housing for RF protection
• Internal microphone level controls match virtually any dynamic mic
• Rear AUX port for music, phones, cameras, GPS or satellite phones
• Accepts handheld or mobile two-way radios

Sold as a 2-person race intercom kit with helmet kits for both positions; DSP chips are not included. Radios are sold separately.