{"title":"ATV \/ Quad","description":"\u003cp\u003eATV parts — tires \u0026amp; wheels, axles, suspension, body protection.\u003c\/p\u003e","products":[{"product_id":"14-1001","title":"All Balls Chaincase Bearing \u0026 Seal Kit for Polaris ATV","description":"\u003cp\u003eThe \u003cstrong\u003eALL BALLS RACING 14-1001 Chaincase Bearing and Seal Kit\u003c\/strong\u003e is a performance-focused replacement solution for worn or noisy drivetrains on select Polaris snowmobiles. Built to OEM-equivalent standards, this kit is designed to refresh critical support points in the chaincase and jackshaft area so you can regain smooth, consistent power delivery to the track.\u003c\/p\u003e\n\n\u003cp\u003eAs chaincase components wear, bearings can develop play and seals can allow moisture and debris to enter the housing. This leads to accelerated wear, additional friction and potential drivetrain failure. The All Balls 14-1001 kit addresses these issues in one convenient package, helping you restore reliability while simplifying your parts selection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete bearing and seal solution\u003c\/strong\u003e – Kits include both bearings, seals, O-rings and miscellaneous components as needed for the chaincase and jackshaft\/drive track outer support area.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupports jackshaft and chaincase\u003c\/strong\u003e – Jackshaft-style kits are configured for the chain case bearing and outer support bearing to maintain proper shaft alignment and smooth rotation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContamination control\u003c\/strong\u003e – Quality seals and O-rings help keep snow, water and debris out of the chaincase to extend drivetrain life and reduce maintenance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM-equivalent fit and function\u003c\/strong\u003e – Components are engineered to meet or exceed original specifications for reliable performance and straightforward installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation\u003c\/strong\u003e – Direct-fit design allows experienced DIY owners or technicians to replace old parts without modification when used on listed applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication and fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis drivetrain kit is cataloged for use on a range of \u003cstrong\u003ePolaris snowmobiles\u003c\/strong\u003e, including multiple Indy 400 and Indy 500 variants within the late-1980s to 1990 model years, along with other compatible models in that family. Always verify year, model and chaincase\/jackshaft configuration against your vehicle before ordering or installing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAll Balls Racing: \u003cstrong\u003e14-1001\u003c\/strong\u003e\n\u003c\/li\u003e\n  \n  \n\u003c\/ul\u003e\n\n\u003cp\u003eIf your Polaris snowmobile shows signs of bearing noise, excessive shaft play or leaking chaincase seals, the ALL BALLS RACING 14-1001 Chaincase Bearing and Seal Kit offers a focused, drivetrain-specific solution. Replace tired components with a matched kit and restore the smooth, reliable operation your sled was built to deliver.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":31056841998383,"sku":"14-1001","price":44.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/292f-572a52d0f313b.jpg?v=1780117782"},{"product_id":"all-balls-19-5038-ez-trail-cv-boot-xl-installation-kit","title":"All Balls EZ Trail CV Boot XL Kit for Arctic Cat UTVs","description":"\u003cp\u003eThe All Balls Racing EZ Trail CV Boot XL Universal Installation Kit 19-5038 is a universal CV boot and tool solution for Arctic Cat ATV and UTV axles. Designed for fast, on-the-trail or in-garage repairs, this XL boot kit lets you replace damaged CV boots on a wide range of Arctic Cat models without removing the axle from the machine.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrail-side CV boot repair\u003c\/strong\u003e - Universal XL boot and cone tool allow you to service a torn CV boot on your Arctic Cat without pulling the axle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Arctic Cat coverage\u003c\/strong\u003e - Fits front and rear axle positions on many 1998-2018 Arctic Cat ATV and UTV models listed in the fitment chart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation with cone tool\u003c\/strong\u003e - Cone-style installer stretches the boot over the CV joint to reduce install time and effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable off-road performance\u003c\/strong\u003e - Heavy-duty boot construction is built to handle mud, water, and debris encountered in powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact kit for shop or trail bag\u003c\/strong\u003e - Keep this kit with your machine so you are ready to address CV boot issues before they become axle failures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll Balls Racing EZ Trail XL universal CV boot\u003c\/li\u003e\n\u003cli\u003eCV boot cone installation tool\u003c\/li\u003e\n\u003cli\u003eBoot clamps\u003c\/li\u003e\n\u003cli\u003eGrease packet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 19-5038\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit type:\u003c\/strong\u003e EZ Trail CV Boot XL Universal Installation Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Arctic Cat ATV\/UTV CV axles (front and rear positions on listed models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot included:\u003c\/strong\u003e Yes, XL universal CV boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation tool included:\u003c\/strong\u003e Yes, cone-style boot installer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.94 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 12.0 in L x 4.0 in W x 4.0 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement universal CV boot kit for front and rear axle positions on the 114 Arctic Cat ATV and UTV applications from 1998-2018 listed in the DB Electrical fitment chart for part number 19-5038, including models such as the Arctic Cat 1000 LTD Mudpro, 1000 TRV, 1000 TRV \/ Cruiser, 1000 TRV GT, 1000 TRV XT\/LTD and many more.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1998-2018 Arctic Cat ATV and UTV models as listed in the full fitment chart (front and rear axle positions where 19-5038 is specified)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplaces OEM Part(s): OEM CV boot applications where All Balls Racing 19-5038 EZ Trail CV Boot XL universal kit is specified as a service replacement.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":31058059231279,"sku":"19-5038","price":44.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/ce89-5b06f4bde7c04.jpg?v=1780118073"},{"product_id":"47-1002","title":"All Balls 47-1002 Fuel Pump - Polaris Scrambler 1000 \u0026 Sportsman 570","description":"\u003cp\u003eRestore dependable fuel delivery with the All Balls Racing fuel pump assembly, a direct-fit replacement module for verified Polaris applications. This fuel pump assembly is designed to help keep your machine running smoothly by replacing a worn or failing fuel system component with a complete service solution.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e - Verified fitment spans Polaris applications from 2014-2022.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete module design\u003c\/strong\u003e - Service the fuel system with a replacement assembly instead of piecing together multiple components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-friendly size\u003c\/strong\u003e - Measures 15.25 in long, 7.0 in wide, and 7.5 in high for planning and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented weight\u003c\/strong\u003e - Weighs 5.0 lbs, supporting accurate shipping and fitment checks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFuel pump assembly \/ complete module\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 47-1002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.0 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15.25L x 7.0W x 7.5H in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Sending Unit:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pressure Rating:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2014-2022 Polaris 450 HO 2x4 MD\u003c\/li\u003e\n\u003cli\u003e2014-2022 Polaris Hawkeye 325 2x4\u003c\/li\u003e\n\u003cli\u003e2014-2022 Polaris Scrambler 1000 MD\u003c\/li\u003e\n\u003cli\u003e2014-2022 Polaris Scrambler 1000 Tractor\u003c\/li\u003e\n\u003cli\u003e2014-2022 Polaris Scrambler 1000 XP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":31058246271023,"sku":"47-1002","price":260.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/3f6c-5c8fe61cc6496_1056b096-c17e-40d1-8345-7c4c389d8e5e.jpg?v=1780118111"},{"product_id":"47-1003","title":"All Balls 47-1003 Fuel Pump - Polaris Scrambler 850 \u0026 Sportsman 550","description":"\u003cp\u003eAll Balls Racing 47-1003 is a complete in-tank fuel pump module engineered for select 2011-2014 Polaris Sportsman 550 and Scrambler 850 ATVs. This assembly restores proper fuel pressure and reliable delivery so your Polaris starts easily, idles smoothly, and pulls hard under load.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete drop-in module\u003c\/strong\u003e - Supplied as a full fuel pump assembly to replace the original module in one step for faster, cleaner installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable fuel delivery\u003c\/strong\u003e - Designed to maintain consistent fuel supply to the injectors for smoother throttle response and reduced stalling or hesitation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit for Polaris platforms\u003c\/strong\u003e - Built specifically for 2011-2014 Polaris Sportsman 550 and Scrambler 850 applications for a confident fit in the stock tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOE-style connections\u003c\/strong\u003e - Electrical plug and mounting points match the factory setup, helping ensure a straightforward swap with no splicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e - Quality components are selected to stand up to off-road vibration, heat, and fuel contamination common in ATV use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll Balls Racing 47-1003 complete in-tank fuel pump module assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule type:\u003c\/strong\u003e Complete in-tank fuel pump module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly type:\u003c\/strong\u003e Fuel pump assembly\/module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes sending unit:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel pressure rating:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow rate:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.09 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15.25 in L x 7.0 in W x 7.6 in H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e In-tank fuel pump module (vehicle center, no left\/right side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 47-1003\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eOEM references from Polaris search:\u003c\/strong\u003e 3022553, 2205142\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement fuel pump module for select 2011-2014 Polaris ATVs. Detailed year, model, and trim coverage includes multiple Polaris Sportsman 550 and Scrambler 850 variants and will be fully listed in the fitment chart on this page.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2014 Polaris Sportsman 550 models (including EPS where listed)\u003c\/li\u003e\n\u003cli\u003e2011-2014 Polaris Scrambler 850 HO \/ EPS models\u003c\/li\u003e\n\u003cli\u003e2011-2014 Polaris Scrambler 850 XP HO EPS and Scrambler 850 XP HO EPS INTL models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplaces OEM part(s) referenced in Polaris documentation search: 3022553 (spark plug), 2205142 (long block kit). These OEM numbers are included per the provided OEM cross-reference search instructions.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":31058276941871,"sku":"47-1003","price":260.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/9429-5cfaac336ff78.jpg?v=1780118117"},{"product_id":"polaris-sportsman-800-fuel-pump-assembly","title":"All Balls 47-1014 Fuel Pump - 2008-2015 Polaris Sportsman 500\/800","description":"\u003cp\u003eRestore the power and reliability of your Polaris Sportsman 800 with the All Balls Racing 47-1014 Fuel Pump Assembly. Designed specifically for Sportsman EFI applications, this complete module replaces your worn or failing OEM pump to bring back strong starts, smooth throttle response, and consistent performance in all riding conditions.\u003c\/p\u003e\n\n\u003cp\u003eAll Balls Racing engineers their fuel pump modules to meet or exceed OEM performance while simplifying installation. Instead of piecing together individual components, this assembly arrives ready to drop in, helping you spend less time in the garage and more time on the trail.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy choose the All Balls 47-1014 fuel pump assembly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement:\u003c\/strong\u003e Built to fit Polaris Sportsman 800 EFI models, with the correct connections and layout for a straightforward swap.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete module design:\u003c\/strong\u003e Includes the internal pump and key components in one unit, eliminating the guesswork of mixing and matching parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable fuel delivery:\u003c\/strong\u003e Designed to maintain proper fuel flow and pressure for easier starting, cleaner idle, and stronger performance under load.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt for powersports use:\u003c\/strong\u003e Developed to handle the vibration, heat, and harsh conditions that ATVs see on trails, job sites, and farms.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuality from a trusted brand:\u003c\/strong\u003e All Balls Racing is well known in the powersports world for durable, performance-driven replacement parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePerformance-focused replacement for worn OEM pumps\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA weak or failing fuel pump can show up as hard starting, hesitation, stalling, or loss of power under acceleration. Swapping to this All Balls 47-1014 assembly is an effective way to address those fuel delivery issues and get your Sportsman 800 back to running the way it should.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis fuel pump assembly is designed as a plug-and-play style replacement for the original module. With basic hand tools and a service manual for your specific Sportsman model, most riders can complete the install in a home garage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIdeal for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacing a non-functioning or intermittent OEM fuel pump\u003c\/li\u003e\n  \u003cli\u003eRestoring reliability on high-mileage Sportsman 800 machines\u003c\/li\u003e\n  \u003cli\u003ePreventative maintenance before a big ride, hunting trip, or work season\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis All Balls Racing fuel pump assembly (MPN: 47-1014) is engineered for select Polaris Sportsman 800 EFI applications. Always verify fitment for your exact year and model using our fitment tools or your service information before ordering.\u003c\/p\u003e\n\n\u003cp\u003eBring your Polaris Sportsman 800 back to life with dependable fuel delivery. Install the All Balls Racing 47-1014 Fuel Pump Assembly and ride with confidence again.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":32620799328303,"sku":"47-1014","price":358.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/d950-5cfaac745d2a2.jpg?v=1780356141"},{"product_id":"all-balls-fuel-pump-rebuild-kit-47-2009","title":"All Balls Fuel Pump Rebuild Kit for 2005-2007 Polaris Sportsman","description":"\u003cp\u003eRestore fuel system performance with the \u003cstrong\u003eAll Balls Racing Fuel Pump Rebuild Kit\u003c\/strong\u003e for select Polaris Sportsman 500, 700, and 800 applications. This kit is designed as a rebuild solution for worn or aging OEM fuel pump components, helping support consistent fuel delivery and dependable operation on compatible vehicles.\u003c\/p\u003e\u003cp\u003ePart number \u003cstrong\u003e47-2009\u003c\/strong\u003e is an All Balls Racing fuel pump kit for Polaris Sportsman fitments, and verified alternate cross-reference \u003cstrong\u003eabr47-2009\u003c\/strong\u003e is also recognized for this application. The product is listed as a fuel pump kit and is intended for select Polaris Sportsman models in the 2005-2007 range, including multiple Sportsman 500, 700 EFI, and 800 EFI configurations.