{"title":"2007-2018 Jeep Wrangler (JK)","description":"\u003cp\u003eThe JK Wrangler spent over a decade proving itself on trails worldwide, and the aftermarket followed every step of the way. Whether you're building a dedicated crawler, a daily-driven overlander, or something in between, Dirt Masters carries the JK-specific parts and accessories you need to do it right.\u003c\/p\u003e","products":[{"product_id":"rugged-ridge-11540-32-hd-stubby-front-bumper-jeep-wrangler-jk-jl-gladiator-jt","title":"Rugged Ridge HD Stubby Front Bumper for Jeep Wrangler \u0026 Gladiator","description":"\u003cp\u003eSharpen your Jeep's trail readiness with the Rugged Ridge HD Stubby Front Bumper. Built entirely from heavy-duty steel and finished in a durable satin-black powder coat, its compact stubby width clears the tires for dramatically improved approach angles and maneuverability over rough terrain.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompact stubby design improves approach angle and clears larger tires off-road\u003c\/li\u003e\n\u003cli\u003eRecessed winch plate keeps your recovery setup tucked in and protected\u003c\/li\u003e\n\u003cli\u003eDual oversized drilled tow hooks accept 3\/4\" and 7\/8\" D-ring shackles\u003c\/li\u003e\n\u003cli\u003eIntegrated jack\/lifting recesses allow direct-to-frame lifting\u003c\/li\u003e\n\u003cli\u003eDurable satin-black powder-coat finish resists corrosion and trail abuse\u003c\/li\u003e\n\u003cli\u003eNo-drill bolt-on installation using factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHD Stubby front bumper\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Heavy-duty steel\u003c\/li\u003e\n\u003cli\u003eFinish: Satin-black powder coat\u003c\/li\u003e\n\u003cli\u003eStyle: Stubby front bumper\u003c\/li\u003e\n\u003cli\u003eWinch opening: 25 1\/4\" x 7\" (winch-ready)\u003c\/li\u003e\n\u003cli\u003eRecovery: Dual drilled tow hooks (3\/4\" \u0026amp; 7\/8\" D-rings)\u003c\/li\u003e\n\u003cli\u003eInstallation: No-drill bolt-on\u003c\/li\u003e\n\u003cli\u003eOptional X-Striker accessory sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis bumper is a direct bolt-on fit for the following Jeep models, including both 2-door and Unlimited 4-door bodies:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003e2018-2026 Jeep Wrangler JL\u003c\/li\u003e\n\u003cli\u003e2020-2026 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53222961152297,"sku":"11540.32","price":659.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_ec721447-e643-459c-90b7-1d8dd5988a80.jpg?v=1780357385"},{"product_id":"rugged-ridge-roof-rack-basket-11703-04-jeep-wrangler-jl-4dr","title":"Rugged Ridge Roof Rack with Basket for 18-26 Jeep Wrangler JL 4Dr","description":"\u003cp\u003eHaul more gear without sacrificing the open-air Jeep experience. The Rugged Ridge Roof Rack with Basket bolts to your 2018-2026 Jeep Wrangler JL 4-Door hardtop for a rugged, low-profile cargo platform that's ready for the trail or the campsite.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSturdy steel construction handles up to 150 lbs of cargo on the roof\u003c\/li\u003e\n\u003cli\u003eNo-drill installation completes in about an hour for a clean, factory-look fit\u003c\/li\u003e\n\u003cli\u003eSkeleton-style rails and open basket make it easy to secure loads with straps or bungees\u003c\/li\u003e\n\u003cli\u003eFront crossbar is recessed to mount up to four LED cube lights\u003c\/li\u003e\n\u003cli\u003eLow-profile design adds only about 6 inches in height\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory Freedom Panels so you keep open-air capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteel roof rack frame\u003c\/li\u003e\n\u003cli\u003eCargo basket\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eCargo capacity: Up to 150 lbs\u003c\/li\u003e\n\u003cli\u003eAdded height: Approximately 6 inches\u003c\/li\u003e\n\u003cli\u003eLED light provision: Up to four cube lights on the front crossbar\u003c\/li\u003e\n\u003cli\u003eInstallation: No-drill, approximately 1 hour\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2026 Jeep Wrangler Unlimited (JL) 4-Door models equipped with a factory hardtop. Designed to work with factory Freedom Panels. Not intended for soft tops or power-operated tops such as the Sky One-Touch.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2026 Jeep Wrangler JL 4-Door (Unlimited) - Hardtop\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53222961316137,"sku":"11703.04","price":1019.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_06595d69-9c66-4c90-b53e-e8ad687dcdad.jpg?v=1780357398"},{"product_id":"rugged-ridge-sherpa-roof-rack-kit-11703-22-jeep-wrangler-jk-4-door","title":"Rugged Ridge Sherpa Roof Rack Kit for 07-18 Jeep Wrangler JK 4-Door","description":"\u003cp\u003eHaul more gear without sacrificing access to your top. The Rugged Ridge Sherpa Roof Rack Kit is a heavy-duty steel cargo rack engineered specifically for the 2007-2018 Jeep Wrangler Unlimited JK 4-Door, blending serious load capacity with a clever tilt-back design.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarries up to 300 lbs of gear, recovery equipment, and overland essentials\u003c\/li\u003e\n\u003cli\u003eUnique tilt function swings the rack back for full access to your hard or soft top\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on installation requires no body modification beyond two mounting holes\u003c\/li\u003e\n\u003cli\u003eForward mounting bar doubles as an integrated light bar for added trail visibility\u003c\/li\u003e\n\u003cli\u003eAccepts the Rugged Ridge drop-down light bracket to mount up to four lights\u003c\/li\u003e\n\u003cli\u003eDual-stage texture-black powder coat over e-coat resists rust and trail abuse\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSherpa roof rack assembly\u003c\/li\u003e\n\u003cli\u003eTwo 56.5-inch round crossbars\u003c\/li\u003e\n\u003cli\u003eCrossbar adapters\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStatic load rating: 300 lbs\u003c\/li\u003e\n\u003cli\u003eMaterial: powder-coated steel with e-coat rust preventative\u003c\/li\u003e\n\u003cli\u003eFinish: dual-stage texture black\u003c\/li\u003e\n\u003cli\u003eCrossbars: two 56.5-inch round bars\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-on, two mounting holes required\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered exclusively for the 4-door Wrangler Unlimited JK. Does not fit 2-door JK models. Roof-top tents are not recommended due to the rack's load rating.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007-2018 Jeep Wrangler Unlimited (JK) 4-Door\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53222961348905,"sku":"11703.22","price":1079.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_67d5e61f-2ee6-4a1d-a2f4-a3646aa1862e.jpg?v=1780356255"},{"product_id":"borla-11964-atak-axle-back-exhaust-jeep-wrangler-jl-2-0l","title":"Borla ATAK Axle-Back Exhaust 3.5in Tips for 18-26 Jeep Wrangler JL","description":"\u003cp\u003eThe Borla ATAK axle-back exhaust (part 11964) is a bolt-on T-304 stainless axle-back system for the 2018-2026 Jeep Wrangler JL and JLU with the 2.0L turbo engine, delivering Borla's most aggressive ATAK sound and dual polished 3.5-inch tips.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eATAK sound level delivers Borla's most aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003eMandrel-bent T-304 stainless steel maximizes flow and durability\u003c\/li\u003e\n\u003cli\u003eRecovers horsepower and torque lost to the restrictive factory muffler\u003c\/li\u003e\n\u003cli\u003eDual polished 3.5-inch tips give an aggressive rear-bumper look\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant austenitic stainless steel construction\u003c\/li\u003e\n\u003cli\u003eApplication-engineered for the 2.0L turbo JL\/JLU Wrangler\u003c\/li\u003e\n\u003cli\u003eCovered by Borla's million-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2026 Jeep Wrangler JL (2-door) and JLU (4-door) with the 2.0L turbo engine. Direct bolt-on axle-back replacement with no cutting or welding. Engineered for the 2.0L turbo. It does not fit the 3.6L V6 JL, which uses a different Borla part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent T-304 austenitic stainless steel\u003c\/li\u003e\n\u003cli\u003eATAK sound level (Borla's most aggressive)\u003c\/li\u003e\n\u003cli\u003eDual polished 3.5 in tips\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on, no cutting or welding\u003c\/li\u003e\n\u003cli\u003eBorla Million Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":53222961381673,"sku":"11964","price":890.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0ecfdd1d-9398-4157-b333-33c69c0ca4f5.jpg?v=1780356264"},{"product_id":"borla-140459bc-touring-cat-back-exhaust-jeep-wrangler-jk","title":"Borla Touring Cat-Back Exhaust 2.5in for 12-18 Jeep Wrangler JK","description":"\u003cp\u003eThe Borla Touring cat-back exhaust (part 140459BC) is a bolt-on T-304 stainless cat-back for the 2012-2018 Jeep Wrangler JK Unlimited 4-door 3.6L, with black chrome tips and a deeper-than-stock, drone-free Touring tone.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTouring Series tuning gives a deeper-than-stock tone with no highway drone\u003c\/li\u003e\n\u003cli\u003eMandrel-bent T-304 stainless steel maximizes exhaust flow and durability\u003c\/li\u003e\n\u003cli\u003ePatented straight-through muffler cuts backpressure for crisper throttle response\u003c\/li\u003e\n\u003cli\u003eBlack chrome tips deliver an aggressive, finished rear-end look\u003c\/li\u003e\n\u003cli\u003eCNC-precision build ensures an accurate bolt-on fit\u003c\/li\u003e\n\u003cli\u003eClamp-on installation hardware and instructions included\u003c\/li\u003e\n\u003cli\u003eBacked by Borla's Million-Mile Warranty and proudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2012-2018 Jeep Wrangler JK Unlimited (4-door) 3.6L. Clamp-on installation with the included hardware and instructions; a precision CNC bolt-on fit. For the 4-door JK Unlimited 3.6L. The 2-door JK uses a different part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent T-304 austenitic stainless steel\u003c\/li\u003e\n\u003cli\u003eTouring sound level (deeper than stock, drone-free)\u003c\/li\u003e\n\u003cli\u003ePatented straight-through muffler\u003c\/li\u003e\n\u003cli\u003eBlack chrome tips (3.5 in x 3.28 in)\u003c\/li\u003e\n\u003cli\u003eClamp-on install, hardware and instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBorla Million Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":53222961447209,"sku":"140459BC","price":1389.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_d11288e9-3255-4fae-b4e3-9ba8ac7dbd93.jpg?v=1780356295"},{"product_id":"tuffy-276-01-console-safe-keyed-lock-jeep-wrangler-jk-2011-2018","title":"Tuffy Console Safe Keyed Lock for 11-18 Jeep Wrangler JK","description":"\u003cp\u003eLock down your valuables on the trail or at the trailhead with the Tuffy 276-01 Console Safe for the 2011-2018 Jeep Wrangler JK. This welded-steel security insert drops into your factory center console to create a fully enclosed, lockable storage vault without replacing your console lid.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty welded steel construction with a durable textured powder-coat finish resists prying and forced entry\u003c\/li\u003e\n\u003cli\u003ePry-Guard locking system with a 10-tumbler double-bitted security key for serious theft deterrence\u003c\/li\u003e\n\u003cli\u003eDrop-in installation requires no drilling for the standard setup, using existing console mounting points\u003c\/li\u003e\n\u003cli\u003ePin-Lock hinge with a built-in lid stop holds the lid open and resists tampering\u003c\/li\u003e\n\u003cli\u003eRetains full access to your factory USB and 12V power sources through routed port holes\u003c\/li\u003e\n\u003cli\u003eKeeps your OEM console lid and inner box for a clean, factory appearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWelded-steel Console Safe insert\u003c\/li\u003e\n\u003cli\u003e10-tumbler double-bitted security keys\u003c\/li\u003e\n\u003cli\u003eRemovable electronics tray (doubles as coin and pen holder)\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLock type: Keyed Pry-Guard with 10-tumbler double-bitted key\u003c\/li\u003e\n\u003cli\u003eMaterial: Welded steel with textured powder-coat finish\u003c\/li\u003e\n\u003cli\u003eHinge: Pin-Lock with built-in lid stop\u003c\/li\u003e\n\u003cli\u003ePower access: Routed notches for factory USB and 12V power\u003c\/li\u003e\n\u003cli\u003eInstallation: Drop-in, no drilling required (standard setup)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered for the 2011-2018 Jeep Wrangler JK (2-door and 4-door Unlimited). Requires the factory OEM center console; this is an insert, not a full console replacement. The OEM console inner box and lid are retained.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2011-2018 Jeep Wrangler JK\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I keep my factory console?\u003c\/h3\u003e\n\u003cp\u003eYes. The 276-01 is a drop-in insert that retains your OEM console lid and inner box.\u003c\/p\u003e\n\u003ch3\u003eDoes it require drilling?\u003c\/h3\u003e\n\u003cp\u003eNo. The standard setup drops in with no drilling, using existing console mounting points.\u003c\/p\u003e\n\u003ch3\u003eCan I still use my USB and 12V ports?\u003c\/h3\u003e\n\u003cp\u003eYes. Routed notches retain access to the factory USB and 12V power.\u003c\/p\u003e","brand":"Tuffy Products","offers":[{"title":"Default Title","offer_id":53222962200873,"sku":"276-01","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0097be4f-3094-4561-aca8-4aa426ee7328.jpg?v=1780356371"},{"product_id":"weathertech-445731-front-floorliner-black-14-18-jeep-wrangler-jk","title":"WeatherTech FloorLiner Front Black for 14-18 Jeep Wrangler JK","description":"\u003cp\u003eKeep the front floors of your 2014-2018 Jeep Wrangler JK protected from mud, water, snow, and trail debris with the WeatherTech FloorLiner. Digitally laser-measured for your exact vehicle, it delivers complete coverage where spills and grime collect.