Gates

Gates Belts 47C4266 G-Force CVT Belt for Polaris RZR Turbo

SKU: 47c4266
Price
$110
Out of stock

Stock Notification

Get notified when this product is available again

We Accept

American Express
Apple Pay
Diners Club
Discover
Meta Pay
Google Pay
Mastercard
PayPal
Shop Pay
Visa

Frequently Bought Together

The Gates Belts 47C4266 G-Force Belt for Polaris RZR Turbo features incredible strength and durability with carbon-tensile cords bonded to aramid fiber-loaded rubber in order to improve strength and flexibility.

Features:

  • Engineered for drop-in performance, featuring exceptional strength, flexibility and durability
  • Belts have carbon-tensile cords bonded to aramid fiber-loaded rubber with specially formulated adhesion gum for increased side-load resistance to prevent belt distortion and edge-cord pullout
  • Top-cog style belt
  • Belt design provides optimal power transmission for faster acceleration, improved throttle response and consistent shifting performance
  • Minimal stretch under load results in consistent shifting RPM
  • Maintains peak power throughout the shift curve
  • Wear evenly to reduce belt failure due to edge cord pullout
  • Utilize a carbon tensile cord, combining minimal stretch with extraordinary strength
  • High-performance neoprene with a trapezoidal top-notch and rounded-bottom cog design maximizing heat control and flexibility

 

FITS:

RZR 1000 Turbo : 2016

 

 

The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.

Recommended for You