\u003c\/p\u003e\u003cp\u003eThis aftermarket replacement is a practical choice when the original fuel pump assembly is worn, damaged, or no longer performing as expected. It is commonly used to help address fuel delivery issues while maintaining compatibility with the correct machine configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Always confirm year, model, and build date before purchase. Some Polaris Sportsman 800 EFI applications vary by production date, so matching your exact vehicle details is important for proper installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOEM cross-reference information:\u003c\/strong\u003e Null. No verified OEM replacement part numbers were provided in the extracted search results for this product.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":32885126889519,"sku":"47-2009","price":93.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/abab-5cc080a1812b6.jpg?v=1780356732"},{"product_id":"tapered-dac-wheel-bearing","title":"All Balls Tapered DAC Wheel Bearing Kit","description":"\u003cp\u003eThe All Balls Racing 25-1628-HP Tapered DAC Wheel Bearing is a front wheel bearing upgrade kit engineered for 2011–2013 Polaris Sportsman 550 models. This tapered DAC design is built to handle higher radial and axial loads than a worn stock bearing, helping your ATV track straighter and steer more precisely on rough trails.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved front-end stability\u003c\/strong\u003e - Tapered DAC bearing design helps reduce wheel play and wobble for a more planted feel at the handlebars.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced durability on rough terrain\u003c\/strong\u003e - Heavy-duty construction is built to withstand the combined radial and axial loads seen in aggressive ATV use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit upgrade\u003c\/strong\u003e - Designed as a front wheel bearing upgrade kit for 2011–2013 Polaris Sportsman 550, simplifying installation with no major modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother steering feel\u003c\/strong\u003e - A tight, precise bearing fit can reduce vibration and improve steering response for better control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps extend service life\u003c\/strong\u003e - Replacing a worn front wheel bearing with a robust tapered unit can reduce premature wear to associated front hub components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTapered DAC front wheel bearing assembly for one front wheel (exact count of bearings, seals, O-rings, and snap rings not specified in available data)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 25-1628-HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Front wheel bearing upgrade kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.0 in L x 4.75 in W x 2.0 in H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Type:\u003c\/strong\u003e ATV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for the front wheel bearing assembly on the following vehicle:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2013 Polaris Sportsman 550 (front)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":44439210066217,"sku":"25-1628-HP","price":59.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/aedc-601034ac0f9e5.jpg?v=1780118083"},{"product_id":"front-differential-bearing-and-seal-kit","title":"All Balls Front Differential Bearing \u0026 Seal Kit for 2011-2020 Polaris ATV\/UTV","description":"\u003cp\u003eBring your Polaris front end back to life with the \u003cstrong\u003eAll Balls Racing 25-2075 Front Differential Bearing and Seal Kit\u003c\/strong\u003e. Designed as a direct-fit solution for many Polaris ACE, RZR and Ranger applications, this kit gives you everything you need to rebuild a tired, noisy or leaking front differential without the cost of a complete gearcase.\u003c\/p\u003e\n\n\u003cp\u003eEach All Balls Racing differential kit is engineered to meet or exceed OEM standards for fit, function and durability. Precision \u003cstrong\u003eball bearings\u003c\/strong\u003e and \u003cstrong\u003eseals\u003c\/strong\u003e are carefully matched to handle the loads, impacts and heat that come with aggressive trail riding, mud, sand and work duty. Replacing worn bearings and hardened seals helps restore smooth operation, reduces drivetrain play and helps prevent gear oil leaks that can quickly lead to expensive damage.\u003c\/p\u003e\n\n\u003cp\u003eThis front differential bearing and seal kit is a great choice when you are already inside the gearcase to address wear or contamination, or whenever you notice symptoms such as front-end grinding, howling, excessive backlash or fluid at the axle seals. Installing a complete kit ensures all related wear items are serviced at the same time, helping extend the life of your Polaris gearcase.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete front differential refresh kit with matched bearings and seals\u003c\/li\u003e\n  \u003cli\u003eHelps cure front-end noise, vibration and gear oil leaks\u003c\/li\u003e\n  \u003cli\u003eHigh-quality All Balls Racing components for demanding off-road use\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for many Polaris ACE, RZR and Ranger vehicles\u003c\/li\u003e\n  \u003cli\u003eCost-effective alternative to replacing the entire front gearcase assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePosition and application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation position: \u003cstrong\u003eFront differential\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eKit type: \u003cstrong\u003eDifferential bearing and seal kit\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eIntended for various \u003cstrong\u003ePolaris ACE, RZR, Ranger and Scrambler\u003c\/strong\u003e models (see full vehicle fitment list on this page before ordering)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision ball bearings for the front differential assembly\u003c\/li\u003e\n  \u003cli\u003eReplacement oil seals to help keep contaminants out and lubricant in\u003c\/li\u003e\n  \u003cli\u003eAssociated O-rings as required for the covered applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross reference and part numbers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain part number: \u003cstrong\u003eAll Balls Racing 25-2075\u003c\/strong\u003e\n\u003c\/li\u003e\n  \n\u003c\/ul\u003e\n\n\u003cp\u003eUse this kit when rebuilding your Polaris front differential to help ensure long-lasting, reliable performance on the trail, at work or around the property. Always verify compatibility with your exact year, make and model using the fitment information provided before purchase.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":44439339008297,"sku":"25-2075","price":155.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/37ac-572a5b736e401.jpg?v=1780118087"},{"product_id":"cometic-c7855-top-end-gasket-kit-yamaha-yz250-yz250x","title":"Cometic Top End Gasket Kit for 2002+ Yamaha YZ250","description":"\u003cp\u003eThe Cometic C7855 top end gasket kit is a vehicle-specific sealing solution for Yamaha YZ250 and YZ250X 2-stroke engines. Designed as a direct-fit top end gasket kit, it provides the critical gaskets you need to refresh your top end with confidence and restore reliable compression.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete top-end solution\u003c\/strong\u003e - Provides the key gaskets required for a typical top-end service so you can rebuild your YZ250 or YZ250X top end with one convenient kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-ring cylinder head gasket\u003c\/strong\u003e - Features an O-ring cylinder head gasket design to help maintain a consistent seal under high cylinder pressure for dependable performance ride after ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific fitment\u003c\/strong\u003e - Engineered specifically for Yamaha YZ250 (2002 and newer) and YZ250X (2016 and newer) applications to match OEM dimensions and sealing surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeets or exceeds OEM specs\u003c\/strong\u003e - Built to meet or exceed OEM specifications so you can trust the sealing performance in demanding track or trail conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for modern 2-strokes\u003c\/strong\u003e - Designed for today’s 2-stroke riders, supporting hard riding, frequent revving, and regular maintenance intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTop end gasket kit for Yamaha YZ250 \/ YZ250X (includes cylinder head O-ring style gasket and related top-end gaskets as supplied by Cometic for part number C7855)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Cometic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e C7855\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Top end gasket kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Gasket Style:\u003c\/strong\u003e O-ring cylinder head gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.05 in L x 7.0 in W x 0.35 in H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191070006310\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002+ Yamaha YZ250 (top end)\u003c\/li\u003e\n\u003cli\u003e2016+ Yamaha YZ250X (top end)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit is intended for the engine top end only and is tailored to Yamaha 2-stroke dirt bike applications.\u003c\/p\u003e\n\u003cp\u003eReplaces OEM Part(s): OEM gasket numbers are application-specific; this Cometic C7855 kit is designed as an aftermarket top end replacement kit for the listed Yamaha models.\u003c\/p\u003e","brand":"COMETIC","offers":[{"title":"Default Title","offer_id":53212119892265,"sku":"C7855","price":46.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_5630d9cf-1664-4f97-8585-8d2e3f6ed8a8.jpg?v=1780118195"},{"product_id":"cometic-top-end-gasket-kit-90mm-kawasaki-kvf750","title":"Cometic Top End Gasket Kit 90mm for Kawasaki KVF750","description":"\u003cp\u003eRestore sealing performance during a top-end rebuild with the \u003cstrong\u003eCometic C3251-EST top end gasket kit\u003c\/strong\u003e. This 90mm bore gasket set is designed for compatible Kawasaki KVF750 Brute Force and KRF750 Teryx applications and is built to meet or exceed OEM specifications.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete top-end coverage\u003c\/strong\u003e - Includes head gaskets for a more complete rebuild solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-style fit and sealing\u003c\/strong\u003e - Manufactured to meet or exceed OEM specifications for dependable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90mm bore application\u003c\/strong\u003e - Matches the verified 90mm kit specification for compatible vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e - Stainless steel material is listed in supplier data for the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTop end gasket kit\u003c\/li\u003e\n\u003cli\u003eHead gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e C3251-EST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore:\u003c\/strong\u003e 90mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.0 in x 7.0 in x 0.45 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191070012885\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2005-2014 Kawasaki KVF750 Brute Force 4X4i\u003c\/li\u003e\n\u003cli\u003e2013-2014 Kawasaki KVF750 Brute Force 4X4i EPS (IRS)\u003c\/li\u003e\n\u003cli\u003e2017 Kawasaki KVF750 Brute Force\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReplaces OEM Part(s): 415370\u003c\/p\u003e","brand":"COMETIC","offers":[{"title":"Default Title","offer_id":53212119925033,"sku":"C3251-EST","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6592d7ef-a507-448e-a95c-e2eea2ea9c3a.jpg?v=1780118187"},{"product_id":"cometic-c3462-est-top-end-gasket-kit-96mm-can-am-brp","title":"Cometic Top End Gasket Kit 96mm for Can-Am BRP Engines","description":"\u003cp\u003eThe Cometic C3462-EST EST Top End Gasket Kit is a 96mm bore powersports gasket solution engineered for select Can-Am\/BRP engines. Designed for riders and technicians rebuilding the top end, this kit delivers a precise seal that helps restore compression and reliability to your ATV or UTV engine.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-level sealing performance\u003c\/strong\u003e - Engineered to meet or exceed OEM specifications so your Can-Am\/BRP engine maintains proper compression and leak-free operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96mm bore precision\u003c\/strong\u003e - Sized specifically at 96mm to match compatible BRP cylinders, helping ensure correct fitment during top end rebuilds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete top end coverage\u003c\/strong\u003e - Includes the critical top end gaskets needed when servicing the cylinder head and related components, reducing the need to source individual pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for modern powersport engines\u003c\/strong\u003e - Designed around today’s high-output engines that run higher cylinder pressures, clamp loads, and temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable replacement for worn gaskets\u003c\/strong\u003e - Ideal for refreshing older engines or replacing gaskets during routine top end service to help prevent future leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete 96mm top end gasket kit for compatible Can-Am\/BRP engines (C3462-EST)\u003c\/li\u003e\n\u003cli\u003eCylinder head and related top end gaskets as supplied by Cometic for this kit number\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Cometic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e C3462-EST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Top end gasket kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore size:\u003c\/strong\u003e 96mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Can-Am \/ BRP engines (see vehicle-specific fitment information when available)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 6.0 in (L) x 7.0 in (W) x 0.5 in (H)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for select Can-Am \/ BRP engines using a 96mm bore top end configuration. When available, consult a detailed year\/make\/model chart or your service manual to confirm compatibility with your specific ATV or UTV.\u003c\/p\u003e\n\u003cp\u003eReplaces OEM Part(s): OEM part numbers were not explicitly listed in the available documentation. This kit is intended as an OEM-spec replacement top end gasket set for compatible Can-Am\/BRP applications.\u003c\/p\u003e","brand":"COMETIC","offers":[{"title":"Default Title","offer_id":53212119957801,"sku":"C3462-EST","price":189.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_4762aed9-8c19-4476-9ee3-9f9c634163c1.jpg?v=1780118190"},{"product_id":"cometic-c3568-est-top-end-gasket-kit-93-5mm-arctic-cat-1000","title":"Cometic Top End Gasket Kit 93.5mm for 2013-2017 Arctic Cat 1000 XT","description":"\u003cp\u003eRestore compression and stop leaks in your Arctic Cat 1000 with the Cometic C3568-EST 93.5mm top end gasket kit. Designed for 93.5mm bore engines, this complete kit delivers the critical seals you need for a clean, reliable top-end rebuild.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete top-end kit\u003c\/strong\u003e - Includes the correct base gasket, head gasket, cylinder O-rings and other top-end specific O-rings so you have the key seals needed for a proper rebuild.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized 93.5mm bore sealing\u003c\/strong\u003e - Sized specifically for 93.5mm bore Arctic Cat 1000 applications to maintain tight combustion chamber sealing and consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance-oriented thickness\u003c\/strong\u003e - Head gasket features a compressed thickness of approximately 0.027 in to help support strong compression and responsive throttle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable multi-material construction\u003c\/strong\u003e - Cometic uses proven gasket materials, including graphite and fiber styles, to handle heat, pressure and vibration in demanding off-road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit for Arctic Cat 1000 engines\u003c\/strong\u003e - Engineered for the factory top-end layout so components align correctly and install with minimal hassle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCylinder head gasket (93.5mm bore)\u003c\/li\u003e\n\u003cli\u003eBase gasket\u003c\/li\u003e\n\u003cli\u003eCylinder O-rings\u003c\/li\u003e\n\u003cli\u003eAdditional top-end specific O-rings and seals for the top end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Cometic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e C3568-EST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket set type:\u003c\/strong\u003e Top-end set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore size:\u003c\/strong\u003e 93.