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDigitalFit design laser-measured for an exact fit to the JK front floor\u003c\/li\u003e\n\u003cli\u003eRaised channels and a reservoir trap water, mud, and debris away from your shoes\u003c\/li\u003e\n\u003cli\u003eHigh-walled edges contain spills and runoff to protect carpet\u003c\/li\u003e\n\u003cli\u003eAdvanced thermoplastic resists cracking and curling in heat and cold\u003c\/li\u003e\n\u003cli\u003eTextured surface helps keep liners in place and adds grip underfoot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDriver and passenger front FloorLiners (1st row, black)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: WeatherTech\u003c\/li\u003e\n\u003cli\u003ePart Number: 445731\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003ePosition: Front (1st row)\u003c\/li\u003e\n\u003cli\u003eMaterial: High-density tri-extruded (TPE) thermoplastic\u003c\/li\u003e\n\u003cli\u003eStyle: DigitalFit \/ laser measured\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2014-2018 Jeep Wrangler JK, including both 2-door and 4-door Unlimited body styles. Front row only.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2014-2018 Jeep Wrangler (JK) - 2-door and 4-door Unlimited\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes this fit both 2-door and 4-door Wranglers?\u003c\/h3\u003e\u003cp\u003eYes. 445731 fits the front row of the 2014-2018 Jeep Wrangler JK in both 2-door and 4-door Unlimited body styles.\u003c\/p\u003e\u003ch3\u003eHow many liners are included?\u003c\/h3\u003e\u003cp\u003eA front pair: driver and passenger in black.\u003c\/p\u003e\u003ch3\u003eDo they require drilling?\u003c\/h3\u003e\u003cp\u003eNo. They drop over the factory carpet and hose clean, with no drilling.\u003c\/p\u003e","brand":"WeatherTech","offers":[{"title":"Default Title","offer_id":53222963839273,"sku":"445731","price":126.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8f958be9-3814-49e6-92a2-37dc9d4cb6a1.jpg?v=1780356514"},{"product_id":"baja-designs-447067-squadron-r-pro-fog-pocket-kit-jeep-jl-jt-sport","title":"Baja Designs Squadron-R Pro Fog Pocket Kit for Jeep JL\/JT Sport","description":"\u003cp\u003eUpgrade the weak factory fog lights on your Jeep Wrangler JL or Gladiator JT with the Baja Designs Squadron-R Pro Fog Pocket Kit. This direct-fit kit drops a pair of Squadron-R Pro LEDs into the stock fog pockets for a combined 9,800 lumens of trail-shredding output while keeping your factory fit and finish.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMassive 9,800-lumen combined output replaces dim factory fog lights for safer night and trail driving\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play wiring adapters connect to the OEM harness and factory fog switch with no cutting, splicing, or soldering\u003c\/li\u003e\n\u003cli\u003eDurable brackets reuse the stock mounting points for a clean, factory-integrated look\u003c\/li\u003e\n\u003cli\u003eSquadron-R Pro housings deliver Baja Designs proven off-road durability and beam clarity\u003c\/li\u003e\n\u003cli\u003eBacked by the Baja Designs Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) Squadron-R Pro LED lights\u003c\/li\u003e\n\u003cli\u003e(2) Sets of Jeep JL\/JT mounting brackets\u003c\/li\u003e\n\u003cli\u003ePlug-and-play OEM wiring connectors\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCombined output: 9,800 lumens (4,900 per light)\u003c\/li\u003e\n\u003cli\u003e4 LEDs per light, 40 watts each\u003c\/li\u003e\n\u003cli\u003eInstall difficulty: Level 2 Intermediate (approx. 1-2 hours)\u003c\/li\u003e\n\u003cli\u003eRetains factory fog switch operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2026 Jeep Wrangler JL (2-door and 4-door) and 2020-2026 Jeep Gladiator JT in Sport or Sport-S trim. Compatible ONLY with the factory plastic front bumper. Not compatible with steel Rubicon bumpers or Sahara models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2026 Jeep Wrangler JL (Sport \/ Sport-S, plastic bumper)\u003c\/li\u003e\n\u003cli\u003e2020-2026 Jeep Gladiator JT (Sport \/ Sport-S, plastic bumper)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":53222963872041,"sku":"447067","price":568.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1c565a1d-79a2-4761-8f4e-ba97749d8c52.jpg?v=1780357402"},{"product_id":"ebc-gd7814-gd-sport-rear-rotors-jeep-wrangler-jl","title":"EBC GD Sport Slotted Rear Rotors for 2018-2026 Jeep Wrangler JL","description":"\u003cp\u003eUpgrade your Jeep Wrangler JL's rear braking with EBC GD Sport Rotors (GD7814). These dimpled-and-slotted performance rotors are engineered to run cooler, resist fade, and clear dirt, mud, and water from the braking surface, making them an ideal match for both daily driving and the trail.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWide-aperture slots and dimples sweep away water, dust, and debris for consistent bite\u003c\/li\u003e\n\u003cli\u003eRun cooler than stock rotors to help resist brake fade under load\u003c\/li\u003e\n\u003cli\u003ePromote even pad wear to extend the life of your pads and rotors\u003c\/li\u003e\n\u003cli\u003eSilver-colored corrosion-resistant coating helps protect against rust\u003c\/li\u003e\n\u003cli\u003eMachined in the U.K. from R90-approved blanks for OE-grade quality\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fit for JL Wranglers with factory 328mm rear rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEBC GD Sport rear brake rotors (GD7814)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: EBC Brakes\u003c\/li\u003e\n\u003cli\u003eSeries: GD Sport (dimpled and slotted)\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eRotor diameter: 328mm\u003c\/li\u003e\n\u003cli\u003eFinish: Silver corrosion-protective coating\u003c\/li\u003e\n\u003cli\u003eApplication: JL Wranglers with 328mm rear rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2026 Jeep Wrangler (JL) models equipped with factory 328mm solid rear rotors. Confirm your rear rotor diameter before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2026 Jeep Wrangler JL (Rear)\u003c\/li\u003e\u003c\/ul\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":53222964658473,"sku":"GD7814","price":354.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_b6592b70-bf13-465d-aabe-e9b3e426edfb.jpg?v=1780356711"},{"product_id":"powerstop-z36-1273-front-truck-tow-brake-pads-jeep-wrangler","title":"PowerStop Z36 Truck \u0026 Tow Front Brake Pads for 07-18 Jeep Wrangler JK","description":"\u003cp\u003eUpgrade your front brakes with the PowerStop Z36 Truck \u0026amp; Tow carbon-fiber ceramic brake pad set (Z36-1273), engineered for drivers who tow, haul, and hit the trail. This severe-duty front pad set delivers stronger, more confident stops than OE pads while keeping your wheels clean and quiet.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 17% more stopping power than OE pads for towing, hauling, and off-road use\u003c\/li\u003e\n\u003cli\u003eCarbon-fiber infused ceramic friction handles severe-duty heat without fade\u003c\/li\u003e\n\u003cli\u003eLow-dust ceramic formula keeps wheels cleaner\u003c\/li\u003e\n\u003cli\u003eThermal-scorched pad surface for fast, reliable break-in\u003c\/li\u003e\n\u003cli\u003eChamfered, slotted, and shimmed for quiet, vibration-free braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne front axle set (4 pads) of Z36 Truck \u0026amp; Tow carbon-fiber ceramic brake pads\u003c\/li\u003e\n\u003cli\u003ePremium stainless-steel abutment hardware\u003c\/li\u003e\n\u003cli\u003eCeramic brake lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z36-1273\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle\u003c\/li\u003e\n\u003cli\u003eFriction: Carbon-fiber ceramic (Z36 Truck \u0026amp; Tow)\u003c\/li\u003e\n\u003cli\u003eBrand: PowerStop\u003c\/li\u003e\n\u003cli\u003eHardware: Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis front pad set is an application-specific fit. Confirm your year and configuration before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler (JK)\u003c\/li\u003e\n\u003cli\u003e2008-2012 Jeep Liberty\u003c\/li\u003e\n\u003cli\u003e2007-2011 Dodge Nitro\u003c\/li\u003e\n\u003cli\u003e2008-2016 Dodge Grand Caravan\u003c\/li\u003e\n\u003cli\u003e2009-2013 Dodge Journey\u003c\/li\u003e\n\u003cli\u003e2008-2016 Chrysler Town \u0026amp; Country\u003c\/li\u003e\n\u003cli\u003e2009-2011 Volkswagen Routan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this a full front-axle set?\u003c\/h3\u003e\u003cp\u003eYes. You receive one front axle set (4 pads) with premium stainless-steel hardware and ceramic lubricant.\u003c\/p\u003e\u003ch3\u003eWhat vehicles does it fit?\u003c\/h3\u003e\u003cp\u003eThe 2007-2018 Jeep Wrangler JK, plus 2008-2012 Jeep Liberty, 2007-2011 Dodge Nitro, 2008-2016 Dodge Grand Caravan, 2009-2013 Dodge Journey, 2008-2016 Chrysler Town \u0026amp; Country, and 2009-2011 Volkswagen Routan.\u003c\/p\u003e\u003ch3\u003eAre these front or rear pads?\u003c\/h3\u003e\u003cp\u003eFront.\u003c\/p\u003e","brand":"PowerStop","offers":[{"title":"Default Title","offer_id":53222966395177,"sku":"Z36-1273","price":79.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e560d32b-8880-47d2-828d-751cc9d54f50.jpg?v=1780356792"},{"product_id":"bushwacker-14015-trail-armor-cowl-cover-black-jeep-wrangler-jk-2007-2018","title":"Bushwacker Trail Armor Cowl Cover Black for 07-18 Jeep Wrangler JK","description":"\u003cp\u003eStop trail debris and door-ding scuffs from chewing up your Wrangler's cowl. The Bushwacker Trail Armor Cowl Cover wraps the vulnerable cowl corners of your 2007-2018 Jeep Wrangler JK in tough, textured black armor that looks factory and shrugs off the abuse of the trail.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShields the cowl body corners from rocks, brush, and flying trail debris\u003c\/li\u003e\n\u003cli\u003eGuards against paint chips and dings when doors swing open too far\u003c\/li\u003e\n\u003cli\u003eMolded Dura-Flex 2000 TPO resists impacts, UV, and harsh weather\u003c\/li\u003e\n\u003cli\u003eNo-drill installation preserves your Jeep's sheet metal\u003c\/li\u003e\n\u003cli\u003eTextured matte black finish blends with factory and aftermarket trim\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDriver and passenger side cowl covers (sold as a pair)\u003c\/li\u003e\n\u003cli\u003ePre-applied automotive-grade 3M double-sided tape\u003c\/li\u003e\n\u003cli\u003eInstallation hardware and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bushwacker\u003c\/li\u003e\n\u003cli\u003ePart Number: 14015\u003c\/li\u003e\n\u003cli\u003eMaterial: Dura-Flex 2000 TPO\u003c\/li\u003e\n\u003cli\u003eFinish: Textured Black\u003c\/li\u003e\n\u003cli\u003eQuantity: Pair (2 pieces)\u003c\/li\u003e\n\u003cli\u003eInstallation: No-drill, 3M double-sided tape\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for the Jeep Wrangler JK platform, both 2-door and 4-door (Unlimited) models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007-2018 Jeep Wrangler (JK, 2-door and 4-door Unlimited)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes the cowl cover fit both 2-door and 4-door JK Wranglers?\u003c\/h3\u003e\u003cp\u003eYes. It fits the 2007-2018 Jeep Wrangler JK in both 2-door and 4-door (Unlimited) configurations.\u003c\/p\u003e\u003ch3\u003eDoes it require drilling?\u003c\/h3\u003e\u003cp\u003eNo. It installs with pre-applied 3M double-sided tape for a no-drill fit.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":53224807366953,"sku":"14015","price":70.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_2c128389-6ac0-4759-9b88-a4f9a2444b28.jpg?v=1780456369"},{"product_id":"rugged-ridge-sherpa-round-565in-crossbars-07-18-jeep-wrangler-jk-11703-11","title":"Rugged Ridge Sherpa Round 56.5in Crossbars for 07-18 Jeep Wrangler JK","description":"\u003cp\u003eExpand the carrying capacity of your Rugged Ridge Sherpa Roof Rack with this pair of round 56.5-inch crossbars, purpose-built for the 2007-2018 Jeep Wrangler JK and JK Unlimited. The wide spacing and standard round tube profile let you mount the aftermarket accessories you already own and haul more gear on every trail and road trip.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds two full-width crossbars to your Sherpa Roof Rack for extra mounting space\u003c\/li\u003e\n\u003cli\u003eRound 1.125-inch tubing accepts most popular aftermarket bike, kayak, ski, and cargo carriers\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction stands up to off-road abuse and heavy loads\u003c\/li\u003e\n\u003cli\u003eBlack powder-coated finish resists rust, chips, and UV fade\u003c\/li\u003e\n\u003cli\u003eSold as a matched pair for a balanced, finished look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo (2) round 56.5-inch crossbar tubes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCrossbar length: 56.5 inches\u003c\/li\u003e\n\u003cli\u003eTubing diameter: 1.125 inches\u003c\/li\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eQuantity: sold as a pair\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the Rugged Ridge Sherpa Roof Rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the Rugged Ridge Sherpa Roof Rack on the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK (2-door)\u003c\/li\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK Unlimited (4-door)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53224807825705,"sku":"11703.11","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_cd0814d4-a62d-4fb3-8361-0c14ce37c10c.jpg?v=1780456403"},{"product_id":"tuffy-247-01-underseat-drawer-keyed-lock-driver-jeep-wrangler-jk-2007-2018","title":"Tuffy Underseat Drawer Keyed Lock Driver for 07-18 Jeep Wrangler JK","description":"\u003cp\u003eKeep handguns, valuables, and gear secure and out of sight in your Jeep with the Tuffy 247-01 driver-side underseat security drawer. Engineered for the 2007-2018 Jeep Wrangler JK, it slides discreetly beneath the driver's seat to deliver lockable, theft-resistant storage right where you need it.