{"product_id":"injen-power-flow-intake-pf2013rb-2024-toyota-tacoma","title":"Injen Power-Flow Cold Air Intake PF2013RB for 2024-25 Toyota Tacoma","description":"\u003cp\u003eInjen PF2013RB is the black Power-Flow air intake system for the 2024-2025 Toyota Tacoma with the L4-2.4L turbo engine, and Injen dealers also list it for the 2025-2026 Toyota 4Runner and the 2024-2025 Toyota Land Cruiser running the same engine.\u003c\/p\u003e\u003cp\u003eThe 2.4L turbo four in the fourth-generation Tacoma makes its power on boost, and boost is unforgiving about inlet restriction and heat soak. Injen's answer here is a two-part one: get the restriction out of the way with a large fully serviceable dry filter and a smooth tube, then keep the underhood heat off it with a dedicated shield. Injen publishes dyno-proven gains of up to 15 horsepower at the wheels and 19 lb-ft of torque with no additional tuning required, so the truck runs the stock calibration and there is nothing to flash.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 15 hp at the wheels and 19 lb-ft of torque, per Injen's published dyno figures, on the factory calibration with no tune required.\u003c\/li\u003e\n\u003cli\u003eInjen SuperNano-Web dry filter media captures contaminants down to one micron while keeping airflow high - no oiling, and no oil to find its way onto a MAF sensor.\u003c\/li\u003e\n\u003cli\u003eThe filter is fully serviceable, so it cleans and goes back in rather than becoming a consumable.\u003c\/li\u003e\n\u003cli\u003eCross-link polyethylene tubing resists heat transfer far better than bare aluminium, which matters on a turbo four that lives under a closed hood in Phoenix summer traffic.\u003c\/li\u003e\n\u003cli\u003eReinforced automotive-grade silicone couplers hold the joints instead of the thin rubber sleeves used on budget kits.\u003c\/li\u003e\n\u003cli\u003eA custom heat shield built for this engine bay keeps the filter out of radiator wash.\u003c\/li\u003e\n\u003cli\u003eA bolt-on velocity stack smooths the air entering the tube.\u003c\/li\u003e\n\u003cli\u003eCovered by Injen's limited lifetime warranty and made in Pomona, California.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower-Flow intake tube in black\u003c\/li\u003e\n\u003cli\u003eInjen SuperNano-Web dry air filter\u003c\/li\u003e\n\u003cli\u003eBolt-on velocity stack\u003c\/li\u003e\n\u003cli\u003eCustom heat shield\u003c\/li\u003e\n\u003cli\u003eReinforced automotive-grade silicone couplers\u003c\/li\u003e\n\u003cli\u003eHardware for a direct-fit installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eInjen lists PF2013RB for the 2024-2025 Toyota Tacoma with the L4-2.4L turbo engine on its own Tacoma application page. Injen dealers extend the same part number to the 2025-2026 Toyota 4Runner and the 2024-2025 Toyota Land Cruiser, both with that engine. Because the application is written against the 2.4L turbo, it does not fit a naturally aspirated or V6 Toyota, and it is not a Tundra or Lexus GX part - Injen lists neither for this number. Injen publishes no cab, bed, transmission, drivetrain or i-FORCE MAX hybrid restriction for PF2013RB. PF2013RB is the black finish; the same intake is sold as PF2013RG in Cement Gray and PF2013FDE in Flat Dark Earth, and Injen's higher-tier Evolution Elite kit for this truck is a different part family entirely (EVO2201). No CARB Executive Order was found for PF2013RB, so this part is not legal for sale or use in California or other states that have adopted California emission standards.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":53462372942121,"sku":"PF2013RB","price":394.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_726feb08-0540-4d8a-9509-7f6383b01650.jpg?v=1788206177","url":"https:\/\/www.dirtmasters.com\/products\/injen-power-flow-intake-pf2013rb-2024-toyota-tacoma","provider":"Dirt Masters","version":"1.0","type":"link"}