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed head gasket thickness:\u003c\/strong\u003e 0.027 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Composite multi-material construction (graphite and fiber-style gaskets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 11.0 in L x 12.05 in W x 1.05 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement top end gasket kit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2017 Arctic Cat 1000 XT (top end)\u003c\/li\u003e\n\u003cli\u003e2017 Arctic Cat MudPro 1000 LTD (top end)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COMETIC","offers":[{"title":"Default Title","offer_id":53212120088873,"sku":"C3568-EST","price":154.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_3d7c78b2-7cc2-4f42-944a-83f313f1228f.jpg?v=1780118192"},{"product_id":"all-balls-racing-18-8018-sintered-brake-pad-kit-polaris","title":"All Balls Sintered Brake Pad Kit for Polaris General 1000","description":"\u003cp\u003eThe All Balls Racing 18-8018 Sintered Brake Pad Kit is a high-performance replacement set for Polaris ATVs and UTVs, including popular models like the General 1000 EPS. Built with a durable sintered compound, these pads deliver strong, consistent stopping power and long service life in harsh trail and work conditions.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong, reliable braking\u003c\/strong\u003e - Sintered friction material provides confident stopping power in mud, water, dust, and high-heat environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended pad life\u003c\/strong\u003e - Hard-wearing sintered compound is engineered to last longer than typical organic pads, meaning fewer pad changes over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent performance\u003c\/strong\u003e - Low fade under repeated braking helps maintain lever feel and braking force on long descents or heavy towing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise OEM-style fit\u003c\/strong\u003e - Backing plates are shaped to match Polaris calipers for smooth installation and secure, rattle-free operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for trail and work use\u003c\/strong\u003e - Designed to stand up to demanding off-road riding, utility work, and loaded machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne set of All Balls Racing sintered brake pads (18-8018) for a single Polaris brake caliper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 18-8018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 613310807261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e Sintered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front or rear caliper on applicable Polaris models (one caliper per kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Set of pads for one caliper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.44 lbs (approximate package weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.0 in L x 4.75 in W x 1.0 in H (package)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for Polaris applications listed in the full fitment chart, including but not limited to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2016-2019 Polaris General 1000 EPS (front and rear calipers where listed)\u003c\/li\u003e\n\u003cli\u003e2016-2019 Polaris General 1000 EPS Deluxe (front and rear calipers where listed)\u003c\/li\u003e\n\u003cli\u003eAdditional Polaris ATV and UTV models from 2007-2023 as shown in the complete fitment list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":53212120252713,"sku":"18-8018","price":31.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_dad75711-1674-4ed6-b614-6042a862e104.jpg?v=1780118059"},{"product_id":"all-balls-18-8030-sintered-brake-pad-kit-polaris-big-boss-250","title":"All Balls Sintered Brake Pad Kit for 89-92 Polaris Big Boss","description":"\u003cp\u003eAll Balls Racing 18-8030 is a sintered brake pad kit built to restore strong, consistent braking performance on your Polaris Big Boss 250 4x6. Designed as a direct-fit replacement for the rear left caliper, this pad set combines a rugged sintered compound with precise fitment for reliable stopping power in demanding work and trail conditions.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfident stopping power\u003c\/strong\u003e - Sintered friction compound provides strong, predictable braking performance under load and at higher temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLasting performance in harsh conditions\u003c\/strong\u003e - Sintered pads are well-suited for wet, muddy, and abrasive environments, helping maintain braking effectiveness over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit for easier installation\u003c\/strong\u003e - Pad shape and backing plate are matched to the OEM rear left caliper on Polaris Big Boss 250 4x6 models, simplifying replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable feel and control\u003c\/strong\u003e - Consistent friction characteristics support smooth brake modulation for both work and recreational riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete caliper service\u003c\/strong\u003e - Sold as a pair of pads, giving you everything you need to re-pad the rear left caliper in one service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne pair of sintered brake pads for rear left caliper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number (MPN):\u003c\/strong\u003e 18-8030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Brake pad kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e Sintered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Pair (one caliper)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.27 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (packaged):\u003c\/strong\u003e 5.0 in L x 4.75 in W x 1.0 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1989-1992 Polaris Big Boss 250 4x6 (rear left)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":53212120318249,"sku":"18-8030","price":31.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_deefafe1-cf51-4d8b-ab69-44509cf83f7c.jpg?v=1780118067"},{"product_id":"pivot-works-wheel-bearing-kit-premium-25-1187-p-honda-atc70","title":"Pivot Works Wheel Bearing Kit Premium for 1973-1985 Honda ATC70","description":"\u003cp\u003eThe Pivot Works 25-1187-P Premium Wheel Bearing Kit is engineered to refresh the wheels on your classic Honda ATC70 with smooth, reliable rotation. Built around high-quality bearings sourced from leading manufacturers, this kit is designed as a direct-fit replacement for OEM wheel bearings on 1973-1985 Honda ATC70 models.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestore smooth wheel performance\u003c\/strong\u003e - Replace worn or notchy wheel bearings to bring back consistent, predictable handling on your Honda ATC70.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium bearing quality\u003c\/strong\u003e - Bearings are sourced from respected brands such as NTN, NSK and Koyo for dependable performance and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to meet or exceed OEM specs\u003c\/strong\u003e - Designed to match OEM dimensions and tolerances, helping ensure proper fit and long service life when installed correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for varied riding conditions\u003c\/strong\u003e - Quality materials and precision manufacturing support reliable operation in everyday riding, trail use, and light-duty off-road conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient complete-kit solution\u003c\/strong\u003e - A single part number provides the wheel bearings you need to service your ATC70, simplifying ordering and maintenance planning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePremium wheel bearing kit 25-1187-P for Honda ATC70 (exact bearing and seal count not specified by manufacturer)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pivot Works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number (MPN):\u003c\/strong\u003e 25-1187-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Wheel bearing kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e null (not specified by manufacturer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e null (not specified by manufacturer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.0 in (L) x 4.75 in (W) x 1.0 in (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing source brands:\u003c\/strong\u003e NTN, NSK, Koyo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing regions:\u003c\/strong\u003e USA, Canada, Europe, Japan, Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit contents:\u003c\/strong\u003e Bearings and related components for ATC70 wheel assembly (exact pieces not listed in available documentation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1973-1985 Honda ATC70 (wheel; position and side not specified)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIVOT WORKS","offers":[{"title":"Default Title","offer_id":53212120514857,"sku":"25-1187-P","price":20.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_a7532993-186d-4a59-bb89-37390382b1ed.jpg?v=1780118076"},{"product_id":"pivot-works-pwsak-h42-000-swing-arm-bearing-kit-arctic-cat-250","title":"Pivot Works Swing Arm Bearing Kit for 2006-2009 Arctic Cat 250","description":"\u003cp\u003eThe Pivot Works PWSAK-H42-000 swing arm bearing kit is a complete rear suspension refresh for your Arctic Cat 250 2x4. Designed as a direct-fit replacement, this kit rebuilds the swing arm pivot with hardened 52100 bearing steel components to restore smooth, consistent handling on the trail.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestore precise rear suspension\u003c\/strong\u003e - Replaces worn swing arm bearings and related components to remove play and clunking from the rear of your ATV.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable 52100 bearing steel\u003c\/strong\u003e - Hardened and plated 52100 bearing steel construction is engineered to handle the repeated loads and impacts of off-road riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother, more controlled ride\u003c\/strong\u003e - Fresh bearings help the swing arm move freely, improving traction, comfort, and stability through bumps and ruts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit for Arctic Cat 250 2x4\u003c\/strong\u003e - Application-specific design for 2006-2009 Arctic Cat 250 2x4 models eliminates guesswork during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-in-one kit convenience\u003c\/strong\u003e - Consolidates the swing arm bearing components you need into a single kit so you can complete the job in one service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSwing arm pivot bearings (rear)\u003c\/li\u003e\n\u003cli\u003eAssociated swing arm bearing hardware and components for the rear suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pivot Works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number (MPN):\u003c\/strong\u003e PWSAK-H42-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit type:\u003c\/strong\u003e Swing arm bearing kit (rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hardened and plated 52100 bearing steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 5.0 in L x 4.75 in W x 1.0 in H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rear swing arm pivot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2006 Arctic Cat 250 2x4 (rear swing arm)\u003c\/li\u003e\n\u003cli\u003e2007 Arctic Cat 250 2x4 (rear swing arm)\u003c\/li\u003e\n\u003cli\u003e2008 Arctic Cat 250 2x4 (rear swing arm)\u003c\/li\u003e\n\u003cli\u003e2009 Arctic Cat 250 2x4 (rear swing arm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIVOT WORKS","offers":[{"title":"Default Title","offer_id":53212121006377,"sku":"PWSAK-H42-000","price":40.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_fd88745e-49da-4847-872d-b49137037ffd.jpg?v=1780118207"},{"product_id":"pivot-works-pwirs-00029-irs-bearing-kit-polaris","title":"Pivot Works IRS A-Arm Bearing Kit for Polaris Ranger \u0026 ACE","description":"\u003cp\u003eBring your Polaris suspension back to a tight, precise feel with the \u003cstrong\u003ePivot Works IRS Bearing Kit PWIRS-00029\u003c\/strong\u003e. Built to meet OEM specifications, this kit is engineered as a direct replacement for worn independent rear suspension and A-arm components on select Polaris ATV and UTV models.\u003c\/p\u003e\n\n\u003cp\u003eOver time, factory bearings and bushings can wear out from mud, water, and heavy loads, creating suspension play, uneven tire wear, and poor handling. The PWIRS-00029 kit is designed to address these issues in one convenient package, helping you restore the confident ride quality your machine had when it was new.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM-style fit and function\u003c\/strong\u003e – Components are manufactured to OEM specifications for a precise, bolt-on installation with no guessing or modification required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComprehensive kit\u003c\/strong\u003e – Includes the critical \u003cstrong\u003ebearings, pins, collars, and seals\u003c\/strong\u003e needed to service the specified IRS\/A-arm locations, reducing downtime and parts-hunting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved ride and control\u003c\/strong\u003e – Replacing worn suspension bearings helps tighten up the rear end, improving stability, steering precision, and overall comfort on rough terrain.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e – Quality materials and sealing help protect against contamination from mud, sand, and water for long service life when properly maintained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eTypical Use Cases\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRefreshing a high-mileage Polaris Ranger or ATV rear suspension.\u003c\/li\u003e\n  \u003cli\u003eEliminating excessive play, clunking, or wandering caused by worn IRS bearings.\u003c\/li\u003e\n  \u003cli\u003ePrepping a machine for heavy work, trail riding, or hunting where reliability is critical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Pivot Works IRS Bearing Kit is designed for select Polaris ATV\/UTV applications and covers multiple Ranger and off-road models and years. Always confirm exact fitment for your year, make, and model using your vehicle details before ordering or installing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part Number (MPN): \u003cstrong\u003ePWIRS-00029\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eAlternate \/ Supplier Part Number: \u003cstrong\u003epivPWIRS-00029\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eOEM part number cross-references: \u003cstrong\u003enull\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional installation or a well-equipped DIY setup is recommended.\u003c\/li\u003e\n  \u003cli\u003eInspect related suspension components (arms, mounts, and hardware) and replace any excessively worn or damaged parts during installation.\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque specs and alignment procedures for best performance and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUpgrade or restore your Polaris with a purpose-built \u003cstrong\u003ePivot Works IRS Bearing Kit PWIRS-00029\u003c\/strong\u003e and enjoy smoother suspension action, better control, and renewed confidence on every ride.\u003c\/p\u003e","brand":"PIVOT WORKS","offers":[{"title":"Default Title","offer_id":53212121039145,"sku":"PWIRS-00029","price":64.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e6588ce6-ab04-4820-be59-356c31f75fdd.jpg?v=1780118204"},{"product_id":"all-balls-racing-42-1030-ball-joint-kit-polaris","title":"All Balls Racing 42-1030 Ball Joint","description":"\u003cp\u003eThe \u003cstrong\u003eAll Balls Racing 42-1030 Ball Joint\u003c\/strong\u003e is an OEM-quality direct-fit replacement ball joint for ATV and UTV suspension. Ball joints take a beating in off-road use — replacing them with All Balls' sealed, hardened components restores precise steering feel and eliminates the slop and clunks that come with worn joints.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-quality construction\u003c\/strong\u003e — Hardened ball-and-socket designed to handle the loads of off-road riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed against dirt and water\u003c\/strong\u003e — Internal grease retention keeps the joint smooth far longer than worn OEM units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e — Drops into the stock A-arm without machining or modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores precise steering\u003c\/strong\u003e — Eliminates the play, clunks, and wandering that come with worn ball joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Balls Racing — the powersports authority\u003c\/strong\u003e on bearings, joints, and seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne (1) All Balls Racing 42-1030 ball joint\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 42-1030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Ball joint (direct-fit replacement)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAll Balls catalog application. Verify the specific vehicle and upper\/lower position for part number \u003cstrong\u003e42-1030\u003c\/strong\u003e using the All Balls fitment guide before ordering.