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConceals 324 cubic inches of secure storage discreetly under the driver's seat\u003c\/li\u003e\n\u003cli\u003ePryGuard keyed lock with a 10-tumbler double-bitted key resists prying and break-in attempts\u003c\/li\u003e\n\u003cli\u003eSmooth ball-bearing slides let the drawer glide open and closed even when loaded\u003c\/li\u003e\n\u003cli\u003e16-gauge steel construction with rugged black powder-coat shrugs off corrosion and abuse\u003c\/li\u003e\n\u003cli\u003eMounts using factory hardware with only a single drill hole for a fast, secure install\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA for proven trail-tough durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDriver-side underseat security drawer\u003c\/li\u003e\n\u003cli\u003eKeyed lock with keys\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Tuffy Products\u003c\/li\u003e\n\u003cli\u003ePart Number: 247-01\u003c\/li\u003e\n\u003cli\u003eMaterial: 16-gauge steel, black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eStorage Capacity: 324+ cubic inches\u003c\/li\u003e\n\u003cli\u003eLock: PryGuard 10-tumbler double-bitted keyed lock with weather seals\u003c\/li\u003e\n\u003cli\u003eMounting Position: Driver side, under seat\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2007-2018 Jeep Wrangler JK, driver side. Designed for 2007-2010 JK 2-door and 2007-2018 JK 4-door (Unlimited) models. Does not fit 2011-2018 2-door models or seats equipped with a flip-seat.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007-2018 Jeep Wrangler JK (driver side)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the 247-01 fit a 2-door JK?\u003c\/h3\u003e\n\u003cp\u003eIt fits 2007-2010 JK 2-door and 2007-2018 JK 4-door (Unlimited) driver-side seats; it does not fit 2011-2018 2-door models or flip-seat-equipped seats.\u003c\/p\u003e\n\u003ch3\u003eWhich side is this drawer for?\u003c\/h3\u003e\n\u003cp\u003eThe driver side.\u003c\/p\u003e\n\u003ch3\u003eHow much storage does it add?\u003c\/h3\u003e\n\u003cp\u003eAbout 324 cubic inches of lockable under-seat storage, secured by a PryGuard keyed lock.\u003c\/p\u003e","brand":"Tuffy Products","offers":[{"title":"Default Title","offer_id":53224810119465,"sku":"247-01","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0ab0f259-d20a-4a20-a501-d2682a65b7d9.jpg?v=1780456472"},{"product_id":"borla-140634-s-type-climber-cat-back-exhaust-jeep-wrangler-jk-unlimited-12-18","title":"Borla S-Type Climber Cat-Back Exhaust for 12-18 Jeep Wrangler JK","description":"\u003cp\u003eThe Borla S-Type Climber cat-back exhaust (part 140634) is a bolt-on T-304 stainless high-clearance cat-back for the 2012-2018 Jeep Wrangler Unlimited JK 3.6L, tucking above the frame rails to boost departure angle with an aggressive S-Type tone.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAggressive S-Type sound under hard acceleration with no drone at highway speeds\u003c\/li\u003e\n\u003cli\u003eHigh-clearance design tucks above the frame rails to boost off-road departure angle\u003c\/li\u003e\n\u003cli\u003eLoop-delete Y-pipe routes dual into a single high-clearance exit\u003c\/li\u003e\n\u003cli\u003eBuilt from T-304 austenitic stainless steel to resist trail rust and corrosion\u003c\/li\u003e\n\u003cli\u003eRetains factory catalytic converters to remain EPA and CARB emissions legal\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding needed, backed by Borla's limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2012-2018 Jeep Wrangler Unlimited JK 3.6L (4-door). High-clearance design routes dual into a single high-clearance exit via a loop-delete Y-pipe; retains factory catalytic converters. This is the high-clearance Climber (single high-clearance exit). The standard-clearance Touring version for the JK is sibling part 140459BC.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent T-304 austenitic stainless steel\u003c\/li\u003e\n\u003cli\u003eS-Type sound level (aggressive, no highway drone)\u003c\/li\u003e\n\u003cli\u003eHigh-clearance routing above the frame rails\u003c\/li\u003e\n\u003cli\u003eLoop-delete Y-pipe to a single high-clearance exit\u003c\/li\u003e\n\u003cli\u003eRetains factory catalytic converters (EPA\/CARB legal)\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003cli\u003eBorla Million Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":53224810774825,"sku":"140634","price":1160.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6a2a7046-cf9d-4d95-a858-fd4d34fc4fd0.jpg?v=1780456501"},{"product_id":"rugged-ridge-xor-rear-bumper-tire-carrier-07-18-jeep-wrangler-jk","title":"Rugged Ridge XOR Rear Bumper w\/ Tire Carrier for 07-18 Jeep Wrangler","description":"\u003cp\u003eBuilt for Jeeps that actually see the trail, the Rugged Ridge XOR Rear Bumper with Swing-Out Tire Carrier replaces your factory rear bumper with a stout steel platform engineered for serious off-road duty on the 2007-2018 Jeep Wrangler JK and JKU.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy 3\/16-inch CNC laser-cut steel construction for trail-proven rigidity and impact resistance\u003c\/li\u003e\n\u003cli\u003eSwing-out tire carrier supports a spare up to 40 inches in diameter, freeing up cargo space\u003c\/li\u003e\n\u003cli\u003eCarrier swings clear of the tailgate so you keep full rear-door access\u003c\/li\u003e\n\u003cli\u003eBuilt-in shackle mounts and off-road jack mount for recovery readiness\u003c\/li\u003e\n\u003cli\u003eIntegrated LED bumper recesses for adding rear lighting\u003c\/li\u003e\n\u003cli\u003eWorks with your factory trailer hitch for towing\u003c\/li\u003e\n\u003cli\u003eDurable textured black finish stands up to the elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eXOR rear bumper\u003c\/li\u003e\n\u003cli\u003eSwing-out tire carrier assembly with tailgate plate\u003c\/li\u003e\n\u003cli\u003eSpare tire mounts\u003c\/li\u003e\n\u003cli\u003eLogo backing plate\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware, brackets, and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: Shackles sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16-inch CNC laser-cut plate steel\u003c\/li\u003e\n\u003cli\u003eFinish: Textured (satin) black\u003c\/li\u003e\n\u003cli\u003eSpare tire capacity: up to 40 inches\u003c\/li\u003e\n\u003cli\u003eFeatures: shackle mounts, off-road jack mount, LED bumper recesses\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect bolt-on fitment for the 2007-2018 Jeep Wrangler JK (2-door) and JKU Unlimited (4-door).\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007-2018 Jeep Wrangler (JK \/ JKU)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53224813035817,"sku":"11541.25","price":1139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f8a55995-4dab-46ea-ad99-c452a59eb285.jpg?v=1780456572"},{"product_id":"bushwacker-14009-trail-armor-rear-corners-07-18-jeep-wrangler-jk-2-door","title":"Bushwacker Trail Armor Rear Corners for 07-18 Jeep Wrangler JK 2-Door","description":"\u003cp\u003eHit the trail without sweating rock rash. Bushwacker Trail Armor Rear Corners wrap the vulnerable lower rear quarter panels of your 2007-2018 Jeep Wrangler JK 2-Door in tough, textured armor that takes the abuse so your sheet metal doesn't.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProtects the lower rear corners from rocks, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003eMolded from Dura-Flex 2000 TPO that resists abrasion, fading, and cracking\u003c\/li\u003e\n\u003cli\u003eTextured matte-black finish hides scuffs and blends with factory trim\u003c\/li\u003e\n\u003cli\u003eNo-drill installation preserves your factory body panels\u003c\/li\u003e\n\u003cli\u003eDoubly secured with 3M automotive adhesive plus Bushwacker's screw-clip system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDriver and passenger rear corner guards (2-piece set)\u003c\/li\u003e\n\u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bushwacker\u003c\/li\u003e\n\u003cli\u003ePart Number: 14009\u003c\/li\u003e\n\u003cli\u003eMaterial: Dura-Flex 2000 TPO\u003c\/li\u003e\n\u003cli\u003eFinish: Textured matte black\u003c\/li\u003e\n\u003cli\u003eQuantity: 2-piece set (driver + passenger)\u003c\/li\u003e\n\u003cli\u003eMounting: 3M adhesive + screw-clip, no drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the 2-Door Jeep Wrangler JK. Does not fit 4-Door Unlimited models (see part 14010).\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007-2018 Jeep Wrangler JK 2-Door\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo these fit the 4-door JK Unlimited?\u003c\/h3\u003e\u003cp\u003eNo. The 14009 is for the 2-Door Jeep Wrangler JK; the 4-Door Unlimited uses part 14010.\u003c\/p\u003e\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\u003cp\u003eNo. They mount with 3M automotive adhesive plus Bushwacker's screw-clip system, preserving your factory body panels.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":53224814936361,"sku":"14009","price":141.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6b3a6174-56af-4d71-8d27-2cd583c5e353.jpg?v=1780456600"},{"product_id":"rugged-ridge-savannah-brief-top-black-diamond-wrangler-jl-4-door-13594-35","title":"Rugged Ridge Savannah Brief Top for 2018-2024 Jeep Wrangler JL 4dr","description":"\u003cp\u003eBeat the sun without losing the open-air feel. The Rugged Ridge Savannah Brief Top gives your 2018-2024 Jeep Wrangler JL Unlimited 4-Door a sleek, tailored bikini top that shades both front and rear passengers while keeping the cabin open to the elements.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlack Diamond sailcloth fabric delivers UV protection and a premium, color-matched look\u003c\/li\u003e\n\u003cli\u003eCovers front and rear seating areas for full-length passenger shade\u003c\/li\u003e\n\u003cli\u003eSecures to the factory sport bar and roll cage with built-in straps and buckles for a tight fit\u003c\/li\u003e\n\u003cli\u003eWindshield header channel makes for a clean, trouble-free attachment\u003c\/li\u003e\n\u003cli\u003eBolt-on installation in about an hour with no drilling or vehicle modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Savannah Brief Top in Black Diamond sailcloth\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Black Diamond sailcloth\u003c\/li\u003e\n\u003cli\u003eStyle: Brief \/ bikini top (front and rear coverage)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on, approximately 1 hour\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the 2018-2024 Jeep Wrangler JL Unlimited 4-Door (JLU). Not compatible with 2-Door JL, prior-generation JK models, or the Jeep Gladiator JT.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2024 Jeep Wrangler JL Unlimited (4-Door) - all engine configurations\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227265884457,"sku":"13594.35","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_4a7f7dcb-1fe1-4307-a147-78a7fd756f2c.jpg?v=1780615440"},{"product_id":"rugged-ridge-eclipse-sun-shade-black-mesh-wrangler-jl-4-door-13579-71","title":"Rugged Ridge Eclipse Mesh Sun Shade for 18-25 Jeep Wrangler JL 4dr","description":"\u003cp\u003eBeat the heat without losing the open-air Jeep experience. The Rugged Ridge Full-Length Eclipse Sun Shade stretches from the windshield frame to the rear sports bar of your 2018-2025 Jeep Wrangler JL Unlimited, shading both front and rear passengers from harsh sun and reducing cabin heat.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-length coverage shades both front and rear seats at once\u003c\/li\u003e\n\u003cli\u003eReinforced mesh cuts sun glare and cabin heat while allowing airflow\u003c\/li\u003e\n\u003cli\u003eNo-drill, no-modification install between the windshield frame and rear sports bar\u003c\/li\u003e\n\u003cli\u003eRetains access to factory top clamps so it can stay installed with the top up or down\u003c\/li\u003e\n\u003cli\u003eRolls up and stores in the included mesh storage bag when not in use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne full-length Eclipse mesh sun shade\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting straps\u003c\/li\u003e\n\u003cli\u003eMesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: reinforced mesh\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eCoverage: full-length (front and rear)\u003c\/li\u003e\n\u003cli\u003eInstallation: no-drill, between windshield frame and rear sports bar\u003c\/li\u003e\n\u003cli\u003eBody style: 4-door Unlimited (JLU) only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the 4-door Jeep Wrangler JL Unlimited. Does not fit 2-door JL or prior-generation JK models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2025 Jeep Wrangler JL Unlimited (4-Door)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes this shade cover the rear seats too?\u003c\/h3\u003e\u003cp\u003eYes, it is full-length and shades both front and rear passengers.\u003c\/p\u003e\u003ch3\u003eDoes it fit a 2-door or JK Wrangler?\u003c\/h3\u003e\u003cp\u003eNo, it fits only the 4-door Wrangler JL Unlimited (2018-2025); it does not fit the 2-door JL or prior-generation JK.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between this and 13579.72?\u003c\/h3\u003e\u003cp\u003eThis 13579.71 is the full-length shade covering front and rear; the 13579.72 covers the front section only and also fits the Gladiator JT.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227266146601,"sku":"13579.71","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_eb8b5656-f954-4d41-82b2-ac14f87312ee.jpg?v=1780615446"},{"product_id":"rugged-ridge-hd-full-width-front-winch-bumper-jeep-wrangler-jl","title":"Rugged Ridge HD Full-Width Front Winch Bumper for Jeep Wrangler JL","description":"\u003cp\u003eBuild a trail-ready front end with the Rugged Ridge HD Full-Width Front Bumper, a heavy-duty steel bumper engineered for serious recovery and protection on the Jeep Wrangler JL, Wrangler JK, and Gladiator JT.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-strength 2.55mm steel construction stands up to trail abuse and impacts.\u003c\/li\u003e\n\u003cli\u003eRecessed winch plate accepts most aftermarket winches rated up to 12,000 lbs.\u003c\/li\u003e\n\u003cli\u003eDual oversized tow hooks dual-drilled for 3\/4-inch and 7\/8-inch D-shackles for flexible recovery.\u003c\/li\u003e\n\u003cli\u003eIntegrated lifting points let you safely position a hi-lift jack against the bumper.\u003c\/li\u003e\n\u003cli\u003eDurable satin black powder-coat finish resists corrosion and rock chips.