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":53212121235753,"sku":"42-1030","price":31.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0d3c955c-8f7b-4205-8d24-63a19870d423.jpg?v=1780357573"},{"product_id":"all-balls-racing-ball-joint-42-1037-polaris","title":"All Balls Racing 42-1037 Ball Joint","description":"\u003cp\u003eThe \u003cstrong\u003eAll Balls Racing 42-1037 Ball Joint\u003c\/strong\u003e is an OEM-quality direct-fit replacement ball joint for ATV and UTV suspension. Ball joints take a beating in off-road use — replacing them with All Balls' sealed, hardened components restores precise steering feel and eliminates the slop and clunks that come with worn joints.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-quality construction\u003c\/strong\u003e — Hardened ball-and-socket designed to handle the loads of off-road riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed against dirt and water\u003c\/strong\u003e — Internal grease retention keeps the joint smooth far longer than worn OEM units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e — Drops into the stock A-arm without machining or modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores precise steering\u003c\/strong\u003e — Eliminates the play, clunks, and wandering that come with worn ball joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Balls Racing — the powersports authority\u003c\/strong\u003e on bearings, joints, and seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne (1) All Balls Racing 42-1037 ball joint\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 42-1037\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Ball joint (direct-fit replacement)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAll Balls catalog application. Verify the specific vehicle and upper\/lower position for part number \u003cstrong\u003e42-1037\u003c\/strong\u003e using the All Balls fitment guide before ordering.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":53212121268521,"sku":"42-1037","price":49.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_b8b5d4f2-9698-4228-be3f-467cc1a84f45.jpg?v=1780357203"},{"product_id":"all-balls-ez-trail-xl-replacement-boot-kit-19-5039","title":"All Balls EZ Trail XL Replacement CV Boot Kit","description":"\u003cp\u003eThe \u003cstrong\u003eAll Balls Racing 19-5039 EZ Trail XL Replacement CV Boot Kit\u003c\/strong\u003e is a trail-side replacement boot for damaged CV joints on ATVs and UTVs. The EZ Trail system lets you replace a torn boot without removing the axle — install it right on the trail when you tear a boot in the rocks.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrail-installable\u003c\/strong\u003e — Replace a torn CV boot without pulling the axle, hub, or knuckle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXL size\u003c\/strong\u003e — Fits oversized CV joints common on full-size UTVs and ATVs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretchable design\u003c\/strong\u003e — Slips over the CV joint and clamps in place; no special tools needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade by All Balls Racing\u003c\/strong\u003e — The industry-standard brand for off-road drivetrain repair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores grease seal\u003c\/strong\u003e — Keeps dirt, water, and rock debris out of your CV joint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eAll Balls 19-5039 EZ Trail XL replacement CV boot, clamps, and trailside-grade grease (where applicable)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 19-5039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e EZ Trail XL replacement CV boot kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal-fit XL CV boot replacement designed to stretch over a wide range of ATV and UTV CV joints. Measure your CV joint outer diameter against the EZ Trail XL spec sheet before ordering.\u003c\/p\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":53212121563433,"sku":"19-5039","price":23.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_56d2cacf-83ae-4670-8224-c4bd2b7de475.jpg?v=1780357658"},{"product_id":"kfi-atv-flex-blade-50-2017-cfmoto-cforce-400","title":"KFI ATV Flex Blade 50 for 2017 CFMOTO CFORCE 400","description":"\u003cp\u003eThe KFI ATV Flex Blade 50\" is a lightweight snow plow blade designed for ATV owners who need reliable winter clearing with less front-end weight. Its 50-inch flexible black poly face and Grade 50 steel rib and frame construction help it stand up to regular use while keeping operation manageable.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight handling\u003c\/strong\u003e - Fully assembled weight is 25 lbs, which helps reduce load on the ATV during plowing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable build\u003c\/strong\u003e - Features 3\/16 in. and 10 gauge Grade 50 steel rib and frame construction for added strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible blade face\u003c\/strong\u003e - The 50 in. black poly vacuum formed face is built to flex while moving snow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified vehicle application\u003c\/strong\u003e - Manufacturer fitment lists 2017 CFMOTO CFORCE 400.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKFI ATV Flex Blade 50\" (105950)\u003c\/li\u003e\n\u003cli\u003eBlack poly blade face with steel rib and frame construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e KFI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 105950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative Part Numbers:\u003c\/strong\u003e 10-5950, kfi105950, 812227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 748252657695\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e 50 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 lbs assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black poly vacuum formed face with 3\/16 in. and 10 gauge Grade 50 steel rib and frame construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2017 CFMOTO CFORCE 400 (front)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eReplaces OEM Part(s): 574668\u003c\/p\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53212121628969,"sku":"105950","price":241.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_2818e532-80c9-48c1-b6fe-fd335d93b4dd.jpg?v=1780118053"},{"product_id":"kfi-102200-winch-mount-honda-trx420-rancher","title":"KFI Winch Mount VRX\/AXON for 2015-2022 Honda TRX420 Rancher","description":"\u003cp\u003eEquip your Honda Rancher with a dedicated winch mounting solution engineered to handle serious work and trail duty. The \u003cstrong\u003eKFI 102200 Winch Mount HON VRX\/AXON\u003c\/strong\u003e is designed around popular VRX and AXON winches to deliver a secure, factory-like installation on select TRX420 models.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from \u003cstrong\u003e3\/16\" Grade 50 steel\u003c\/strong\u003e, this mount provides the strength needed to manage demanding pulls, recoveries, and utility jobs without flex or twist. A tough \u003cstrong\u003eblack powder coat finish\u003c\/strong\u003e adds corrosion resistance and a clean, low-profile look that blends with your OEM front end.\u003c\/p\u003e\n\n\u003cp\u003eThis KFI mount is application-specific for select \u003cstrong\u003eHonda TRX420 Rancher\u003c\/strong\u003e models, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2022 TRX420 Rancher FE ES 4x4\u003c\/li\u003e\n\u003cli\u003e2015-2016, 2021-2022 TRX420 Rancher TE ES\u003c\/li\u003e\n\u003cli\u003e2015-2022 TRX420 Rancher TM\u003c\/li\u003e\n\u003cli\u003e2015-2022 TRX420FA Rancher AT DCT IRS\u003c\/li\u003e\n\u003cli\u003e2015-2022 TRX420FM Rancher 4x4\u003c\/li\u003e\n\u003cli\u003e2020-2021 TRX420FPM Rancher EPS 4x4\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDesigned as a \u003cstrong\u003ebolt-on\u003c\/strong\u003e solution, the bracket uses existing mounting points on your ATV frame for a clean, solid fit and proper winch positioning. KFI includes \u003cstrong\u003ecomplete installation instructions\u003c\/strong\u003e to guide you through the process and help reduce install time for DIY riders and shops alike.\u003c\/p\u003e\n\n\u003cp\u003eOnce installed, this mount provides a rigid base for your VRX or AXON winch, helping maintain alignment under load and improving overall reliability when you are hauling, plowing, or recovering stuck machines. Whether you use your Rancher for work around the property or exploring tight, technical trails, this mount is built to keep your winch ready when you need it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with VRX and AXON winches\u003c\/li\u003e\n\u003cli\u003e3\/16\" Grade 50 steel construction\u003c\/li\u003e\n\u003cli\u003eBlack powder coat finish for durability\u003c\/li\u003e\n\u003cli\u003eModel-specific fitment for select Honda TRX420 Rancher ATVs\u003c\/li\u003e\n\u003cli\u003eComplete installation instructions included\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eConfirm your exact year and model before ordering to ensure proper fitment on your Honda Rancher TRX420.\u003c\/p\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53212122022185,"sku":"102200","price":50.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_137d03e5-1292-49ff-89f9-c56529cb68bc.png?v=1780118045"},{"product_id":"uni-nu-4068st-multi-stage-air-filter-honda-atc-trx","title":"UNI Multi-Stage Air Filter for 1982-86 Honda ATC\/TRX","description":"\u003cp\u003eThe \u003cstrong\u003eUNI NU-4068ST Multi-Stage Competition Air Filter\u003c\/strong\u003e is built for Honda riders who want better power, reliable protection, and a direct-fit upgrade over the stock filter. Designed specifically to fit in the \u003cstrong\u003efactory Honda airbox\u003c\/strong\u003e, this performance foam filter drops in like OEM while delivering competition-level airflow and filtration.\u003c\/p\u003e\n\n\u003cp\u003eFeaturing UNI's proven \u003cstrong\u003etwo-stage foam construction\u003c\/strong\u003e, the NU-4068ST uses multiple layers of open-cell polyurethane foam to capture dust and debris before it reaches your engine, helping extend engine life under harsh off-road conditions. The outer layer traps larger particles, while the inner layer targets fine contaminants, so you get \u003cstrong\u003eexcellent dirt-stopping capability\u003c\/strong\u003e without choking off airflow. This design makes it one of the best-selling replacement air filters for competition motorcycles and ATVs.\u003c\/p\u003e\n\n\u003cp\u003eUnlike disposable paper filters, this UNI foam air filter is \u003cstrong\u003ewashable and reusable\u003c\/strong\u003e when properly cleaned and oiled, making it a smart long-term upgrade. When treated with UNI's specially developed foam filter oil, the open-cell foam helps maximize airflow while maintaining a strong oil barrier against dirt and dust. Riders benefit from improved throttle response and consistent performance across demanding riding conditions.\u003c\/p\u003e\n\n\u003cp\u003eThis NU-4068ST filter is engineered as an \u003cstrong\u003eOEM-style replacement\u003c\/strong\u003e for specific Honda ATC applications, including models such as the ATC110, ATC125M, ATC185S, and ATC200, among others within the listed fitment range. It installs easily in the stock airbox with no modifications required, making it ideal for maintenance, upgrades, or performance builds.\u003c\/p\u003e\n\n\u003cp\u003eIf you ride your Honda ATV in sand, dust, or muddy trails, upgrading to this \u003cstrong\u003eUNI multi-stage competition air filter\u003c\/strong\u003e provides the balance of airflow and protection you need. Pair it with proper filter oil and regular maintenance for maximum longevity and consistent performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-stage, two-layer foam design for high airflow and superior filtration.\u003c\/li\u003e\n\u003cli\u003eFits the stock Honda airbox exactly like the original OEM filter for simple installation.\u003c\/li\u003e\n\u003cli\u003eReusable design when cleaned and re-oiled, offering long-term value.\u003c\/li\u003e\n\u003cli\u003eEngineered for competition-level performance on Honda ATC models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCheck the fitment list on this page to confirm compatibility with your specific Honda model before ordering.\u003c\/p\u003e","brand":"UNI","offers":[{"title":"Default Title","offer_id":53212122054953,"sku":"NU-4068ST","price":31.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e5223046-0933-4bf0-adf2-67dbf0874efe.jpg?v=1780356050"},{"product_id":"pro-filter-afr-1003-03-air-filter-honda-crf250r-crf450r","title":"Pro Filter AFR-1003-03 Air Filter for 2017-2019 Honda CRF250R \/ CRF450R","description":"\u003cp\u003eThe \u003cstrong\u003ePro Filter AFR-1003-03\u003c\/strong\u003e is a ready-to-use, pre-oiled dual-stage foam air filter built for the 2017–2019 Honda CRF250R and CRF450R race bikes. It comes pre-oiled in the box — pull it out, drop it in, and ride.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-oiled out of the box\u003c\/strong\u003e — No messing with filter oil before your next ride or race.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-stage foam construction\u003c\/strong\u003e — Captures fine dust while still flowing enough air to protect peak engine performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit for Honda CRF250R \/ CRF450R\u003c\/strong\u003e — Designed around the airbox of the 17-19 CRF generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable\u003c\/strong\u003e — Clean with Pro Filter cleaner, re-oil, and reuse for many race weekends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffordable race-day spare\u003c\/strong\u003e — Cheap enough to keep multiple pre-oiled spares in your gear bag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne (1) Pro Filter AFR-1003-03 ready-to-use, pre-oiled air filter\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pro Filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e AFR-1003-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Ready-to-use, pre-oiled dual-stage foam air filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit for 2018-2019 Honda CRF250R and 2017-2019 Honda CRF450R. Verify your model year and air box against the Pro Filter catalog before ordering.\u003c\/p\u003e","brand":"PRO FILTER","offers":[{"title":"Default Title","offer_id":53212122317097,"sku":"AFR-1003-03","price":13.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_80938534-6d7c-47de-b0cc-fe6e6525c487.jpg?v=1780356287"},{"product_id":"boss-audio-xp4-48in-rgb-led-whip","title":"BOSS Audio 48\" RGB LED Whip with App Control (IP67)","description":"\u003cp\u003eLight up every ride with the BOSS Audio XP4 48-inch RGB LED chasing whip. This 4-foot, app-controlled LED whip antenna delivers 360-degree illumination to help your ATV, UTV, or off-road vehicle stand out in low-light conditions while adding serious style to your build.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved visibility on the trail\u003c\/strong\u003e - 48 inches of 360-degree RGB LEDs make your machine easier to spot from all directions during night rides and dusty conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable RGB chasing effects\u003c\/strong\u003e - Use the compatible control app on your smartphone to choose colors, patterns, and effects so your whip matches your vehicle and riding style.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for harsh off-road use\u003c\/strong\u003e - IP67 weatherproof rating helps protect the whip from water, mud, and dust so you can ride with confidence in changing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttention-grabbing style upgrade\u003c\/strong\u003e - Full-length LED wrap provides bright, dynamic lighting that turns your whip into a standout visual centerpiece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to integrate with common mounts\u003c\/strong\u003e - Designed as a universal off-road whip antenna, it works with typical ATV\/UTV whip mounting locations for a clean install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBOSS Audio XP4 48-inch RGB LED chasing whip antenna\u003c\/li\u003e\n\u003cli\u003eControl hardware and wiring harness (per manufacturer kit contents)\u003c\/li\u003e\n\u003cli\u003eMounting base and related hardware for attaching the whip to your vehicle's whip mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BOSS Audio\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e XP4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e 48-inch RGB LED chasing whip antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 48 in whip (approx. 4 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination:\u003c\/strong\u003e 360-degree RGB chasing LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e App-controlled via compatible smartphone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.0 lbs (shipping weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 49.0 in L x 2.17 in W x 2.17 in H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e XP4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 791489129787\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit lighting upgrade for off-road vehicles equipped with a whip mount, including many ATVs, UTVs, and side-by-sides. This LED whip is a universal accessory and is not limited to specific years or models. Verify mounting location and electrical connection on your vehicle before installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal ATV\/UTV and off-road vehicle applications (whip mount required)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOSS AUDIO","offers":[{"title":"Default Title","offer_id":53218121056553,"sku":"XP4","price":176.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f6c3c371-e0c0-4a97-9bb4-7c8b07747c66.jpg?v=1780117731"},{"product_id":"dayco-xtx2264-utv-cvt-belt","title":"Dayco XTX Drive Belt for 2016-2022 Polaris RZR 900 \/ ACE 900","description":"\u003cp\u003eThe Dayco XTX2264 XTX\/CTX CVT drive belt is engineered for high-performance ATV and UTV applications that demand reliable power transfer and extreme torque capability. Designed as a replacement for Polaris 3211172 and Carlisle UA441, this XTX UTV belt delivers consistent grip, cooler running, and long service life.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme torque handling\u003c\/strong\u003e - Aramid-reinforced construction is built to manage high torque loads from powerful ATV and UTV engines without excessive stretch or glazing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother power delivery\u003c\/strong\u003e - Deep top cogs and rounded bottom cogs increase belt flexibility, helping your CVT run cooler and improving throttle response under acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced engine braking\u003c\/strong\u003e - EBS-compatible design provides more responsive deceleration and better control when descending hills or navigating technical terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide contact patch\u003c\/strong\u003e - 1.268 inch top width and 42.828 inch outside circumference provide a stable, positive grip on the sheaves for consistent power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for extreme conditions\u003c\/strong\u003e - High temperature rubber compound with aramid fiber reinforcement operates reliably from -37.2°C to 112.7°C for dependable performance in hot or cold environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Dayco XTX2264 XTX\/CTX CVT drive belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt type:\u003c\/strong\u003e CVT drive belt (Dayco XTX\/CTX extreme torque series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High temperature rubber (polychloroprene) with aramid fiber reinforcement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop width:\u003c\/strong\u003e 1.268 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside circumference:\u003c\/strong\u003e 42.828 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.655 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCog design:\u003c\/strong\u003e Deep top cogs, rounded bottom cogs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 26 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature range:\u003c\/strong\u003e -37.2°C to 112.7°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine braking compatible:\u003c\/strong\u003e Yes (EBS belt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforcement:\u003c\/strong\u003e Aramid fiber cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN\/UPC:\u003c\/strong\u003e 036687875990\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate weight:\u003c\/strong\u003e 1.51 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for powersports CVT applications using the OEM part numbers below. Always confirm belt dimensions and OEM number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATV \/ UTV models that use Polaris 3211172 drive belt (various applications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplaces OEM Part(s): 3211172\u003c\/p\u003e\n\u003cp\u003eAlso cross-references: Carlisle UA441\u003c\/p\u003e","brand":"DAYCO","offers":[{"title":"Default Title","offer_id":53219089645865,"sku":"XTX2264","price":179.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_c7c749ac-a64b-48fc-813c-f081a6a81359.jpg?v=1780356374"},{"product_id":"gates-96g2648-g-force-cvt-belt-bennche-cowboy-250","title":"Gates G-Force CVT Drive Belt for 09-13 Polaris RZR 800 S","description":"\u003cp\u003eUpgrade your ATV or UTV drivetrain with the \u003cstrong\u003eGates G-Force 96G2648 CVT drive belt\u003c\/strong\u003e, engineered specifically for modern powersports transmissions. Built on Gates' trusted G-Force technology, this belt is designed to deliver consistent power, reliable engagement, and long service life in real off-road conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe 96G2648 is a \u003cstrong\u003epower sport CVT belt\u003c\/strong\u003e with an RVS-R cross-section, a top width of approximately 0.964 inches, and an outside circumference of about 27.153 inches. Its \u003cstrong\u003enotched construction\u003c\/strong\u003e is designed to help manage heat and maintain flexibility under load, supporting smooth shifting and responsive acceleration in your continuously variable transmission.\u003c\/p\u003e\n\n\u003cp\u003eAs an ATV\/UTV drive belt, the Gates G-Force series is developed specifically for powersports use. Advanced belt materials and cord construction are engineered to handle the variable loads, frequent speed changes, and demanding terrain typical of off-road riding. The result is a belt designed to help reduce slip, improve throttle response, and provide predictable performance from low-speed crawling to higher-speed trail runs.\u003c\/p\u003e\n\n\u003cp\u003eThis part is listed as a fit for select applications, including the \u003cstrong\u003e2016 Bennche Cowboy 250 (229cc, drive)\u003c\/strong\u003e, and is intended as an OEM-style drop-in replacement when ordered by the correct manufacturer part number. Always verify fitment for your exact year, make, and model before installation.\u003c\/p\u003e\n\n\u003cp\u003eIf your original CVT belt is worn, slipping, or showing cracks and glazing, replacing it with a Gates G-Force 96G2648 can help restore proper clutch operation and drivetrain efficiency. Proper belt maintenance and timely replacement are essential for maximizing vehicle performance and protecting other transmission components.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eG-Force CVT design tailored for ATV\/UTV and other powersports vehicles\u003c\/li\u003e\n\u003cli\u003eNotched construction to promote heat control and flexibility under load\u003c\/li\u003e\n\u003cli\u003ePower sport-specific profile for smooth engagement and strong acceleration\u003c\/li\u003e\n\u003cli\u003eEngineered as an OEM-style replacement when ordered by the correct MPN\u003c\/li\u003e\n\u003cli\u003eSupports confident off-road use in a range of riding conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoose the \u003cstrong\u003eGates 96G2648 G-Force ATV\/UTV drive belt\u003c\/strong\u003e when it is confirmed to fit your vehicle, and keep your CVT system ready for the next ride.\u003c\/p\u003e","brand":"GATES","offers":[{"title":"Default Title","offer_id":53219090039081,"sku":"96G2648","price":123.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0c1a6c3c-5ba5-4543-b04e-5acc5b286295.jpg?v=1780356600"},{"product_id":"gates-g-force-redline-30r3750-cvt-drive-belt","title":"Gates G-Force RedLine CVT Drive Belt for 06-21 Can-Am Outlander","description":"\u003cp\u003ePush your machine harder with the \u003cstrong\u003eGates G-Force Redline 30R3750 CVT drive belt\u003c\/strong\u003e, a specialty high-performance belt engineered for modern ATV, UTV and snowmobile applications. Designed for riders who live in the dunes, desert, mud or mountains, this belt is built to handle aggressive throttle, high loads and sustained heat without fading in performance.\u003c\/p\u003e\n\n\u003cp\u003eThe 30R3750 is part of Gates' \u003cstrong\u003eG-Force Redline\u003c\/strong\u003e series, the next generation of Continuously Variable Transmission (CVT) belts. Its advanced construction and proprietary materials are optimized for extreme off-road use, helping reduce speed ratio losses and improve overall drivetrain efficiency in demanding conditions.\u003c\/p\u003e\n\n\u003cp\u003eWith a \u003cstrong\u003etop width of approximately 1.313 inches\u003c\/strong\u003e and an \u003cstrong\u003eoutside circumference of about 38.625 inches\u003c\/strong\u003e, this belt is precisely engineered for a tight, consistent fit in compatible clutches. The robust profile and double-notched design (where applicable) promote better flexibility and heat dissipation, supporting smoother engagement and more consistent power delivery throughout the RPM range.\u003c\/p\u003e\n\n\u003cp\u003eRiders upgrading to the G-Force Redline 30R3750 can experience:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved acceleration and throttle response\u003c\/strong\u003e thanks to reduced energy loss and an efficient CVT profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh load and torque capacity\u003c\/strong\u003e suited for larger-displacement and performance-built engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent heat resistance and recovery\u003c\/strong\u003e for tough trail rides, long climbs and repeated wide-open-throttle runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e that helps extend belt life under severe-use conditions when properly installed and broken in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis belt is an ideal upgrade or replacement for riders who want more consistency and durability than typical standard CVT belts. It is designed to work in harsh environments where mud, dust, sand and heat constantly test your drivetrain.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e This Gates G-Force Redline 30R3750 drive belt fits \u003cstrong\u003e23 vehicles\u003c\/strong\u003e in total. Always confirm compatibility with your exact year, make and model before ordering, and reference any OEM part numbers or interchange data provided on this page.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; break-in:\u003c\/strong\u003e For best results and maximum belt life, thoroughly clean the clutches and sheaves before installation, remove old belt residue, and follow a proper heat-cycle break-in procedure. Gradual break-in under light to moderate load helps the belt seat correctly and perform at its full potential.\u003c\/p\u003e\n\n\u003cp\u003eChoose the \u003cstrong\u003eGates G-Force Redline 30R3750 CVT drive belt\u003c\/strong\u003e when you want reliable power transfer, strong acceleration and dependable performance every time you hit the trail, track or backcountry.\u003c\/p\u003e","brand":"GATES","offers":[{"title":"Default Title","offer_id":53219090399529,"sku":"30R3750","price":162.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_7078feb7-fe4d-4535-ab8e-7c5e6c20a67e.jpg?v=1780356746"},{"product_id":"kfi-utv-rf-wide-roller-fairlead-6in-bolt-pattern","title":"KFI Wide Roller Fairlead 6\" 2-Hole Bolt Pattern for UTV Winch","description":"\u003cp\u003eThe KFI UTV-RF Wide Roller Fairlead is a universal ATV\/UTV winch accessory designed to keep your steel cable running smooth and true. With a wide 6.00 inch bolt pattern, Delrin bushings, and zinc plated rollers, this roller fairlead helps protect your winch cable and mounting system on every pull.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother cable operation\u003c\/strong\u003e - Four rolling surfaces guide the winch cable, reducing drag and helping your winch pull more consistently under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced cable wear\u003c\/strong\u003e - Zinc plated rollers and low-friction Delrin bushings work together to minimize abrasion on your steel cable, extending its service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable trail-ready construction\u003c\/strong\u003e - A robust steel body with a powder coated metallic silver finish stands up to mud, moisture, and regular off-road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 6.00\" bolt pattern\u003c\/strong\u003e - Designed around the common wide UTV\/ATV winch fairlead bolt pattern, making it a direct replacement on many bumpers and mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy installation\u003c\/strong\u003e - Supplied hardware lets you bolt the fairlead to compatible winch mounts quickly so you can get back to work or play.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV-RF wide roller fairlead assembly\u003c\/li\u003e\n\u003cli\u003eMounting hardware (bolts\/washers as supplied by KFI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e KFI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e UTV-RF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e UTV\/ATV winch roller fairlead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern width:\u003c\/strong\u003e 6.00 inch wide UTV\/ATV standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel body with zinc plated rollers and Delrin bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder coated metallic silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.9 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 7.37 x 3.62 x 2.5 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope compatibility:\u003c\/strong\u003e Designed for use with steel winch cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch capacity compatibility:\u003c\/strong\u003e Depends on winch and mount (check your winch manufacturer’s rating)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit upgrade for many ATV and UTV winch bumpers and mounts that use a wide 6.00 inch bolt pattern roller fairlead. Always verify bolt pattern and space available on your specific winch mount before ordering.\u003c\/p\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53219250766121,"sku":"UTV-RF","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f1c09f33-7eeb-4e4a-8c1f-de3b2ffcf36c.png?v=1780204333"},{"product_id":"kfi-utv-plow-mount-106640-ssr-bighorn","title":"KFI UTV Front Plow Mount 106640 for 2015-2026 Axis \u0026 Coleman","description":"\u003cp\u003eGet your UTV ready for serious winter work with the \u003cstrong\u003eKFI UTV Plow Mount 106640\u003c\/strong\u003e. Engineered specifically for select SSR, Bighorn and compatible UTV models, this mount gives your KFI plow system a rock-solid connection to the frame, so you can move heavy snow with confidence.\u003c\/p\u003e\n\n\u003cp\u003eThis UTV plow mount is designed as a \u003cstrong\u003evehicle-specific, front-mount system\u003c\/strong\u003e, eliminating guesswork and unnecessary fabrication. The bracket positions the plow push tubes correctly on your machine, helping maintain proper blade angle and ground clearance while you work. Because it is tailored to your UTV, the installation is straightforward and clean when paired with the correct KFI plow components.\u003c\/p\u003e\n\n\u003cp\u003eBuilt for demanding winter conditions, the KFI 106640 mount uses \u003cstrong\u003edurable, high-strength steel\u003c\/strong\u003e and is finished in a \u003cstrong\u003etough powder coat\u003c\/strong\u003e for excellent resistance to corrosion, road salt and moisture. This robust construction helps the mount stand up to repeated plowing, frozen drifts and uneven terrain season after season.\u003c\/p\u003e\n\n\u003cp\u003eWhen installed with the appropriate KFI plow blade and push tube system, this mount allows for quick hookup and removal of your plow, so you can switch between work and recreation without hassle. The design integrates neatly with the underside\/front of the chassis for a clean look that stays out of the way when the plow is not in use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUTV-specific design for select SSR, Bighorn and compatible models for an accurate, secure fit\u003c\/li\u003e\n  \u003cli\u003eFront-mount configuration for solid plow control and pushing performance\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel construction to handle demanding snow and utility work\u003c\/li\u003e\n  \u003cli\u003ePowder-coated finish to help protect against rust, salt and winter abuse\u003c\/li\u003e\n  \u003cli\u003eEngineered to work with KFI UTV plow tube and blade systems (sold separately)\u003c\/li\u003e\n  \u003cli\u003eIncludes necessary mounting hardware for installation on compatible vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are outfitting your UTV for winter, the KFI UTV Plow Mount 106640 is an essential foundation for your plow setup. Confirm that your SSR, Bighorn or other UTV is listed in the fitment guide, then pair this mount with a matching KFI plow blade and push tubes for a complete, reliable snow removal system.