\u003c\/li\u003e\n\u003cli\u003eRetains use of OE fog lights and accepts aftermarket LED lights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHD full-width front bumper with integrated winch plate\u003c\/li\u003e\n\u003cli\u003eDual oversized tow hooks\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: Winch, D-shackles, and lights are sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 2.55mm high-strength steel\u003c\/li\u003e\n\u003cli\u003eFinish: Satin black powder coat\u003c\/li\u003e\n\u003cli\u003ePosition: Front, full-width\u003c\/li\u003e\n\u003cli\u003eWinch capacity: Up to 12,000 lbs\u003c\/li\u003e\n\u003cli\u003eLighting: Accepts OE fog lights and aftermarket LEDs (except Sport OE LED lights)\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits both 2-door and 4-door configurations across the following Jeep models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler JL\u003c\/li\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227267031337,"sku":"11540.31","price":779.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_9f449a40-2f82-492c-9d4e-3cd2623df07c.jpg?v=1780615463"},{"product_id":"rugged-ridge-arcus-stubby-front-winch-bumper-jeep-wrangler-jl-gladiator-jt-11549-04","title":"Rugged Ridge Arcus Stubby Front Bumper for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eBuild a tougher front end with the Rugged Ridge Arcus Front Bumper, a bold stubby-profile bumper engineered for the Jeep Wrangler JL and Gladiator JT. Its mid-width design improves approach angles and tire clearance while delivering serious recovery and winch capability for the trail.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBold stubby profile improves approach angle and clears larger tires\u003c\/li\u003e\n\u003cli\u003eIntegrated steel winch tray accepts winches up to 12,000 lb\u003c\/li\u003e\n\u003cli\u003e1-inch thick recovery hooks handle hard trail recoveries\u003c\/li\u003e\n\u003cli\u003e11-gauge steel construction stands up to impacts and abuse\u003c\/li\u003e\n\u003cli\u003eSatin black powder-coat finish resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003eRetains factory Sport and Sahara fog lights for a clean OE look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArcus front bumper shell (11-gauge steel)\u003c\/li\u003e\n\u003cli\u003e1\/4-inch thick steel winch tray\u003c\/li\u003e\n\u003cli\u003eTwo 1-inch thick recovery hooks (dual-drilled for 3\/4 and 7\/8 D-rings)\u003c\/li\u003e\n\u003cli\u003eIntegrated D-ring mounts\u003c\/li\u003e\n\u003cli\u003eMounting hardware and brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eWidth: Stubby \/ mid-width\u003c\/li\u003e\n\u003cli\u003eMaterial: 11-gauge steel shell with 1\/4-inch winch plate\u003c\/li\u003e\n\u003cli\u003eWinch capacity: Up to 12,000 lb (Hawse or roller fairlead)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin black powder-coat\u003c\/li\u003e\n\u003cli\u003eFog lights: Accepts factory Sport and Sahara fog lights (not Rubicon OEM LED fog lights)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to bolt on to the following Jeep models. Fits both 2-Door and 4-Door body styles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2025 Jeep Wrangler JL (2-Door and 4-Door\/Unlimited)\u003c\/li\u003e\n\u003cli\u003e2020-2025 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227268243753,"sku":"11549.04","price":779.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_410dfc85-cf48-40ed-91e0-e640123757c8.jpg?v=1780615480"},{"product_id":"rugged-ridge-xor-stubby-front-bumper-gladiator-jt-11541-19","title":"Rugged Ridge XOR Stubby Steel Front Bumper for Jeep Gladiator JT","description":"\u003cp\u003eBuilt to take a beating on the trail, the Rugged Ridge XOR Stubby Front Bumper turns your Jeep Gladiator JT into a recovery-ready rig. Its short 'stubby' profile maximizes approach angle while heavy 5mm steel construction stands up to rocks, roots, and hard hits.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStubby profile improves off-road approach angle and tire clearance\u003c\/li\u003e\n\u003cli\u003eIntegrated top-mount winch plate ready for your recovery winch\u003c\/li\u003e\n\u003cli\u003eMassive 1-inch-thick shackle mounts for serious recovery duty\u003c\/li\u003e\n\u003cli\u003e5mm thick steel plate construction for maximum strength\u003c\/li\u003e\n\u003cli\u003eRecessed fog light pockets retain factory OE fog lights\u003c\/li\u003e\n\u003cli\u003eDurable black textured finish resists corrosion and chips\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on install with no drilling or cutting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eXOR Stubby front bumper\u003c\/li\u003e\n\u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n\u003cli\u003eNote: This part (11541.19) does NOT include a skid plate (see 11541.21 for the version with skid plate)\u003c\/li\u003e\n\u003cli\u003eWinch, shackles, and fog lights are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eMaterial: 5mm steel plate\u003c\/li\u003e\n\u003cli\u003eFinish: Black textured powder coat\u003c\/li\u003e\n\u003cli\u003eWinch plate: Integrated top-mount\u003c\/li\u003e\n\u003cli\u003eShackle mounts: 1-inch thick (accepts 3\/4-inch shackles, not included)\u003c\/li\u003e\n\u003cli\u003eSkid plate: Not included with this part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect bolt-on fitment for the Jeep Gladiator JT and Wrangler JK\/JL. Confirm trim fog light compatibility (does not work with Altitude or LED fog lights on some trims).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2020-2025 Jeep Gladiator JT (all configurations)\u003c\/li\u003e\n\u003cli\u003e2018-2025 Jeep Wrangler JL (2-door and 4-door)\u003c\/li\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK (2-door and 4-door)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227268768041,"sku":"11541.19","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8a815e35-b4f7-441b-91ea-d7291834cb12.jpg?v=1780615485"},{"product_id":"artec-industries-jl5611-steel-bumper-winch-plate-v3-wrangler-jl-gladiator-jt","title":"Artec Steel Winch Plate V3 for 18-24 Jeep Wrangler JL \u0026 Gladiator JT","description":"\u003cp\u003eThe Artec Industries V3 Steel Winch Plate (MPN JL5611) lets you mount a winch to the factory steel bumper on the 2018-and-newer Jeep Wrangler JL\/JLU and 2020-and-newer Gladiator JT.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUpgraded 1\/4 in. steel plate, gusseted for extreme rigidity under winch load\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation to the factory steel bumper with no cutting or modification\u003c\/li\u003e\n\u003cli\u003eModeled from Jeep, WARN, and Superwinch CAD files for a precise, no-modification fit with most winches\u003c\/li\u003e\n\u003cli\u003eLets you pre-install the winch on the plate before reinstalling the bumper for an easier build\u003c\/li\u003e\n\u003cli\u003e16-gauge aluminum front cover with stamped Artec A-blade logos for a finished appearance\u003c\/li\u003e\n\u003cli\u003eDurable black powder coat over Made-in-the-USA, in-house steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eV3 steel winch mounting plate\u003c\/li\u003e\n\u003cli\u003e16-gauge aluminum front face cover\u003c\/li\u003e\n\u003cli\u003eHardware for front face plate mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWinch is not included and is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4 in. steel plate with 16-gauge aluminum front cover\u003c\/li\u003e\n\u003cli\u003eFinish: durable black powder coat\u003c\/li\u003e\n\u003cli\u003eConstruction: gusseted, made in the USA in-house\u003c\/li\u003e\n\u003cli\u003eWinch compatibility: most WARN (including Zeon and VR EVO), Smittybilt, and Superwinch models (excluding Superwinch EXP)\u003c\/li\u003e\n\u003cli\u003eNote: older WARN Zeon units (serial #2217394 and below) may require a 90-degree clutch retrofit kit due to lever interference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eMounts to the factory OEM steel bumper. Fits both 2-Door and 4-Door (Unlimited) models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018+ Jeep Wrangler JL \/ JLU\u003c\/li\u003e\n\u003cli\u003e2020+ Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":53227268833577,"sku":"JL5611","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0c95837d-720c-4341-bda0-1a214415bc58.jpg?v=1780615487"},{"product_id":"rugged-ridge-front-bumper-skid-plate-jeep-wrangler-jl-jt-18003-61","title":"Rugged Ridge Front Bumper Skid Plate for 2018-2024 Jeep Wrangler JL","description":"\u003cp\u003ePush deeper into the trail with confidence. The Rugged Ridge Front Bumper Skid Plate adds a rugged 4mm steel shield beneath the front of your Jeep, protecting the factory crash bar and electronic sway bar disconnect from rocks, ruts, and off-road impacts.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShields the factory crash bar and sway bar disconnect from off-road hazards\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 4mm steel plate with fold-and-weld construction for maximum strength\u003c\/li\u003e\n\u003cli\u003eLight textured powdercoat finish resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003eBolt-on installation typically completed in under four hours\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront bumper skid plate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 4mm steel\u003c\/li\u003e\n\u003cli\u003eConstruction: Fold-and-weld\u003c\/li\u003e\n\u003cli\u003eFinish: Light textured powdercoat\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eBumper compatibility: Rugged Ridge Arcus, HD, and Spartacus front bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for the following Jeep applications (excludes Mojave). Requires a compatible Rugged Ridge Arcus, HD, or Spartacus front bumper.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler JL (2-Door and 4-Door Unlimited)\u003c\/li\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227269226793,"sku":"18003.61","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_940c7299-f98c-4bb8-922f-1cf809ab2e20.jpg?v=1780615493"},{"product_id":"rugged-ridge-rocker-guard-body-armor-wrangler-jl-4-door-11651-61","title":"Rugged Ridge Rocker Guard Body Armor for 18-24 Jeep Wrangler JL 4dr","description":"\u003cp\u003eProtect the most vulnerable part of your Jeep's body with the Rugged Ridge Rocker Guard Body Armor, built for the 4-Door Jeep Wrangler JL (Unlimited). These guards cover up the exposed factory pinch welds and shield your rocker panels from rocks, road debris, and trail impacts while adding a clean, aggressive look.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShields rocker panels and underside from rocks and trail debris\u003c\/li\u003e\n\u003cli\u003eCovers unsightly factory pinch welds for a finished, bold appearance\u003c\/li\u003e\n\u003cli\u003eLightweight yet impact-resistant polycarbonate construction\u003c\/li\u003e\n\u003cli\u003eNo-drill installation preserves your Jeep's sheet metal\u003c\/li\u003e\n\u003cli\u003eBolts to existing factory holes plus 3M adhesive for a secure hold\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDriver and passenger side rocker guards (sold as a pair)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInstallation: No-drill, 3M adhesive plus factory-hole bolts\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the 4-Door Jeep Wrangler JL (Unlimited). Not compatible with the 2-Door JL or the Gladiator JT.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2024 Jeep Wrangler JL 4-Door (Unlimited)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227269325097,"sku":"11651.61","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_3d4fe555-49f3-4e83-bf09-5a67e35a393e.jpg?v=1780615496"},{"product_id":"artec-industries-apex-rear-axle-truss-m220-jeep-wrangler-jl","title":"Artec APEX Rear Axle Truss M220 for 2018-2024 Jeep Wrangler JL","description":"\u003cp\u003eThe Artec Industries APEX Rear Axle Truss (MPN JL4502) is a laser-cut 3\/16-inch steel weld-on truss for the 2018-2024 Jeep Wrangler JL with the Dana M220 rear axle.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReinforces the M220 rear axle housing to resist bending and flex under big-tire loads\u003c\/li\u003e\n\u003cli\u003eSupports worry-free wheeling on tires up to 40 inches\u003c\/li\u003e\n\u003cli\u003eLow-profile peaked-top design adds rigidity without sacrificing ground clearance\u003c\/li\u003e\n\u003cli\u003ePeaked shape reduces weight and eliminates long weld seams for less warping\u003c\/li\u003e\n\u003cli\u003eRequires roughly 70% less welding than older truss designs for a faster, cleaner install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) APEX rear axle truss\u003c\/li\u003e\n\u003cli\u003eWelding required; no hardware needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: CNC laser-cut 3\/16-inch mild steel\u003c\/li\u003e\n\u003cli\u003eFinish: Bare steel (weld-on, paint or coat to taste)\u003c\/li\u003e\n\u003cli\u003eAxle: M220 rear axle\u003c\/li\u003e\n\u003cli\u003eTire support: Up to 40-inch tires on stock JL axles\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-on (welding to the cast center section required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the M220 rear axle found on 2018-2024 Jeep Wrangler JL. Fits both 2-door and 4-door (Unlimited) models. Confirm your rig has the M220 rear axle before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2024 Jeep Wrangler JL (2-Door and 4-Door \/ Unlimited) with M220 rear axle\u003c\/li\u003e\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":53227269947689,"sku":"JL4502","price":131.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_92143a2a-f87f-4e2a-8ca8-2249524caab3.jpg?v=1780615507"},{"product_id":"rugged-ridge-front-fender-chop-brackets-drl-jeep-wrangler-jl-gladiator-jt","title":"Rugged Ridge Front Fender Chop Brackets w\/ DRL 18-24 Wrangler JL","description":"\u003cp\u003eTrim out the bulky factory front fender light pods and give your Jeep an aggressive, chopped look with the Rugged Ridge Front Fender Chop Brackets. These steel brackets support the front of your factory fender flare while relocating the side marker and turn signal into a clean, low-profile housing with integrated daytime running lights.