\u003c\/p\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53219251061033,"sku":"106640","price":99.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_cb423a62-680d-46ee-88a0-86da9507e345.png?v=1780204364"},{"product_id":"gates-g-force-redline-cvt-belt-47r4738-kawasaki-teryx","title":"Gates G-Force RedLine CVT Belt for 20-24 Kawasaki Teryx KRX 1000","description":"\u003cp\u003ePush your ATV or UTV harder with the \u003cstrong\u003eGates G-Force Redline 47R4738 drive belt\u003c\/strong\u003e, purpose-built for next-generation, high-horsepower off-road machines. Designed specifically for demanding CVT applications, this belt delivers the strength, heat resistance, and efficiency serious riders need.\u003c\/p\u003e\n\u003cp\u003eGates G-Force Redline belts use a proprietary \u003cstrong\u003eEE (ethylene elastomer) compound\u003c\/strong\u003e that dramatically increases transverse and axial stiffness for more consistent power transfer under heavy load. This advanced material helps the belt run at \u003cstrong\u003ehigher continuous torques and loads\u003c\/strong\u003e while resisting heat fade, glazing, cracking, and chunking even after prolonged high-temperature operation.\u003c\/p\u003e\n\u003cp\u003eThe Redline series is extensively lab and field tested to handle aggressive acceleration, rapid backshifts, and high variable torque loads common in dunes, mountains, mud, and desert riding. Riders can experience \u003cstrong\u003equicker acceleration, higher top speeds, and reduced speed loss\u003c\/strong\u003e in extreme off-road environments thanks to the belt’s innovative design and optimized profile.\u003c\/p\u003e\n\u003cp\u003eA high-tensile aramid cord layer and specially formulated adhesion gum maximize shock-load resistance and belt life, helping reduce downtime and replacement intervals. A durable fabric cog jacket on the rounded cogs promotes smooth shifting and increases abrasion resistance for consistent performance over time.\u003c\/p\u003e\n\u003cp\u003eG-Force Redline belts are also made without harmful chlorinated compounds, reducing environmental impact without sacrificing performance. If you are upgrading your ATV or UTV for harder riding, bigger power, or tougher terrain, the \u003cstrong\u003eGates G-Force Redline 47R4738\u003c\/strong\u003e is a strong choice for a reliable, performance-focused replacement CVT belt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for turbo-charged and high-horsepower off-road CVT applications\u003c\/li\u003e\n\u003cli\u003eEnhanced heat resistance and recovery in severe duty cycles\u003c\/li\u003e\n\u003cli\u003eOptimized EE compound improves stiffness, load capacity, and torque handling\u003c\/li\u003e\n\u003cli\u003eSmoother shifting with reduced speed loss for better acceleration and top-end performance\u003c\/li\u003e\n\u003cli\u003eImproved crack, wear, and abrasion resistance for longer belt life\u003c\/li\u003e\n\u003cli\u003eManufactured without chlorinated compounds for reduced environmental risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment for your specific ATV or UTV before ordering to ensure proper installation and performance.\u003c\/p\u003e","brand":"GATES","offers":[{"title":"Default Title","offer_id":53219252371753,"sku":"47R4738","price":192.07,"currency_code":"USD","in_stock":true}]},{"product_id":"red-line-90220-utv-atv-10w50-powerpack","title":"Red Line UTV\/ATV 10W50 PowerPack Oil Change Kit for Polaris","description":"\u003cp\u003eThe Red Line 90220 UTV\/ATV 10W50 PowerPack is a complete full-synthetic oil change kit engineered for select late model Polaris UTVs and ATVs. Using a 10W-50 powersports-specific formula, this kit delivers high-temperature stability and strong wear protection for demanding off-road riding.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-synthetic protection\u003c\/strong\u003e - PAO and Ester base stocks provide excellent film strength and resistance to breakdown under sustained high RPM and load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced wear control\u003c\/strong\u003e - 2200 ppm of ZDDP antiwear additive helps guard cams, followers and heavily loaded engine parts commonly stressed in UTV\/ATV use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized 10W-50 viscosity\u003c\/strong\u003e - 10W-50 grade supports easier cold starts while maintaining viscosity at operating temperature for off-road riding and towing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete lubrication kit\u003c\/strong\u003e - Bundles the fluids you need for an oil service on select late model Polaris vehicles, reducing guesswork when servicing your machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTV\/ATV focused formula\u003c\/strong\u003e - Designed for off-road powersports duty where dust, heat and heavy loads demand more from your engine oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRed Line UTV\/ATV 10W50 full-synthetic engine oil in 946 ml (1 US quart) bottles (PowerPack kit configuration as supplied by Red Line)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Red Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 90220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e UTV\/ATV 10W50 PowerPack oil change kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil type:\u003c\/strong\u003e Full-synthetic engine oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase stocks:\u003c\/strong\u003e PAO and Ester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity grade:\u003c\/strong\u003e 10W-50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZDDP content:\u003c\/strong\u003e 2200 ppm anti-wear additive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer size:\u003c\/strong\u003e 946 ml (1 US quart) bottles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e Off-road \/ powersports UTV and ATV applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage weight:\u003c\/strong\u003e 12.8 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 16.45 in L x 8.58 in W x 9.37 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit lubrication kit designed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect late model Polaris vehicles, including 2009+ RZR models (per Red Line product documentation)\u003c\/li\u003e\n\u003cli\u003eSelect late model Polaris vehicles, including 2010+ RGR (Ranger) models (per Red Line product documentation)\u003c\/li\u003e\n\u003cli\u003eSpecific Polaris Hawkeye, Ace and Sportsman ATVs (per Red Line product documentation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause Polaris coverage depends on specific engines and configurations, users must confirm compatibility with their exact year, model and submodel before installation using their vehicle manual or Red Line's application information.\u003c\/p\u003e","brand":"RED LINE","offers":[{"title":"Default Title","offer_id":53219252404521,"sku":"90220","price":164.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8ffcce42-7c29-45b0-b636-dd65ca1e7fba.jpg?v=1780204426"},{"product_id":"klotz-atvutv-8090-atv-utv-differential-oil-80w90","title":"Klotz ATV\/UTV Front\/Rear Differential Lube 80W-90 32oz","description":"\u003cp\u003eKlotz ATVUTV-8090 is a synthetic 80W90 differential gear oil engineered specifically for ATV and UTV front and rear ends. Designed for demanding off-road use, this differential lube helps protect gears, bearings, and seals under high loads and shock conditions, making it an ideal choice for riders who push their machines hard.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynthetic 80W90 protection\u003c\/strong\u003e - Stable viscosity gear oil helps maintain a strong lubricating film across a wide temperature range to protect gears under heavy load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear differential use\u003c\/strong\u003e - Formulated for both front and rear ATV\/UTV differentials so you can service multiple housings with the same fluid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced wear protection\u003c\/strong\u003e - Additive package is designed to reduce metal-to-metal contact, helping extend differential gear and bearing life in aggressive riding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion and foam control\u003c\/strong\u003e - Helps resist rust, corrosion, and foaming for more consistent lubrication in wet, muddy, or dusty environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-to-handle 1 qt bottle\u003c\/strong\u003e - 32 oz container size provides enough fluid for many ATV\/UTV differential services while remaining easy to store and pour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) 1-quart (32 oz) bottle of Klotz ATV\/UTV Front\/Rear End Differential Lubricant 80W90 (MPN: ATVUTV-8090)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Klotz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ATVUTV-8090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e ATV\/UTV differential gear oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity Grade:\u003c\/strong\u003e 80W90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Stock:\u003c\/strong\u003e Synthetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 1 quart (32 oz \/ 946 ml)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e ATV and UTV front and rear differentials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Slip Additive:\u003c\/strong\u003e No built-in limited slip friction modifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold individually\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate Weight:\u003c\/strong\u003e 1.98 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate Dimensions:\u003c\/strong\u003e 11.0 in L x 3.0 in W x 3.0 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement differential fluid for a wide range of ATV and UTV front and rear differentials that specify a synthetic 80W90 gear oil. Always verify your owner's manual or service manual for the correct viscosity and specification before use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal ATV\/UTV applications requiring 80W90 synthetic gear oil (front or rear differential)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KLOTZ","offers":[{"title":"Default Title","offer_id":53219252437289,"sku":"ATVUTV-8090","price":16.7,"currency_code":"USD","in_stock":true}]},{"product_id":"gates-21r4140-g-force-redline-cvt-belt-polaris-rzr","title":"Gates G-Force RedLine CVT Belt for 2011-2014 Polaris RZR XP 900\/1000","description":"\u003cp\u003eUnlock maximum performance from your ATV or UTV with the \u003cstrong\u003eGates G-Force RedLine 21R4140 drive belt\u003c\/strong\u003e, purpose-built for today’s most demanding off-road CVT applications.\u003csup\u003e\u003c\/sup\u003e Whether you are running hard in the dunes, rock gardens, desert washes, or on race courses, this belt is engineered to keep delivering consistent power when standard belts start to fade.\u003csup\u003e\u003c\/sup\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe G-Force RedLine series uses a proprietary \u003cstrong\u003eEthylene Elastomer (EE) compound\u003c\/strong\u003e that dramatically improves heat resistance and recovery compared to conventional CVT belts.\u003csup\u003e\u003c\/sup\u003e This next-generation compound provides \u003cstrong\u003emaximum transverse and axial stiffness\u003c\/strong\u003e, allowing the belt to carry higher continuous loads and peak torque without excessive deformation or slip.\u003csup\u003e\u003c\/sup\u003e The result is less heat fade, reduced speed loss, and more efficient power transfer under extreme conditions.\u003c\/p\u003e\n\n\u003cp\u003eIn real-world riding, that advanced construction translates into \u003cstrong\u003equicker acceleration and higher potential top speeds\u003c\/strong\u003e, with less energy lost through belt flex and friction.\u003csup\u003e\u003c\/sup\u003e Riders benefit from a more responsive throttle feel and more consistent clutching as temperatures climb. Even during severe duty cycles, the belt’s enhanced heat recovery helps maintain performance, so you can stay on the throttle longer with greater confidence.\u003csup\u003e\u003c\/sup\u003e\u003c\/p\u003e\n\n\u003cp\u003eDurability is another core advantage of the G-Force RedLine 21R4140. The belt is designed for \u003cstrong\u003eimproved crack, wear and chunking resistance\u003c\/strong\u003e, extending service life in harsh environments.\u003csup\u003e\u003c\/sup\u003e Lab and field testing show significantly longer life versus many aftermarket alternatives when subjected to high loads, elevated temperatures, and aggressive riding styles.\u003csup\u003e\u003c\/sup\u003e For riders who regularly haul, climb, or run big power, this added durability can mean fewer belt changes and more uninterrupted ride time.\u003c\/p\u003e\n\n\u003cp\u003eThe G-Force RedLine construction also helps \u003cstrong\u003ereduce environmental impact\u003c\/strong\u003e by eliminating harmful chlorinated compounds from the belt materials, while still delivering the high power capacity modern machines require.\u003csup\u003e\u003c\/sup\u003e Every belt in this line is extensively lab and field tested to validate performance in real off-road conditions before it reaches your machine.\u003csup\u003e\u003c\/sup\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you are upgrading clutches, adding power, or simply tired of inconsistent belt performance, the Gates G-Force RedLine 21R4140 is a strong choice for demanding riders. Combine it with proper clutch setup and cooling for a robust, efficient CVT system that is ready for hard trail use, racing, and heavy work alike.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This drive belt is vehicle specific. Always verify part number 21R4140 against your ATV\/UTV fitment before installation.\u003c\/p\u003e","brand":"GATES","offers":[{"title":"Default Title","offer_id":53219252502825,"sku":"21R4140","price":167.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e099c146-1a14-4ab2-92c0-023ea4cef643.jpg?v=1780204316"},{"product_id":"bolt-rzr-rivets-m8-atv-utv","title":"BOLT M8 Pry Rivet Set 50-Pack for Polaris RZR ATV\/UTV SxS","description":"\u003cp\u003eBOLT \u003cstrong\u003eRZR-RIVETS\u003c\/strong\u003e is an M8 pry rivet set designed for ATV and UTV fastening applications where factory-style panel retention matters. Built with black nylon construction, this 50-pack offers lightweight, durable replacement hardware for common powersports bodywork needs.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-size fit\u003c\/strong\u003e - M8 pry rivets are made to match common OEM-style fastening needs on ATV\/UTV equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable nylon construction\u003c\/strong\u003e - Helps provide dependable retention while keeping weight low.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-piece package\u003c\/strong\u003e - Supplies enough rivets for multiple repairs, maintenance jobs, or complete panel refreshes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack finish\u003c\/strong\u003e - Delivers a clean OEM-style appearance on visible panels and trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e50 pry rivets\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e BOLT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e RZR-RIVETS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 819648022950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e M8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.25 in L x 4. No specific year, make, model, submodel, position, or side fitment was explicitly provided in the available documentation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOLT","offers":[{"title":"Default Title","offer_id":53219252535593,"sku":"RZR-RIVETS","price":18.21,"currency_code":"USD","in_stock":true}]},{"product_id":"ultimax-ua476-cvt-drive-belt-polaris-ranger-1000-diesel","title":"Ultimax UA Drive Belt for 2015-18 Polaris Ranger 1000 Diesel","description":"\u003cp\u003eThe Ultimax UA476 CVT drive belt is a premium replacement belt engineered specifically for Polaris Ranger 1000 Diesel 4x4 models. Designed with aramid-reinforced construction and a precision profile, this Ultimax UA series belt helps restore crisp throttle response and reliable power transfer in demanding ATV and UTV use.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable power delivery\u003c\/strong\u003e - Application-specific dimensions and profile help maintain proper clutch calibration for smooth engagement and consistent acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid-reinforced strength\u003c\/strong\u003e - Strong aramid cord and a fiber-loaded rubber compound are built to handle the high torque loads of work and trail riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved belt grip\u003c\/strong\u003e - The compound is formulated to grip your clutch sheaves, reducing slip and helping to keep engine RPM in the optimal range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium replacement solution\u003c\/strong\u003e - Replaces the original CVT drive belt on your Polaris Ranger 1000 Diesel 4x4 to help restore performance when the OE belt is worn or glazed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent quality\u003c\/strong\u003e - Ultimax UA belts by Timken are manufactured to tight dimensional tolerances for repeatable fit and performance from belt to belt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Ultimax UA476 CVT drive belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ultimax Belts by Timken\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e UA (ATV\/UTV drive belt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt type:\u003c\/strong\u003e CVT drive belt for primary\/secondary clutch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside circumference:\u003c\/strong\u003e 43-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop width:\u003c\/strong\u003e 15\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aramid cord with fiber-loaded rubber compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforcement:\u003c\/strong\u003e Aramid (Kevlar) cord construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.93 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 15.1 in L x 5.7 in W x 1.5 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement CVT drive belt for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2018 Polaris Ranger 1000 Diesel 4x4 (CVT drive belt)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis belt is intended for stock clutching and tire sizes. Always verify your exact year and model before installation and inspect clutches for wear when replacing a belt.\u003c\/p\u003e","brand":"ULTIMAX BELTS","offers":[{"title":"Default Title","offer_id":53219253125417,"sku":"UA476","price":170.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6db695a2-369e-4525-80e1-eb60ae5f7dd5.jpg?v=1780204445"},{"product_id":"ultimax-ua433-cvt-drive-belt-argo-bigfoot-6x6","title":"Ultimax UA Drive Belt for 1993-2007 Argo 6X6 8X8 Amphibious","description":"\u003cp\u003eThe Ultimax UA433 by Timken is a premium CVT drive belt engineered as a direct replacement for the factory belt on 1998-2006 Argo Bigfoot 6x6 vehicles. Designed specifically for ATV, UTV and side-by-side applications, this Ultimax UA series belt delivers smooth engagement, dependable power transfer and long-lasting performance in demanding off-road conditions.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-specific CVT design\u003c\/strong\u003e - Built for the Argo Bigfoot 6x6 to provide consistent clutch engagement and strong acceleration across the operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid-reinforced cords\u003c\/strong\u003e - High-strength aramid fiber cord construction resists stretching to help the belt maintain its profile and performance under heavy load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise width and circumference\u003c\/strong\u003e - Top width of 1-29\/64 inches and outside circumference of 52-1\/8 inches help maintain correct clutch sheave spacing and optimal ratio changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable rubber compounds\u003c\/strong\u003e - Specially formulated belt compounds are designed to handle more load and abuse than typical stock belts for reliable service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e - Designed to install in the stock CVT system with no modifications, so you can get back on the trail quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Ultimax UA433 CVT drive belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ultimax by Timken\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Ultimax UA ATV\/UTV drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt type:\u003c\/strong\u003e CVT drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber with aramid-reinforced cords\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop width:\u003c\/strong\u003e 1-29\/64 in. (approx. 1.453 in.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside circumference:\u003c\/strong\u003e 52-1\/8 in. (approx. 52.125 in.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.68 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 15.1 in. L x 5.7 in. W x 1.5 in. H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1998-2006 Argo Bigfoot 6x6 (CVT drive belt)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ULTIMAX BELTS","offers":[{"title":"Default Title","offer_id":53219253289257,"sku":"UA433","price":136.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_ca5d455d-de15-4195-b7d0-5537c31bd729.jpg?v=1780204185"},{"product_id":"ebc-utvx6275-rear-brake-rotor-polaris-sportsman","title":"EBC UTVX Rear Brake Rotor for 2006-2024 Polaris Sportsman Ranger RZR","description":"\u003cp\u003eThe \u003cstrong\u003eEBC UTVX6275 Brake Rotor\u003c\/strong\u003e is engineered specifically for demanding ATV, UTV and side-by-side riders who need reliable stopping power in real off-road conditions. Designed as a high-quality replacement for your stock rotor, it combines EBC's advanced materials and precision manufacturing for stronger, more consistent braking performance.\u003c\/p\u003e\n\n\u003cp\u003eThis UTVX series rotor features a distinctive \u003cstrong\u003elightweight vee-profiled contour\u003c\/strong\u003e that not only looks aggressive, but also works to continuously clear mud, sand and trail debris from the braking surface. This self-cleaning design helps maintain consistent friction between the rotor and pads, improving lever feel and reducing the chance of fade when you're working the brakes hard.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from \u003cstrong\u003eheat-treated and tempered stainless steel\u003c\/strong\u003e, the UTVX6275 offers excellent strength and wear resistance for off-road use. The rotor is precision ground to ensure \u003cstrong\u003eparallel geometry and a smooth, flat braking surface\u003c\/strong\u003e, which helps prevent pulsation and promotes even pad contact over the entire face of the disc. The result is smoother braking, better feedback and more confidence on steep descents and technical terrain.\u003c\/p\u003e\n\n\u003cp\u003eWhether you are replacing a worn or warped rotor or upgrading during a complete brake refresh, this EBC UTVX rotor is built to handle hard miles in dirt, mud and rocky environments. Pair it with quality brake pads to take full advantage of the rotor's design and restore crisp, predictable stopping performance to your machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTVX series design for ATV, UTV and side-by-side applications\u003c\/li\u003e\n\u003cli\u003eVee-profiled, self-cleaning rotor shape helps clear debris from the pad contact area\u003c\/li\u003e\n\u003cli\u003eHeat-treated stainless steel construction for durability and consistent performance\u003c\/li\u003e\n\u003cli\u003ePrecision-ground braking surface for smooth, predictable lever feel\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for the original brake rotor on compatible vehicles\u003c\/li\u003e\n\u003cli\u003eIdeal for aggressive trail riding, work use and recreational off-road driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNote: Always confirm rotor dimensions and bolt pattern against your original part to ensure proper fitment on your specific vehicle before installation.\u003c\/em\u003e\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":53219253322025,"sku":"UTVX6275","price":139.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_8fd68b88-fd4d-4a2b-92c4-fe49b9969886.jpg?v=1780204471"},{"product_id":"ultimax-ua428-cvt-drive-belt","title":"Ultimax UA428 CVT Drive Belt for 2005-2015 Argo 8X8 Avenger","description":"\u003cp\u003eThe Ultimax by Timken UA428 CVT drive belt is designed as a durable replacement for ATV and UTV applications, delivering reliable power transfer and everyday performance. Built as part of the Ultimax UA series, this belt uses aramid cord reinforcement and a purpose-built rubber compound to stand up to demanding off-road use.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable aramid-reinforced construction\u003c\/strong\u003e - Aramid cord helps control belt stretch for consistent clutch engagement and reduced slip under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to handle more load and abuse\u003c\/strong\u003e - Engineered to outperform many stock belts in towing, hauling, and trail riding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, efficient power delivery\u003c\/strong\u003e - Precision-molded belt profile promotes smooth shifting and efficient power transfer through your CVT system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-focused UA series design\u003c\/strong\u003e - Each UA belt is built for specific ATV\/UTV applications rather than a one-size-fits-all approach, supporting reliable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA quality\u003c\/strong\u003e - Manufactured by Ultimax by Timken with strict dimensional control for consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Ultimax by Timken UA428 CVT drive belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ultimax by Timken\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e UA428\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt type:\u003c\/strong\u003e CVT drive belt (UA series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aramid-reinforced rubber construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar\/aramid reinforced:\u003c\/strong\u003e Yes, aramid cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e null\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.09 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping dimensions (L x W x H):\u003c\/strong\u003e 15.1 x 5.7 x 1.5 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for select ATV and UTV CVT applications. Specific year, make, and model coverage for part number UA428 was not provided in the available fitment charts. Please verify compatibility with your vehicle using an official Ultimax fitment guide or your service manual before ordering.\u003c\/p\u003e","brand":"ULTIMAX BELTS","offers":[{"title":"Default Title","offer_id":53219253354793,"sku":"UA428","price":133.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_fa521380-70a1-4a05-a00b-d9ef0d5de4bf.jpg?v=1780204229"},{"product_id":"pivot-works-yamaha-upper-rear-a-arm-kit-pwaak-y12-000ur","title":"Pivot Works Upper Rear A-Arm Bearing Kit for Yamaha Grizzly Rhino","description":"\u003cp\u003eReplace worn rear upper A-arm components and bring your Yamaha’s steering back under control with this Pivot Works A-Arm Kit. Designed to match OEM fit and performance, this complete kit includes the bearings, pins, collars and seals needed to refresh both left and right A-arms. Ideal for restoring predictable handling, reducing play and extending the life of your suspension.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRebuilds worn upper rear A-arm pivots to restore precise handling and suspension control\u003c\/li\u003e\n\u003cli\u003eComplete kit serves both left and right upper rear A-arms in a single package\u003c\/li\u003e\n\u003cli\u003eIncludes quality bearings, pins, collars and seals for a full pivot rebuild\u003c\/li\u003e\n\u003cli\u003eSealed components keep out dirt, water and mud for longer service life\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for Yamaha Rhino 450, Grizzly and Kodiak rear suspension\u003c\/li\u003e\n\u003cli\u003eEliminates suspension play, clunks and uneven tire wear caused by worn pivots\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha Rhino 450 (2006-2009)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM350 Grizzly IRS (2008-2011)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM400 Big Bear IRS (2008-2012)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM400 Grizzly IRS (2008)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM450 Grizzly IRS (2008-2014)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM450 Grizzly EPS (2011-2014)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM550 Grizzly (2009-2014)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM550 Grizzly EPS (2009-2014)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM660 Grizzly (2008)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM700 Grizzly (2008-2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YFM700 Grizzly EPS (2008-2025)\u003c\/li\u003e\n\u003cli\u003eYamaha Kodiak 450 4WD (2018-2025)\u003c\/li\u003e\n\u003cli\u003eYamaha Kodiak 450 EPS 4WD (2018-2025)\u003c\/li\u003e\n\u003cli\u003eYamaha Kodiak 700 4WD (2016-2025)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PIVOT WORKS","offers":[{"title":"Default Title","offer_id":53219422044457,"sku":"PWAAK-Y12-000UR","price":92.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_2d5855d5-9611-4b61-ab08-9ad184e11ff1.jpg?v=1780204479"},{"product_id":"kfi-utv-plow-mount-106675-kawasaki-ridge-1000","title":"KFI UTV Front Plow Mount for 2024-2026 Kawasaki Ridge 1000","description":"\u003cp\u003eOutfit your Kawasaki Ridge 1000 for serious winter work with the KFI 106675 UTV plow mount. Built from heavy-duty 1\/4\" Grade 50 steel and finished with a tough coating, this front mount gives your KFI plow system a solid, reliable attachment point on 2024+ Kawasaki Ridge models.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong 1\/4\" Grade 50 steel construction\u003c\/strong\u003e - Handles the stress of pushing heavy, packed snow without bending or twisting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable coated finish\u003c\/strong\u003e - Heavy-duty, powder coated surface helps resist rust and corrosion from snow, slush, and road salt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation\u003c\/strong\u003e - Designed as a bolt-on mount for the Ridge chassis, with only minor drilling potentially required, so you can install it with standard tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure plow connection\u003c\/strong\u003e - Integrated plow mounting tabs ensure a precise, tight fit with KFI UTV plow push tubes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e - Quality manufacturing and materials for dependable performance season after season.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront UTV plow mount bracket (KFI 106675 assembly)\u003c\/li\u003e\n\u003cli\u003eMounting brackets as required by KFI design\u003c\/li\u003e\n\u003cli\u003eComplete hardware kit for installation\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e KFI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 106675\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e UTV front plow mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/4\" Grade 50 steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Heavy-duty powder coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Bolt-on mount, may require some drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.95 lbs (approximate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14.0 in (L) x 8.0 in (W) x 4.0 in (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade In:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement plow mount for the following vehicles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2024+ Kawasaki Ridge 1000 (front)\u003c\/li\u003e\n\u003cli\u003e2025 Kawasaki KWF1000 Ridge (front)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis mount is engineered to work with KFI UTV plow systems on Kawasaki Ridge models, providing a secure front mounting point for your plow blade.\u003c\/p\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53219422732585,"sku":"106675","price":125.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e790bfce-1abb-4860-9325-30cee8e73505.png?v=1780204239"},{"product_id":"kfi-105480-utv-plow-mount-cfmoto-zforce-600","title":"UTV PLOW MOUNT KIT","description":"\u003cp\u003eThe \u003cstrong\u003eKFI 105480 UTV plow mount\u003c\/strong\u003e is a front-mount snow plow bracket designed for select Cfmoto UTVs. Built from 3\/16\" Grade 50 steel with 1\/4\" thick Grade 50 pin tabs, it provides a solid mounting point for KFI plow systems while adding a built-in 2\" receiver hitch for extra versatility.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable steel construction\u003c\/strong\u003e - Made from 3\/16\" Grade 50 steel with 1\/4\" thick Grade 50 pin tabs for dependable mounting strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-mount design\u003c\/strong\u003e - Places the plow connection at the front of the machine for a dedicated snow-clearing setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in receiver hitch\u003c\/strong\u003e - Includes a lower 2\" receiver hitch for added utility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment-specific support\u003c\/strong\u003e - Designed for select 2012-2015 Cfmoto UTV applications listed below.