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the bulky factory fender light assembly for greater clearance around oversized tires\u003c\/li\u003e\n\u003cli\u003eIntegrated dual-output DRLs glow bright white by day and switch to amber with your turn signals\u003c\/li\u003e\n\u003cli\u003eSturdy steel construction supports the front edge of the factory fender flare\u003c\/li\u003e\n\u003cli\u003eMatte black powder coat blends seamlessly with the factory flare finish\u003c\/li\u003e\n\u003cli\u003eSold as a pair (driver and passenger) for a complete front conversion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 steel chop brackets (driver and passenger)\u003c\/li\u003e\n\u003cli\u003e2 integrated side marker and turn signal DRL housings\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Matte black powder coat\u003c\/li\u003e\n\u003cli\u003eLighting: Dual-output DRL with amber turn signal\u003c\/li\u003e\n\u003cli\u003eSold as: Pair (front, driver and passenger)\u003c\/li\u003e\n\u003cli\u003eInstallation: Requires permanent cutting\/modification of factory fenders; approx. 2-3 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for the front fenders of Rubicon and Mojave trims that use the factory fender-mounted light assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler JL (2-Door and 4-Door Unlimited)\u003c\/li\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227270799657,"sku":"11640.96","price":454.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_4e859bec-8803-40dc-a719-31dd394df925.jpg?v=1780615512"},{"product_id":"rugged-ridge-front-aluminum-inner-fender-liners-jeep-wrangler-jl-gladiator-jt","title":"Rugged Ridge Front Aluminum Inner Fender Liners for 18-25 Jeep","description":"\u003cp\u003eKeep mud, rocks and trail debris out of your engine bay with the Rugged Ridge Front Aluminum Inner Fender Liners. CNC laser-cut from 1\/16-inch aluminum and finished in a durable black powdercoat, this front pair bolts to your factory mounting locations for a clean, drill-free install on your Jeep Wrangler JL or Gladiator JT.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShields the engine compartment from mud, rocks and debris on the trail\u003c\/li\u003e\n\u003cli\u003eProvides additional clearance for larger tires\u003c\/li\u003e\n\u003cli\u003eCNC laser-cut and bent 1\/16-inch aluminum for precise, rigid fitment\u003c\/li\u003e\n\u003cli\u003eBlack powdercoat finish resists corrosion and adds a finished look under the hood\u003c\/li\u003e\n\u003cli\u003eBolts to OEM mounting points using factory hardware with no drilling required\u003c\/li\u003e\n\u003cli\u003eWorks with trimmed OEM fender flares and most aftermarket flares\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne pair of front inner fender liners (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003e5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/16-inch aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: Black powdercoat\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on, factory hardware, no drilling\u003c\/li\u003e\n\u003cli\u003eSold as: Front pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits front position only. Does not fit diesel-equipped models due to windshield washer fluid system clearance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2025 Jeep Wrangler JL (2-Door and 4-Door\/Unlimited)\u003c\/li\u003e\n\u003cli\u003e2020-2025 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227270930729,"sku":"11615.61","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_70fca28b-4c00-47a0-98d1-1f5389e77a77.jpg?v=1780615518"},{"product_id":"rugged-ridge-3in-round-side-steps-wrangler-jl-4-door-11591-12","title":"Rugged Ridge 3-Inch Round Side Steps for 2018-2024 Jeep Wrangler JL","description":"\u003cp\u003eMake climbing into your Wrangler easier and add a rugged finishing touch with the Rugged Ridge 3-Inch Round Side Steps, purpose-built for the 2018-2024 Jeep Wrangler JL 4-Door (JLU).\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a sturdy, easy step into all four doors of your JL Unlimited\u003c\/li\u003e\n\u003cli\u003eNon-slip step pads at each door opening for safe, secure footing in any weather\u003c\/li\u003e\n\u003cli\u003eNo-drill installation using existing factory mounting holes\u003c\/li\u003e\n\u003cli\u003eDurable textured black powder coat resists corrosion and trail abuse\u003c\/li\u003e\n\u003cli\u003eEach step rated to support up to 300 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) 3-Inch Round Side Step Bars (driver and passenger)\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTube diameter: 3 inches\u003c\/li\u003e\n\u003cli\u003eMaterial: 0.07 in. thick steel tube\u003c\/li\u003e\n\u003cli\u003eFinish: Textured black powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 300 lbs per step\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited 5-year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned exclusively for the 4-Door (Unlimited \/ JLU) Jeep Wrangler JL. Does not fit 2-Door Wrangler models or the Gladiator JT.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018-2024 Jeep Wrangler JL 4-Door (Unlimited)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227271127337,"sku":"11591.12","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_a889a048-e863-4d93-8dbe-6241335f4532.jpg?v=1780615522"},{"product_id":"baja-designs-squadron-r-sae-fog-pocket-kit-jeep-wrangler-jl-sahara-amber-447735","title":"Baja Designs Squadron-R SAE Amber Fog Kit for 18-22 Jeep Wrangler JL","description":"\u003cp\u003eUpgrade the factory fog lights on your Sahara-trim Jeep Wrangler JL or Gladiator JT with the Baja Designs Squadron-R SAE Fog Pocket Light Kit. This complete kit drops a pair of amber Squadron-R SAE lights into the OEM fog pockets, retaining factory fit and finish while delivering premium aftermarket LED performance on and off the road.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces dim factory fog lights with high-output Squadron-R SAE LEDs\u003c\/li\u003e\n\u003cli\u003eAmber lens cuts through rain, fog, snow, and dust for better foul-weather visibility\u003c\/li\u003e\n\u003cli\u003eSAE J583-compliant beam with a sharp cutoff keeps you road-legal\u003c\/li\u003e\n\u003cli\u003ePlug-and-play wiring adapters connect to OEM fog connectors - no splicing or soldering\u003c\/li\u003e\n\u003cli\u003eRetains use of the factory fog light switch\u003c\/li\u003e\n\u003cli\u003eVehicle-specific brackets use the stock mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) Squadron-R Amber SAE LED lights\u003c\/li\u003e\n\u003cli\u003e(2) Sets of Jeep JL mounting brackets\u003c\/li\u003e\n\u003cli\u003ePlug-and-play wiring connectors\/adapters\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutput: 2,420 lumens per light\u003c\/li\u003e\n\u003cli\u003eIntensity: up to 15,800 candela\u003c\/li\u003e\n\u003cli\u003ePower draw: 29 watts per light\u003c\/li\u003e\n\u003cli\u003eColor temperature: 5000K daylight\u003c\/li\u003e\n\u003cli\u003eLens color: amber\u003c\/li\u003e\n\u003cli\u003eSAE rating: J583 fog lamp compliant\u003c\/li\u003e\n\u003cli\u003eLED life: ~49,930 hours\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Sahara-trim models with the OEM plastic Sahara bumper only. Both 2-door and 4-door (Unlimited) configurations are covered. Not compatible with Rubicon or steel\/off-road bumpers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2022 Jeep Wrangler JL (Sahara)\u003c\/li\u003e\n\u003cli\u003e2020-2022 Jeep Gladiator JT (Sahara)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":53227272175913,"sku":"447735","price":437.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_c018bb0f-7744-4e62-a086-38a145480332.jpg?v=1780615541"},{"product_id":"artec-industries-bantam-high-clearance-front-bumper-hoop-gladiator-jt-jl-jk","title":"Artec Bantam High Clearance Front Bumper w\/ Hoop for Jeep Gladiator JT","description":"\u003cp\u003eThe Artec Industries Bantam High Clearance Front Bumper with Hoop (MPN JJ8022) is a CNC-laser-cut steel winch-ready front bumper for the 2007-2018 Jeep Wrangler JK, 2018-and-newer Wrangler JL, and 2020-and-newer Gladiator JT.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-clearance design dramatically improves approach angle for steep obstacles\u003c\/li\u003e\n\u003cli\u003eIntegrated hoop guard adds front-end protection and a purposeful look\u003c\/li\u003e\n\u003cli\u003eReinforced winch mount accepts most standard-drum winches comparable to the Warn Zeon\u003c\/li\u003e\n\u003cli\u003eAerospace-grade aluminum bash skid shields the lower bumper on rocks\u003c\/li\u003e\n\u003cli\u003eUSA-made CNC laser-cut and formed steel for unmatched strength\u003c\/li\u003e\n\u003cli\u003eInternal gussets and thick alloy shackle mounts for serious recovery duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-clearance front bumper with integrated hoop guard\u003c\/li\u003e\n\u003cli\u003e3\/16\" aluminum bash skid plate\u003c\/li\u003e\n\u003cli\u003eIntegrated winch mount and fairlead mount\u003c\/li\u003e\n\u003cli\u003eBuilt-in 3\/4\" alloy steel shackle mounts\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWinch and shackles are not included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConstruction: 1\/4\" and 3\/16\" CNC laser-cut and formed steel\u003c\/li\u003e\n\u003cli\u003eBash skid: 3\/16\" aerospace-grade aluminum\u003c\/li\u003e\n\u003cli\u003eHoop: 1.75\" DOM tubing with plate-steel gussets\u003c\/li\u003e\n\u003cli\u003eShackle mounts: 3\/4\" thick alloy steel\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 65 lbs\u003c\/li\u003e\n\u003cli\u003eFinish: bare steel or matte black powder coat\u003c\/li\u003e\n\u003cli\u003eWinch: compatible with most standard winches (not offset-drum winches)\u003c\/li\u003e\n\u003cli\u003eInstallation: requires drilling and trimming ~5.25\" from the front frame horns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis exact part (JJ8022) is a shared front bumper that mounts to the common front frame across the JK, JL and JT platforms. Confirm winch and fairlead choice for your build.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator (JT)\u003c\/li\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler (JL)\u003c\/li\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler (JK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":53227272438057,"sku":"JJ8022","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_3b40835a-7f03-45c7-b3ec-39059bb027e2.png?v=1780615544"},{"product_id":"kc-hilites-a-pillar-light-mount-brackets-jeep-wrangler-jl-7318","title":"KC HiLiTES A-Pillar Light Mount Brackets for 18-24 Jeep Wrangler JL","description":"\u003cp\u003eThe KC HiLiTES 7318 are a pair of A-pillar light mount brackets that add an OEM-style upper auxiliary light location to the Jeep Wrangler JL and Gladiator JT.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a matched pair of brackets with stainless M6 hardware and aluminum spacers. Lights are not included.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to the factory A-pillar\/cowl locations — no drilling required\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel construction survives off-road vibration\u003c\/li\u003e\n\u003cli\u003eBlack powder-coat finish resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003eEach bracket holds one auxiliary light up to 6 inches\u003c\/li\u003e\n\u003cli\u003eIncludes stainless-steel M6 hardware and aluminum spacers; fits 2-door and 4-door\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Jeep Gladiator (2020-2024) and Jeep Wrangler (2018-2024). These are brackets only — auxiliary lights are sold separately. Each bracket holds one light up to 6 inches.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the 7318 require drilling?\u003c\/h3\u003e\u003cp\u003eNo. It bolts to the factory A-pillar\/cowl locations with the included hardware, so no drilling is required.\u003c\/p\u003e\n\u003ch3\u003eWhat lights do these brackets hold?\u003c\/h3\u003e\u003cp\u003eEach bracket mounts one auxiliary light up to 6 inches. Lights are sold separately.\u003c\/p\u003e\n\u003ch3\u003eDo they fit both 2-door and 4-door Jeeps?\u003c\/h3\u003e\u003cp\u003eYes. They fit both 2-door and 4-door Wrangler JL, plus the Gladiator JT.\u003c\/p\u003e","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":53227272634665,"sku":"7318","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8089687d-887c-4d4e-a385-f6abd443c7a6.jpg?v=1780615549"},{"product_id":"rugged-ridge-fortis-front-tube-doors-mirrors-wrangler-jl-gladiator-jt-11509-15","title":"Rugged Ridge Fortis Front Tube Doors w\/ Mirrors for 18-24 Jeep","description":"\u003cp\u003eOpen up your Jeep to the trail with the Rugged Ridge Fortis Front Tube Doors. Crafted from fully welded 2-inch OD steel tubing and finished in durable black powder coat, this front door pair adds classic open-air off-road style while keeping you secured behind a rotary latch.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContinuous-tube perimeter styling for a clean, aggressive trail look\u003c\/li\u003e\n\u003cli\u003eFully welded 2-inch OD steel construction is rattle-free and trail-proven\u003c\/li\u003e\n\u003cli\u003eFactory-style hinge pins drop in with no drilling for fast installation\u003c\/li\u003e\n\u003cli\u003eSecure rotary latching mechanism keeps doors firmly closed\u003c\/li\u003e\n\u003cli\u003eIncludes matching side mirrors so you stay road-legal\u003c\/li\u003e\n\u003cli\u003eBlack powder-coat finish resists corrosion and trail abuse\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront driver and passenger tube doors (one pair)\u003c\/li\u003e\n\u003cli\u003eMatching side mirrors\u003c\/li\u003e\n\u003cli\u003eFactory-style hinge pins and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosition: Front pair\u003c\/li\u003e\n\u003cli\u003eMaterial: 2-inch OD steel tubing, fully welded\u003c\/li\u003e\n\u003cli\u003eFinish: Black powder coat\u003c\/li\u003e\n\u003cli\u003eMirrors: Included\u003c\/li\u003e\n\u003cli\u003eLatch: Rotary latching mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect fit for the front door openings on the following Jeep models. This is a front pair only; rear doors are sold separately. Front doors are shared between 2-door and 4-door Wrangler bodies.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler JL (2-door and 4-door\/Unlimited)\u003c\/li\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227274207529,"sku":"11509.15","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_280dde0e-3adb-495d-801f-f40f4676c372.jpg?v=1780615566"},{"product_id":"rugged-ridge-hitch-receiver-skid-plate-jeep-wrangler-gladiator-jt-18013-01","title":"Rugged Ridge Hitch Receiver Skid Plate for Jeep Wrangler \u0026 Gladiator","description":"\u003cp\u003eProtect the most vulnerable point at the rear of your Jeep with the Rugged Ridge Hitch Receiver Skid Plate. Sliding into any standard 2-inch receiver, it shields your trailer hitch from rocks, ledges, and obstacles on the trail while pulling double duty as a sturdy step for reaching cargo and gear.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGuards your trailer hitch and rear undercarriage from trail damage and rock strikes\u003c\/li\u003e\n\u003cli\u003eDoubles as a rugged step for easy access to cargo areas and roof loads\u003c\/li\u003e\n\u003cli\u003eHeavy 1\/4-inch steel construction stands up to repeated off-road abuse\u003c\/li\u003e\n\u003cli\u003eTextured powder coat resists scratches, chips, and rust\u003c\/li\u003e\n\u003cli\u003eInstalls in under an hour with no drilling or modifications\u003c\/li\u003e\n\u003cli\u003eUniversal 2-inch receiver fit works across Wrangler and Gladiator platforms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Hitch Receiver Skid Plate\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch steel plate\u003c\/li\u003e\n\u003cli\u003eFinish: Textured black powder coat\u003c\/li\u003e\n\u003cli\u003eMounting: Fits any standard 2-inch receiver hitch\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year limited\u003c\/li\u003e\n\u003cli\u003eInstall difficulty: Level 1 (Beginner), under one hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Jeep models equipped with a standard 2-inch receiver hitch:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK (2-door and 4-door Unlimited)\u003c\/li\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler JL (2-door and 4-door Unlimited)\u003c\/li\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53227278762281,"sku":"18013.01","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f622d63a-cf7d-49f2-b891-0aaa9240ca7d.jpg?v=1780615605"},{"product_id":"afe-49-08047-p-scorpion-axle-back-exhaust-jeep-wrangler-jk","title":"aFe Scorpion Axle-Back Exhaust Aluminized for 2007-2018 Wrangler","description":"\u003cp\u003eThe aFe 49-08047-P Scorpion Series axle-back exhaust is a direct-fit rear-section upgrade for the 2007-2018 Jeep Wrangler JK 2-door and Wrangler Unlimited JK 4-door with the 3.6L or 3.8L V6. It replaces the restrictive factory axle-back section (from the rear axle back) with 2-1\/2 in aluminized-steel tubing and a free-flowing muffler for a deeper, more aggressive tone.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeeper, more aggressive exhaust note than stock, with controlled cruising volume to limit drone\u003c\/li\u003e\n\u003cli\u003e2-1\/2 in mandrel-bent aluminized-steel tubing with a free-flowing performance muffler\u003c\/li\u003e\n\u003cli\u003ePolished stainless-steel tip for a finished look at the rear\u003c\/li\u003e\n\u003cli\u003eReuses factory-style mounting points for a bolt-on install - no cutting or fabrication in most cases\u003c\/li\u003e\n\u003cli\u003eBacked by aFe's limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: aFe\u003c\/li\u003e\n\u003cli\u003ePart Number: 49-08047-P\u003c\/li\u003e\n\u003cli\u003eType: Axle-back exhaust (rear section)\u003c\/li\u003e\n\u003cli\u003eTube Diameter: 2-1\/2 in mandrel-bent\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminized steel with a polished stainless tip\u003c\/li\u003e\n\u003cli\u003eEmissions: Behind the catalytic converter - no CARB EO required, 50-state legal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2007-2018 Jeep Wrangler JK 2-door and Jeep Wrangler Unlimited JK 4-door with the 3.6L or 3.8L V6 (rear axle-back section). It does not fit the JL (2018 and later). For a full mid-pipe-back system, choose an aFe cat-back such as the 49-08043.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238650110249,"sku":"49-08047-P","price":457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_98f915e0-ad89-4dbe-b5da-ffe985f702fe.jpg?v=1781130591"},{"product_id":"afe-49-08043-cat-back-exhaust-jeep-wrangler-jk","title":"aFe Cat-Back Exhaust 2-1\/2 in for 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003eThe aFe 49-08043 Scorpion cat-back exhaust is a direct-fit performance upgrade for 2007-2018 Jeep Wrangler JK 2-door V6 models. Built with 2-1\/2 in mandrel-bent aluminized steel tubing, this hi-tuck exhaust system is designed to improve clearance, restore smooth exhaust flow, and add an aggressive tone.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-tuck clearance\u003c\/strong\u003e - Raised routing helps improve departure and approach angles for off-road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable aluminized steel construction\u003c\/strong\u003e - Mandrel-bent 2-1\/2 in tubing is built for dependable performance and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive sound\u003c\/strong\u003e - The included 13 in baffled muffler is engineered for a stronger exhaust note.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete installation package\u003c\/strong\u003e - OE-style bayonet hangers, band clamps, coupler, filter, and necessary hardware are included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit bolt-on design\u003c\/strong\u003e - Intended as a hassle-free replacement for compatible Jeep Wrangler JK applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system\u003c\/li\u003e\n\u003cli\u003e13 in baffled muffler\u003c\/li\u003e\n\u003cli\u003eOE-style bayonet hangers\u003c\/li\u003e\n\u003cli\u003eBand clamps\u003c\/li\u003e\n\u003cli\u003eCoupler\u003c\/li\u003e\n\u003cli\u003eFilter\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e aFe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 49-08043\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Diameter:\u003c\/strong\u003e 2-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Hi-Tuck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuffler:\u003c\/strong\u003e 13 in baffled muffler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissions:\u003c\/strong\u003e Does not require a CARB EO#\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007-2018 Jeep Wrangler JK (front)\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238650732841,"sku":"49-08043","price":568.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_22e9bd1f-d594-4806-bde8-ba1d445fce6b.jpg?v=1781130596"},{"product_id":"afe-54-13078r-magnum-force-stage-2-pro-5r-intake-jeep","title":"aFe Magnum FORCE Stage-2 Pro 5R Intake for 18-23 Wrangler JL","description":"\u003cp\u003eUnleash the full potential of your 3.6L Jeep Wrangler JL with the \u003cstrong\u003eaFe Magnum FORCE Stage-2 Cold Air Intake System w\/ Pro 5R Filter (54-13078R)\u003c\/strong\u003e. Engineered for real-world performance, this intake is designed to dramatically improve airflow compared to the restrictive factory airbox, helping your engine breathe deeper and respond faster.\u003c\/p\u003e\n\n\u003cp\u003eAt the core of this system is an \u003cstrong\u003e8-inch tall, 360-degree radial flow performance air filter\u003c\/strong\u003e with a large 4.5-inch flange and aFe's proven \u003cstrong\u003ePro 5R oiled cotton gauze media\u003c\/strong\u003e. The five layers of progressively finer cotton gauze are pre-oiled to deliver excellent filtration while maintaining high airflow, making it ideal for drivers looking for both power and protection.\u003c\/p\u003e\n\n\u003cp\u003eA computer-designed, \u003cstrong\u003eroto-molded intake tube\u003c\/strong\u003e optimizes airflow from the filter to the throttle body, minimizing turbulence and restriction for smooth, consistent power delivery. This is paired with a lightweight, vacuum-formed plastic cover that helps shield the filter from hot under-hood air, reducing intake temperatures and contributing to improved performance under load.\u003c\/p\u003e\n\n\u003cp\u003eThe Magnum FORCE Stage-2 system includes high-quality \u003cstrong\u003esilicone couplers, clamps, and premium hardware\u003c\/strong\u003e for a secure, leak-free installation. It is designed as a \u003cstrong\u003edirect bolt-on upgrade\u003c\/strong\u003e, requiring no cutting or drilling of OEM components, so you can revert to stock at any time if needed.\u003c\/p\u003e\n\n\u003cp\u003eKey benefits include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8\" tall 360° radial flow Pro 5R oiled cotton gauze performance filter for maximum airflow and filtration\u003c\/li\u003e\n  \u003cli\u003eRoto-molded intake tube engineered for smooth, high-volume air delivery\u003c\/li\u003e\n  \u003cli\u003eLightweight protective cover helps reduce intake noise and shields the filter from engine heat\u003c\/li\u003e\n  \u003cli\u003ePremium clamps and silicone couplers included for a durable, reliable seal\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on design for straightforward installation using common hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis aFe Magnum FORCE Stage-2 Cold Air Intake System is an excellent choice for Wrangler JL owners who want a noticeable increase in intake sound, improved throttle response, and a performance-focused intake solution from a trusted brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant fitment:\u003c\/strong\u003e This part is specific to \u003cstrong\u003e3.6L\u003c\/strong\u003e models. Please verify your exact trim, engine and bed before ordering.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238651552041,"sku":"54-13078R","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_5a40a2af-db76-4a56-afeb-c02704bc51d8.jpg?v=1781130615"},{"product_id":"afe-46-71010b-pro-series-front-diff-cover-jeep-wrangler-jl","title":"aFe Pro Series Front Diff Cover Dana M186 for 2018-23 Wrangler","description":"\u003cp\u003eUpgrade the front end of your Jeep Wrangler JL with the \u003cstrong\u003eaFe Pro Series Front Differential Cover (46-71010B)\u003c\/strong\u003e, engineered specifically for the \u003cstrong\u003eDana M186\u003c\/strong\u003e front axle. Designed for enthusiasts who push their Jeeps on and off the road, this cover delivers a smart combination of strength, cooling efficiency, and style.\u003c\/p\u003e\n\n\u003cp\u003eThis aFe differential cover is constructed from \u003cstrong\u003edurable cast aluminum\u003c\/strong\u003e with \u003cstrong\u003ereinforced ribs\u003c\/strong\u003e to help protect your ring and pinion from trail impacts and heavy use. The robust design adds rigidity to the housing area compared to a thin stamped steel factory cover, making it an excellent upgrade for lifted, larger-tire, or regularly off‑roaded vehicles.\u003c\/p\u003e\n\n\u003cp\u003eTo manage heat and help extend the life of your gear oil, the cover features \u003cstrong\u003emachined external fins\u003c\/strong\u003e that increase surface area for improved cooling and more consistent differential temperatures in demanding conditions. Many aFe covers also increase fluid capacity versus stock, which further contributes to better thermal control and lubrication stability under load.\u003c\/p\u003e\n\n\u003cp\u003eThe Pro Series front differential cover is finished in a clean \u003cstrong\u003eblack coating\u003c\/strong\u003e with machined fins that complement factory and aftermarket components for a subtle yet performance‑oriented appearance. It is designed as a \u003cstrong\u003ebolt-on replacement\u003c\/strong\u003e for the Dana M186 front axle cover and includes the necessary hardware for a straightforward installation on compatible Jeep Wrangler JL models. For the best results and proper sealing, professional installation and careful torque and fluid procedures are recommended.\u003c\/p\u003e\n\n\u003cp\u003eWhether you are tackling rocky trails, towing, or simply want better protection and cooling for your front differential, the aFe Pro Series Front Differential Cover 46-71010B is a functional and cosmetic upgrade over the factory cover. It helps safeguard your gears, supports more stable operating temperatures, and gives your Jeep Wrangler JL’s front axle a purposeful performance look.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific design for the Dana M186 front axle on Jeep Wrangler JL models\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty cast aluminum construction with reinforced ribs for added strength\u003c\/li\u003e\n  \u003cli\u003eMachined external fins to promote better heat dissipation and oil life\u003c\/li\u003e\n  \u003cli\u003eBlack finish with machined fins for a clean, performance appearance\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on replacement cover with hardware for compatible vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVerify axle type and vehicle compatibility before purchase and installation. This listing is for the front differential cover only; gear oil and additional installation supplies are not included.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238664233257,"sku":"46-71010B","price":365.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_16c90772-5435-4bf9-b702-e7ebca8721ec.jpg?v=1781130754"},{"product_id":"afe-46-71030b-pro-series-front-diff-cover-dana-m210","title":"aFe Pro Series Front Diff Cover Dana M210 for 18-19 Wrangler JL","description":"\u003cp\u003eThe aFe Power Pro Series front differential cover for Jeep Dana M210 axles upgrades the strength, cooling, and serviceability of your Jeep Wrangler JL or Gladiator JT Dana M210 front axle. This cast aluminum Dana M210 diff cover features a wrinkle-black finish with machined fins, a built-in sight glass, and dual magnetic plugs to better protect your gears.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStronger housing protection\u003c\/strong\u003e - Durable cast aluminum construction with reinforced ribs provides increased rigidity and impact resistance compared to factory stamped steel covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved heat dissipation\u003c\/strong\u003e - Wrinkle-black powder-coated finish with machined cooling fins helps shed heat and maintain more consistent differential fluid temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier fluid checks and fill\u003c\/strong\u003e - Large oil level sight glass and calibration plug set at the factory fill level make it simple to fill correctly and visually check fluid condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced gear protection\u003c\/strong\u003e - Dual neodymium magnetic plugs pull metal particles from the gear oil to help reduce wear on internal differential components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-friendly design\u003c\/strong\u003e - Pro Series design with included filter and coupler supports cleaner, more convenient fluid service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eaFe Power Pro Series front differential cover (Dana M210) finished in wrinkle-black with machined fins\u003c\/li\u003e\n\u003cli\u003eFilter\u003c\/li\u003e\n\u003cli\u003eCoupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e aFe Power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle compatibility:\u003c\/strong\u003e Jeep Dana M210 front axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Wrinkle-black powder coat with machined fins\u003c\/li\u003e\n\n\n\u003cli\u003e\n\u003cstrong\u003eMagnetic plugs:\u003c\/strong\u003e Dual neodymium magnetic plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil level sight glass:\u003c\/strong\u003e Integrated, with calibration plug set to factory oil level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement front differential cover for the Jeep Dana M210 (Rubicon) front axle:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2018-2023 Jeep Wrangler JL (front, Dana M210 axle)\u003c\/li\u003e\n\u003cli\u003e2020-2023 Jeep Gladiator JT (front, Dana M210 axle)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238664266025,"sku":"46-71030b","price":328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8248232e-d64e-431c-b406-f66f57adf28a.jpg?v=1781130760"},{"product_id":"diode-dynamics-dd5166-elite-led-headlights-jeep-jl-jt","title":"Diode Dynamics Elite LED Headlights for 2018-2024 Wrangler JL","description":"\u003cp\u003eDiode Dynamics Elite LED Headlights DD5166 are a complete pair of front headlamps engineered specifically for the Jeep JL Wrangler and JT Gladiator. Designed around a powerful bi-LED projector, these Elite Series headlights deliver a major upgrade in output, style, and functionality compared to factory lights.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum road visibility\u003c\/strong\u003e - Bi-LED projector design provides intense, focused low and high beams to light up the trail or highway with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern Jeep styling\u003c\/strong\u003e - Bright halo daytime running light with selectable color gives your Wrangler or Gladiator a distinctive, premium look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated turn signal\u003c\/strong\u003e - Built-in amber turn signal cleans up the front end and enhances visibility to other drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium welcome sequence\u003c\/strong\u003e - Modern welcome animation adds an upscale touch every time you unlock or start your Jeep.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific fit\u003c\/strong\u003e - Designed for the JL Wrangler and JT Gladiator for a direct-fit replacement of both factory headlights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Jeep Elite LED Headlamps (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diode Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e DD5166\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e LED headlight assembly, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight source:\u003c\/strong\u003e Bi-LED projector for low and high beam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaytime running light:\u003c\/strong\u003e Selectable color DRL halo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn signal:\u003c\/strong\u003e Integrated amber turn signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial features:\u003c\/strong\u003e Modern welcome sequence\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front headlights (left and right, pair)\u003c\/li\u003e\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2018-2024 Jeep Wrangler JL (front headlights)\u003c\/li\u003e\n\u003cli\u003e2020-2024 Jeep Gladiator JT (front headlights)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":53238821552425,"sku":"DD5166","price":899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_920b67ed-7a07-42b6-b90f-84587755995e.jpg?v=1781130878"},{"product_id":"go-rhino-trailline-stubby-rear-bumper-jeep-wrangler-jl-272110t","title":"Go Rhino Trailline Stubby Rear Bumper for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003eTake your Jeep Wrangler JL to the trail with confidence. The Go Rhino Trailline Stubby Rear Bumper is a heavy-duty plate steel rear bumper engineered for the 2018-2025 Wrangler JL, combining a tire-clearing stubby profile with rugged recovery-ready hardware.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStubby profile maximizes tire clearance for larger tires and lifted builds\u003c\/li\u003e\n\u003cli\u003eWide center cutout accommodates an oversized spare tire\u003c\/li\u003e\n\u003cli\u003eIntegrated Rhino Hook tow hook and shackle mounts for trail recovery\u003c\/li\u003e\n\u003cli\u003eTwo-stage textured black powder coat resists corrosion and looks aggressive\u003c\/li\u003e\n\u003cli\u003eZinc-plated hardware adds extra corrosion protection\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no cutting or drilling required\u003c\/li\u003e\n\u003cli\u003eVehicle-specific hardware and installation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailline stubby rear bumper\u003c\/li\u003e\n\u003cli\u003eTwo Rhino Hook tow hook \/ shackle mounts\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Heavy-duty plate steel (carbon steel)\u003c\/li\u003e\n\u003cli\u003eFinish: Two-stage textured black powder coat\u003c\/li\u003e\n\u003cli\u003eStyle: Stubby rear bumper\u003c\/li\u003e\n\u003cli\u003eHardware: Zinc-plated\u003c\/li\u003e\n\u003cli\u003eWarranty: Limited lifetime structural, 5-year finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL, both 2-door and 4-door (JLU) models. Bolt-on installation with no cutting or drilling.\u003c\/p\u003e","brand":"Go Rhino","offers":[{"title":"Default Title","offer_id":53238915301673,"sku":"272110T","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_9cb84a24-91e6-4b61-b35d-af440969ac8b.jpg?v=1781130968"},{"product_id":"rugged-ridge-spartacus-hd-wheel-mount-wrangler-jl-18-25","title":"Rugged Ridge Spartacus HD Wheel Mount for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eUpgrade your Jeep Wrangler JL's spare-tire setup with the Rugged Ridge Spartacus HD Tire Carrier Wheel Mount, engineered to carry oversized tires with confidence on and off the trail.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty cast aluminum construction stands up to trail abuse and resists corrosion\u003c\/li\u003e\n\u003cli\u003eAccommodates spare tires up to 40 inches for serious off-road builds\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting brackets let you angle the spare for easier liftgate access and added bumper clearance\u003c\/li\u003e\n\u003cli\u003eReuses the factory stud plate and studs for a clean, direct fit\u003c\/li\u003e\n\u003cli\u003eIncludes brackets to relocate the back-up camera and third brake light\u003c\/li\u003e\n\u003cli\u003eSatin black powder-coat finish for a tough, factory-style appearance\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation with no drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWheel mount\u003c\/li\u003e\n\u003cli\u003eStud plate\u003c\/li\u003e\n\u003cli\u003eCamera shield\u003c\/li\u003e\n\u003cli\u003eBrake light mount\u003c\/li\u003e\n\u003cli\u003eLug nuts\u003c\/li\u003e\n\u003cli\u003eM8 button head bolts, M8 hex head bolts, and M8 washers\u003c\/li\u003e\n\u003cli\u003eSpacer plates\u003c\/li\u003e\n\u003cli\u003eM12 hex head bolts, M12 washers, and M12 lock nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: heavy-duty cast aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: satin black powder coat\u003c\/li\u003e\n\u003cli\u003eMaximum tire size: up to 40 inches\u003c\/li\u003e\n\u003cli\u003eInstallation: direct bolt-on, no drilling required\u003c\/li\u003e\n\u003cli\u003eRequires separately sold Spartacus HD hinge casting\u003c\/li\u003e\n\u003cli\u003e5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL, both 2-door and 4-door (JLU) models. NOT compatible with models equipped with the 4xe pedestrian warning speaker or the Rubicon 392 camera shield. Requires the separately sold Spartacus HD tire carrier hinge casting to complete the carrier system.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53238915367209,"sku":"11546.57","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8066db06-6fdc-41ad-acc8-a8d00995b349.jpg?v=1781130975"},{"product_id":"n-fab-nerf-step-w2w-gloss-black-jeep-wrangler-jl-4-door-j1866-gb","title":"N-Fab Nerf Step W2W Gloss Black for 2018-2025 Jeep Wrangler JL 4-Door","description":"\u003cp\u003eStep up to your Jeep Wrangler JL with confidence on the N-Fab J1866-GB Nerf Step bars. This wheel-to-wheel system gives front and rear passengers a sure, slip-resistant place to step while adding aggressive off-road styling to your 4-Door JL.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented drop-step hoop design positions the step right where you need it for easy entry and exit\u003c\/li\u003e\n\u003cli\u003eWheel-to-wheel coverage serves both front and rear doors\u003c\/li\u003e\n\u003cli\u003eOne-piece construction holds over 465 lbs for dependable, everyday strength\u003c\/li\u003e\n\u003cli\u003eBuilt high and tight to the body to help hide the frame and maintain ground clearance\u003c\/li\u003e\n\u003cli\u003eNo-drill, bolt-on installation with vehicle-specific hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo (2) wheel-to-wheel Nerf Step bars (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinish: Gloss Black powder coat\u003c\/li\u003e\n\u003cli\u003eMain tube: 3-inch diameter heavy-duty steel\u003c\/li\u003e\n\u003cli\u003eConfiguration: Wheel-to-wheel (W2W)\u003c\/li\u003e\n\u003cli\u003eStep style: Patented drop-step with perforated tread\u003c\/li\u003e\n\u003cli\u003eLoad rating: Over 465 lbs\u003c\/li\u003e\n\u003cli\u003eInstallation: No-drill, bolt-on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL 4-Door (JLU) models only. Not compatible with 2-Door Wrangler JL or Jeep Gladiator JT. Removal of rock rails is required if equipped.\u003c\/p\u003e","brand":"N-Fab","offers":[{"title":"Default Title","offer_id":53238915432745,"sku":"J1866-GB","price":315.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0e579ccf-98e8-4c3f-9b8f-37788d6e7fb1.jpg?v=1781130986"},{"product_id":"go-rhino-rockline-stubby-rear-bumper-jeep-wrangler-jl-371100t","title":"Go Rhino Rockline Stubby Rear Bumper for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eTrim down your tail end and open up the trail with the Go Rhino Rockline Rear Stubby Bumper, built to take a beating on your 2018-2025 Jeep Wrangler JL. Its ultra-slim profile clears the way for larger tires and steeper departure angles while keeping serious recovery hardware right where you need it.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUltra-slim stubby design maximizes rear tire clearance and departure angle\u003c\/li\u003e\n\u003cli\u003eHeavy-duty welded steel construction stands up to hard trail use\u003c\/li\u003e\n\u003cli\u003eDual-function Rhino Hooks double as recovery points and shackle mounts\u003c\/li\u003e\n\u003cli\u003eIntegrated light mounts accept 3-inch cube LEDs for added rear visibility\u003c\/li\u003e\n\u003cli\u003eSteel hex-mesh accent panels add aggressive styling and light protection\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no cutting or drilling required\u003c\/li\u003e\n\u003cli\u003eTextured black finish resists scratches, chips, and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRockline rear stubby bumper\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eLicense plate relocation kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: fully welded steel\u003c\/li\u003e\n\u003cli\u003eFinish: textured black powder coat\u003c\/li\u003e\n\u003cli\u003eRhino Hooks: 1-inch thick, accept up to 7\/8-inch D-rings\u003c\/li\u003e\n\u003cli\u003eLighting: LED-ready, accepts 3-inch cube lights\u003c\/li\u003e\n\u003cli\u003eStyle: rear stubby \/ ultra-slim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL, including both 2-Door and 4-Door (JLU) models, across all trims and engine configurations. Does not fit Jeep Gladiator JT.\u003c\/p\u003e","brand":"Go Rhino","offers":[{"title":"Default Title","offer_id":53238915498281,"sku":"371100T","price":619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_22784fc9-d836-4471-a01b-27a56d058973.jpg?v=1781130993"},{"product_id":"bushwacker-flat-style-fender-flares-4pc-jeep-wrangler-jl-10923-07","title":"Bushwacker Flat Style Fender Flares 4pc for 2018-2025 Jeep Wrangler JL","description":"\u003cp\u003eRun bigger tires and get the aggressive, trimmed-down look without the factory overhang. The Bushwacker Flat Style Fender Flares give your 2018-2025 Jeep Wrangler JL or JLU a clean, low-profile stance while adding real tire coverage and trail-ready clearance.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases tire clearance by up to 2 inches for taller, wider tires\u003c\/li\u003e\n\u003cli\u003eFlat, trimmed-down profile delivers an aggressive off-road look\u003c\/li\u003e\n\u003cli\u003eNo-cut, no-drill installation using existing factory mounting points\u003c\/li\u003e\n\u003cli\u003eDOT-compliant LED side marker lights and reflectors keep your Jeep street legal\u003c\/li\u003e\n\u003cli\u003eOE matte black smooth finish resists chalking and is 100% UV-protected\u003c\/li\u003e\n\u003cli\u003eDurable thermoplastic olefin (TPO) construction stands up to trail abuse\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront driver side flare\u003c\/li\u003e\n\u003cli\u003eFront passenger side flare\u003c\/li\u003e\n\u003cli\u003eRear driver side flare\u003c\/li\u003e\n\u003cli\u003eRear passenger side flare\u003c\/li\u003e\n\u003cli\u003eLED marker lights\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet quantity: 4-piece (full vehicle set)\u003c\/li\u003e\n\u003cli\u003eMaterial: Thermoplastic olefin (TPO)\u003c\/li\u003e\n\u003cli\u003eFinish: OE matte black, smooth, UV-protected\u003c\/li\u003e\n\u003cli\u003eTire clearance increase: up to 2 inches\u003c\/li\u003e\n\u003cli\u003eMarker lights: DOT-compliant LED side markers and reflectors\u003c\/li\u003e\n\u003cli\u003eInstallation: No drilling, factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL (2-Door) and Jeep Wrangler Unlimited JLU (4-Door). Does not fit Jeep Gladiator JT.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":53238915563817,"sku":"10923-07","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_eed1dcf6-d8b9-49fb-a5c2-7a91c920b08d.jpg?v=1781131004"},{"product_id":"bushwacker-flat-style-fender-flares-wrangler-jl-11950-07","title":"Bushwacker Flat Style Fender Flares 4pc for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eGive your 2018-2025 Jeep Wrangler JL a flat, aggressive trail-ready stance with the Bushwacker Flat Style (Hyperform) Fender Flares. This 4-piece set covers all four corners with a low-profile design that pairs clean styling with the protection you need on and off the trail.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlat, low-profile styling for an aggressive, trail-ready look\u003c\/li\u003e\n\u003cli\u003eIntegrated DOT-approved LED turn signals on the front flares\u003c\/li\u003e\n\u003cli\u003eDurable impact-resistant ABS thermoplastic survives trail abuse and debris\u003c\/li\u003e\n\u003cli\u003eDual-textured matte black finish hides scratches and resists UV fade\u003c\/li\u003e\n\u003cli\u003eAdds tire coverage and clearance at all four corners\u003c\/li\u003e\n\u003cli\u003eBacked by Bushwacker's limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront and rear fender flares (4-piece set)\u003c\/li\u003e\n\u003cli\u003eIntegrated DOT-approved LED turn signals (front flares)\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware and bracketry\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStyle: Flat Style (Hyperform)\u003c\/li\u003e\n\u003cli\u003ePieces: 4 (front and rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS thermoplastic\u003c\/li\u003e\n\u003cli\u003eFinish: Dual-textured black\u003c\/li\u003e\n\u003cli\u003eLighting: Integrated DOT-approved LED turn signals (front)\u003c\/li\u003e\n\u003cli\u003eInstallation: Some cutting and drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL, both 2-door and 4-door (JLU) models. Confirmed by the manufacturer for this MPN; does not fit the Jeep Gladiator JT.\u003c\/p\u003e","brand":"Bushwacker","offers":[{"title":"Default Title","offer_id":53238915662121,"sku":"11950-07","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_63626d3a-74d7-449b-9acd-2509e7fb675f.jpg?v=1781131010"},{"product_id":"diode-dynamics-ss6-cowl-led-light-bar-kit-jeep-wrangler-jl-gladiator-jt","title":"Diode Dynamics SS6 Cowl LED Light Bar Kit for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eAdd powerful auxiliary lighting to your Jeep without touching the bumper. The Diode Dynamics SS6 Cowl LED Light Bar Kit mounts a pair of Stage Series 6-inch light bars to the cowl using application-specific brackets that bolt to factory points for a clean, drill-free install on the 2018-2025 Jeep Wrangler JL and 2020-2025 Gladiator JT.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds high-output forward lighting using the cowl, leaving your bumper free for a winch or recovery gear\u003c\/li\u003e\n\u003cli\u003eCAD-designed brackets bolt to factory mounting points with no cutting or drilling\u003c\/li\u003e\n\u003cli\u003ePlug-in OEM auxiliary-switch harness lets you control the lights from the factory switches\u003c\/li\u003e\n\u003cli\u003eFits both 2-Door and 4-Door (Unlimited) JL bodies and the Gladiator JT\u003c\/li\u003e\n\u003cli\u003eStage Series SS6 bars deliver 1400 measured lumens each with focused TIR optics\u003c\/li\u003e\n\u003cli\u003eMount supports pods, a single bar, or a 7-inch driving light for flexible builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo (2) SS6 Stage Series 6-inch LED light bars\u003c\/li\u003e\n\u003cli\u003eTwo (2) application-specific cowl-mount brackets\u003c\/li\u003e\n\u003cli\u003eTwo (2) U-brackets\u003c\/li\u003e\n\u003cli\u003eOEM auxiliary-switch wiring harness and a light-duty wiring harness\u003c\/li\u003e\n\u003cli\u003eSix (6) Delrin spacers and six (6) bolts\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLight source: two SS6 Stage Series 6-inch LED bars\u003c\/li\u003e\n\u003cli\u003eOutput: 1400 measured lumens per bar (2280 raw lumens)\u003c\/li\u003e\n\u003cli\u003eOptics: focused TIR for high efficiency\u003c\/li\u003e\n\u003cli\u003eMounting: cowl, factory points, no drilling\u003c\/li\u003e\n\u003cli\u003eWiring: plug-in factory auxiliary-switch harness included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2018-2025 Jeep Wrangler JL (2-Door and 4-Door Unlimited) and the 2020-2025 Jeep Gladiator JT. Does not fit Mojave or Rubicon 392 Edition Jeeps due to their taller hood and cowl.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":53238915694889,"sku":"DD6092","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0bad4089-b651-45cc-a052-33423fd1819c.jpg?v=1781131015"},{"product_id":"kn-aircharger-cold-air-intake-jeep-wrangler-jl-2-0l-63-1580","title":"K\u0026N AirCharger Cold Air Intake for 18-23 Jeep Wrangler JL 2.0L","description":"\u003cp\u003eThe K\u0026amp;N 63-1580 is a 63-series AirCharger cold air intake for the 2018-2023 Jeep Wrangler JL 2.0L turbo with an enclosed air box and roto-molded tube for more airflow.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGuaranteed increase in horsepower and torque over the factory intake\u003c\/li\u003e\n\u003cli\u003eWashable, reusable K\u0026amp;N High-Flow air filter (RU-2815) lasts the life of the vehicle\u003c\/li\u003e\n\u003cli\u003eEnclosed air box keeps hot engine-bay air off the filter for a cooler charge\u003c\/li\u003e\n\u003cli\u003eRoto-molded HDPE intake tube increases airflow volume\u003c\/li\u003e\n\u003cli\u003eInstalls in about an hour with hand tools, no tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Jeep Wrangler (2018-2023). Fits the 2.0L turbo only — not the 3.6L V6 or 3.0L EcoDiesel Wrangler. CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThe 63-1580 fits the 2.0L turbo JL; for the 3.6L Pentastar V6 Wrangler and Gladiator, use the K\u0026amp;N 71-1576 Blackhawk intake instead.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53238915727657,"sku":"63-1580","price":367.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_ee884abd-93e6-4497-a46d-d5698b0a16f3.jpg?v=1781131021"},{"product_id":"baja-designs-dot-lp6-led-headlight-kit-jeep-wrangler-jl-gladiator-jt","title":"Baja Designs DOT LP6 LED Headlight Kit for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eUpgrade your Jeep's forward lighting with the Baja Designs DOT LP6 LED Headlight Kit, the brand's first street-legal LED headlight built specifically for the Wrangler JL and Gladiator JT. It drops into the factory headlight buckets for a clean, OEM-style fit while delivering serious off-road-grade output.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoad-legal design that complies with FMVSS 108 standards\u003c\/li\u003e\n\u003cli\u003eIntegrated low and high beam in a single LED headlight\u003c\/li\u003e\n\u003cli\u003eAmber daytime running lights for a distinctive, aggressive look\u003c\/li\u003e\n\u003cli\u003eVehicle-specific brackets for a true plug-and-play installation\u003c\/li\u003e\n\u003cli\u003eCrisp 5000K color temperature for natural, fatigue-free night vision\u003c\/li\u003e\n\u003cli\u003eBacked by the Baja Designs lifetime limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo DOT LP6 LED headlights with amber daytime running lights\u003c\/li\u003e\n\u003cli\u003eFour JL\/JT-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eTwo LED wiring harnesses\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow beam: 3,480 raw lumens | 42,568.7 candela\u003c\/li\u003e\n\u003cli\u003eHigh beam: 5,280 raw lumens | 62,611.5 candela\u003c\/li\u003e\n\u003cli\u003eColor temperature: 5000K\u003c\/li\u003e\n\u003cli\u003eCompliance: FMVSS 108 (DOT)\u003c\/li\u003e\n\u003cli\u003eDaytime running light: Amber\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL (2-door and 4-door) and 2020-2025 Jeep Gladiator JT. Designed for vehicles equipped with factory LED headlights only; not compatible with halogen-equipped models.\u003c\/p\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":53238915793193,"sku":"448303","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_70299b05-470f-405c-93af-e28ad52bc64b.jpg?v=1781131026"},{"product_id":"rugged-ridge-venator-stubby-front-bumper-jeep-wrangler-jl-gladiator-jt-11549-45","title":"Rugged Ridge Venator Stubby Front Bumper 18-25 Jeep Wrangler JL","description":"\u003cp\u003eConquer the trail with the Rugged Ridge Venator Stubby Front Bumper, a chiseled, boulder-scaling steel front bumper that delivers serious off-road capability and modern styling for your Jeep. Its narrow stubby profile maximizes approach angles and tire clearance while the integrated overrider bar adds front-end protection and presence.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStubby design improves approach angle and clears larger tires for aggressive off-road driving\u003c\/li\u003e\n\u003cli\u003eBuilt-in winch tray lets you mount a recovery winch for self-recovery on the trail\u003c\/li\u003e\n\u003cli\u003eIntegrated overrider bar adds front-end protection and a rugged, purposeful look\u003c\/li\u003e\n\u003cli\u003eHeavy-duty stamped steel construction stands up to rocks, brush and trail impacts\u003c\/li\u003e\n\u003cli\u003eIntegrated fog light mounts let you retain or upgrade your front lighting\u003c\/li\u003e\n\u003cli\u003eDurable satin-black powder-coat finish resists corrosion and abrasion\u003c\/li\u003e\n\u003cli\u003eBeefy 1-inch thick tow hook mounts ready for recovery hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVenator stubby front bumper\u003c\/li\u003e\n\u003cli\u003eOverrider bar\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStyle: Stubby front bumper with overrider bar\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty stamped steel\u003c\/li\u003e\n\u003cli\u003eFinish: Satin black powder coat\u003c\/li\u003e\n\u003cli\u003eWinch tray: Built in, accepts a recovery winch\u003c\/li\u003e\n\u003cli\u003eFog light mounts: Integrated\u003c\/li\u003e\n\u003cli\u003eTow hook mounts: 1-inch thick (tow hooks\/D-rings sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL (2-door and 4-door Unlimited) and 2020-2025 Jeep Gladiator JT. Does NOT fit Mojave Edition models due to interference with the factory remote shock reservoirs.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53238916514089,"sku":"11549.45","price":1079.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0af10fbd-333a-4166-9de7-1f1d2bd4ebf1.jpg?v=1781131035"},{"product_id":"diode-dynamics-elite-max-led-headlights-jeep-wrangler-jl-gladiator-jt-dd5165","title":"Diode Dynamics Elite Max LED Headlights for 18-25 Jeep Wrangler JL","description":"\u003cp\u003eUpgrade your Jeep with the brightest, most feature-packed headlights on the market. The Diode Dynamics Elite Max LED Headlights deliver class-leading output, a sharp legal cutoff, and a full suite of programmable lighting features in a plug-and-play package engineered and assembled in the USA.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMassive output with 917 lumens on low beam and 1398 lumens on high beam for confident night driving\u003c\/li\u003e\n\u003cli\u003eModern bi-LED rectangular projectors produce an intense, focused beam with a clean cutoff\u003c\/li\u003e\n\u003cli\u003eProgrammable selectable-color daytime running light you can change on the fly from inside the cab\u003c\/li\u003e\n\u003cli\u003eSwitchback amber turn signal integrated into the DRL halo for a clean, modern look\u003c\/li\u003e\n\u003cli\u003ePatent-pending off-road Trail Light adds a wide auxiliary beam when the pavement ends\u003c\/li\u003e\n\u003cli\u003eShow Mode offers four selectable patterns plus a welcome sequence on unlock\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation backed by an 8-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo (2) Elite Max LED headlamps (left and right pair)\u003c\/li\u003e\n\u003cli\u003eTwo (2) adapter harnesses\u003c\/li\u003e\n\u003cli\u003eOne (1) DRL auxiliary tap harness\u003c\/li\u003e\n\u003cli\u003eOne (1) adjuster tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow beam output: 917 lumens\u003c\/li\u003e\n\u003cli\u003eHigh beam output: 1398 lumens\u003c\/li\u003e\n\u003cli\u003eHigh beam draw: 51.01 watts\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000K\u003c\/li\u003e\n\u003cli\u003eProjector: bi-LED rectangular\u003c\/li\u003e\n\u003cli\u003eSize: 9-inch\u003c\/li\u003e\n\u003cli\u003eDRL: selectable color, programmable\u003c\/li\u003e\n\u003cli\u003eTurn signal: switchback amber\u003c\/li\u003e\n\u003cli\u003eWarranty: 8-year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL (2-door and 4-door JLU, all trims including Sport, Sahara, Rubicon, and 392) and 2020-2025 Jeep Gladiator JT. Plug-and-play with light wiring for the DRL tap. Sold as a pair.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":53238916546857,"sku":"DD5165","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_4afb0e62-6b01-47b4-9172-894bcbddb416.jpg?v=1781131042"}],"url":"https:\/\/www.dirtmasters.com\/collections\/jeep-wrangler-2007-2018.oembed?page=4","provider":"Dirt Masters","version":"1.0","type":"link"}