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUTV plow mount kit\u003c\/li\u003e\n\u003cli\u003eLower 2\" receiver hitch (built-in)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e KFI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 105480\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 705105083797\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" Grade 50 steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Tabs:\u003c\/strong\u003e 1\/4\" thick Grade 50 steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.9 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14.0\" L x 14.0\" W x 3.0\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Front-mount UTV plow mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires stock front bumper and drilling; tubes sold separately: 105635; recommends plow pulley 105270\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2012 Cfmoto Terracross Z6 (front)\u003c\/li\u003e\n\u003cli\u003e2013-2015 Cfmoto ZFORCE 600 \/ 600EX (front)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53219422994729,"sku":"105480","price":114.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f13e4d10-d947-463b-b914-56d40c78970b.png?v=1780204420"},{"product_id":"kfi-105555-utv-plow-mount-front-mount-kit","title":"KFI UTV Plow Mount Kit for Hisun Massimo Coleman Cub Cadet UTV","description":"\u003cp\u003eEquip your UTV for serious winter work with the KFI 105555 UTV Plow Mount Kit. This front-mount, frame-mounted bracket system is engineered to pair with KFI front-mount plow setups, giving you a strong, reliable connection between your machine and the plow blade.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRock-solid front-mount design\u003c\/strong\u003e - Frame-mount bracket securely connects KFI plow push tubes to your UTV for confident plowing and precise control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty Grade 50 steel construction\u003c\/strong\u003e - Plate is built from 3\/16 inch Grade 50 steel to handle heavy snow loads and demanding use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable black powdercoated finish\u003c\/strong\u003e - Protective coating helps resist rust and corrosion in wet, salty winter conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTV-specific mounting geometry\u003c\/strong\u003e - Designed to match the frame shape of compatible Hisun, Massimo, Bennche, and Coleman UTVs for proper plow positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit for one machine\u003c\/strong\u003e - Includes the mount plate and installation hardware as specified by KFI so you can bolt up and go.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKFI 105555 UTV front-mount plow bracket\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit (per KFI installation instructions)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions from KFI Products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e KFI Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 105555\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e Front-mount, frame mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Grade 50 steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black powdercoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit sale quantity:\u003c\/strong\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (packaged):\u003c\/strong\u003e 14.0 in L x 6.0 in W x 4.0 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit UTV-specific front-mount plow bracket designed for compatible Hisun, Massimo, Bennche, and Coleman UTV models when used with KFI front-mount plow systems. Refer to the KFI Products application chart or your vehicle manual to confirm exact year and model compatibility before ordering.\u003c\/p\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":53219423125801,"sku":"105555","price":99.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_de65fc99-30cf-482c-8a99-ad9643ff65e2.png?v=1780204234"},{"product_id":"gates-27r4159-g-force-redline-cvt-belt","title":"Gates G-Force RedLine CVT Belt for Polaris RZR XP \/ General 1000","description":"\u003cp\u003eThe Gates G-Force RedLine 27R4159 CVT drive belt is engineered for high-performance ATV and UTV applications where hard launches, high RPM, and extreme terrain are the norm. This premium powersports CVT belt delivers reliable power transfer and long service life for riders who push their machines to the limit.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance power delivery\u003c\/strong\u003e - Optimized for aggressive acceleration and higher top speeds in demanding off-road conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid-reinforced construction\u003c\/strong\u003e - Aramid fiber cord helps resist stretching and maintain consistent belt geometry for more stable CVT ratios over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved durability under heat and load\u003c\/strong\u003e - G-Force RedLine design is built to handle high belt temperatures and heavy loads common in powersport CVT systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision fit for CVT systems\u003c\/strong\u003e - 1.281 inch width and 42.887 inch outside circumference promote proper engagement and efficient power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy OEM replacement\u003c\/strong\u003e - Direct-fit alternative to Polaris 3211180 and interchangeable with Dayco XTX2275 and NAPA 27C4159 for simplified belt selection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGates G-Force RedLine CVT drive belt (part number 27R4159)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Gates G-Force RedLine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt type:\u003c\/strong\u003e CVT drive belt for powersport vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop width:\u003c\/strong\u003e 33 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch width:\u003c\/strong\u003e 1.181 in (30 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside circumference:\u003c\/strong\u003e 42.887 in (1089 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall width:\u003c\/strong\u003e 1.0 x 6.0 x 1.4 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for powersport vehicles using a CVT drive belt with approximately 1.281 inch width and 42.887 inch outside circumference. Always verify belt size and OEM part number before installation.\u003c\/p\u003e\n\u003cp\u003eReplaces OEM Part(s): Polaris 3211180, Dayco XTX2275, NAPA 27C4159\u003c\/p\u003e","brand":"GATES","offers":[{"title":"Default Title","offer_id":53219423977769,"sku":"27R4159","price":167.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1ae389b7-1d54-477b-94c7-a15e4b731050.jpg?v=1780204389"},{"product_id":"ebc-utvx6173-brake-rotor-arctic-cat-atv","title":"EBC UTVX Stainless Brake Rotor for Arctic Cat \u0026 Kymco ATV\/UTV","description":"\u003cp\u003eThe \u003cstrong\u003eEBC UTVX Brake Rotor UTVX6173\u003c\/strong\u003e is a replacement rotor designed for select Arctic Cat UTV applications. Built for off-road use, this rotor uses EBC’s UTVX V-profiled contour to help promote self-cleaning performance while supporting dependable braking in mud, dust, and trail conditions. It is a \u003cstrong\u003eone-piece fixed rotor\u003c\/strong\u003e with a \u003cstrong\u003e203 mm\u003c\/strong\u003e outside diameter, making it a direct-fit style option for compatible vehicles.\u003c\/p\u003e\u003cp\u003eEBC describes the UTVX series as a lightweight rotor design for ATV, quad, and side-by-side machines, with a contour that looks great and helps improve brake performance. Manufacturer documentation also notes precision ground finishing and a smooth surface intended to support reduced pulsation and wear. For riders who want a durable replacement rotor for demanding off-road conditions, the UTVX6173 offers a practical performance-focused solution.\u003c\/p\u003e\u003cp\u003eThis rotor is listed as a \u003cstrong\u003erear\u003c\/strong\u003e fitment in manufacturer documentation, and fitment data shows compatibility across a range of select Arctic Cat vehicles. Because brake components must match exact year, make, model, and position, always verify vehicle fitment before ordering. If you need a replacement rotor that balances rugged construction with a clean, performance-oriented design, the EBC UTVX6173 is a strong choice for compatible Arctic Cat applications.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":53219424174377,"sku":"UTVX6173","price":139.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_b82479ea-6e64-45d6-a10a-6eb8c6f20bac.jpg?v=1780204518"},{"product_id":"pivot-works-pwaak-k05-000l-front-lower-a-arm-kit","title":"A-ARM KITS LOWER BAYOU, MULE, PRAIRIE","description":"\u003cp\u003eBring back the tight, controlled feel of your Kawasaki front suspension with the \u003cstrong\u003ePivot Works PWAAK-K05-000L Lower A-Arm Kit\u003c\/strong\u003e. Engineered to rebuild the \u003cstrong\u003efront lower A-arm pivot points\u003c\/strong\u003e, this kit is an ideal solution for Bayou, Mule and Prairie models that have developed play in the front end, vague steering or uneven tire wear.\u003csup\u003e\u003c\/sup\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete lower A-arm kit is designed as a fast, convenient alternative to sourcing individual parts. It includes the critical \u003cstrong\u003ebearings, pins, collars and seals\u003c\/strong\u003e required to return both lower A-arms to proper specification, helping restore factory-like suspension performance and handling.\u003csup\u003e\u003c\/sup\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete dual-side rebuild\u003c\/strong\u003e – One kit services both lower A-arms, so you get a matched set of components for consistent performance left to right.\u003csup\u003e\u003c\/sup\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved steering response\u003c\/strong\u003e – Tightens up worn pivot points that cause wandering, front-end clunks and uneven handling, improving confidence on trails and worksites.\u003csup\u003e\u003c\/sup\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuality replacement components\u003c\/strong\u003e – Bearings, pins, collars and seals are built to handle mud, water and heavy loads common in ATV and UTV use.\u003csup\u003e\u003c\/sup\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTime-saving solution\u003c\/strong\u003e – All required wear parts for the lower A-arms come in one box, simplifying ordering and installation compared with piecing together OEM components.\u003csup\u003e\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDesigned for Kawasaki Bayou, Mule \u0026amp; Prairie models\u003c\/strong\u003e, this Pivot Works kit targets the front lower A-arm locations, where suspension movement and contamination accelerate wear. Replacing these parts as a set helps prevent premature wear of adjoining components and keeps the front suspension operating smoothly.\u003c\/p\u003e\n\n\u003cp\u003eTypical symptoms that indicate it is time for an A-arm rebuild include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNoticeable play when you lift the front end and move the wheels side to side\u003c\/li\u003e\n  \u003cli\u003eClunking or knocking from the front suspension over bumps\u003c\/li\u003e\n  \u003cli\u003eWandering or vague steering, especially at speed\u003c\/li\u003e\n  \u003cli\u003eUneven or accelerated front tire wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAddressing these issues with a \u003cstrong\u003ededicated A-arm kit\u003c\/strong\u003e helps restore control and comfort, whether you use your Kawasaki for trail riding, ranch work or utility tasks. Pivot Works is widely known in the powersports industry for providing fast, easy and complete solutions to \u003cstrong\u003ebearing and chassis maintenance\u003c\/strong\u003e, making this kit a reliable choice for your next front-end refresh.\u003csup\u003e\u003c\/sup\u003e\u003c\/p\u003e\n\n\u003cp\u003eFitment is specific to select \u003cstrong\u003eKawasaki Bayou, Mule and Prairie\u003c\/strong\u003e models. Always verify your exact year and model in the fitment table before ordering, and replace components in pairs for best results.\u003c\/p\u003e","brand":"PIVOT WORKS","offers":[{"title":"Default Title","offer_id":53219424272681,"sku":"PWAAK-K05-000L","price":45.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_c8eb7803-f83b-4c6b-bd8c-c80ddd9c9b20.jpg?v=1780204546"},{"product_id":"ultimax-ua456-drive-belt-atv-utv","title":"Ultimax UA Drive Belt for 2012 Polaris RZR XP 800 (Europe)","description":"\u003cp\u003eThe Ultimax UA456 is an \u003cstrong\u003eATV\/UTV drive belt\u003c\/strong\u003e designed for CVT-equipped powersports applications that call for the UA456 designation. It is a replacement belt identified by manufacturer SKU UA456 and UPC 033259117779, making it a straightforward option when matching the correct belt number matters.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-specific replacement\u003c\/strong\u003e - Intended for ATV\/UTV use where a UA456 CVT belt is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy parts matching\u003c\/strong\u003e - The UA456 identifier helps reduce guesswork when sourcing the correct belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified shipping data\u003c\/strong\u003e - Listed at 0.82 lb with compact dimensions of 15.1 x 5.7 x 1.5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand-backed identification\u003c\/strong\u003e - Ultimax branding supports consistent replacement selection for service and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 Ultimax UA456 drive belt\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Drive belt \/ CVT belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Ultimax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer SKU:\u003c\/strong\u003e UA456\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 033259117779\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.82 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15.1 x 5.7 x 1.5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for applications that specify the UA456 belt number.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFitment chart not provided in the source documentation\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease review manufacturer details to ensure proper fitment before ordering.\u003c\/p\u003e","brand":"ULTIMAX BELTS","offers":[{"title":"Default Title","offer_id":53219424305449,"sku":"UA456","price":185.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_609397b0-9617-4c4f-9df8-2f31f018c643.jpg?v=1780204569"},{"product_id":"pivot-works-pwaak-y08-000u-front-upper-a-arm-kit","title":"Pivot Works Front Upper A-Arm Bearing Kit for Yamaha Rhino \u0026 Viking","description":"\u003cp\u003eThe Pivot Works PWAAK-Y08-000U Front Upper A-Arm Bearing Kit is a complete solution to refresh the front suspension on your Yamaha ATV or UTV. Designed specifically for the front upper A-arms, this kit replaces worn bearings and hardware so you can restore precise steering and smooth suspension performance on your Grizzly, Rhino, Viking, or Wolverine.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestore tight steering control\u003c\/strong\u003e - Replaces worn or rusted front upper A-arm bearings and hardware to eliminate play and wandering in the handlebars.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother suspension action\u003c\/strong\u003e - Yamaha kits are upgraded with needle roller bearings that significantly reduce friction for more consistent suspension movement under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete left and right coverage\u003c\/strong\u003e - The kit is assembled to service both left and right front upper A-arms on your machine, making a full front-end refresh straightforward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-spec precision fit\u003c\/strong\u003e - Bearings, pins, collars, and seals are manufactured to OEM specifications for a direct-fit replacement with no modifications required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for demanding off-road use\u003c\/strong\u003e - Engineered for the abuse of trail riding, hauling, and utility work so you can ride with confidence after your rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront upper A-arm needle roller bearings (for both sides)\u003c\/li\u003e\n\u003cli\u003eA-arm pivot pins\u003c\/li\u003e\n\u003cli\u003eCollars\u003c\/li\u003e\n\u003cli\u003eSeals\u003c\/li\u003e\n\u003cli\u003eAll components required to rebuild the front upper A-arm pivots (quantity as needed per application)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Pivot Works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e PWAAK-Y08-000U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Front upper A-arm bearing kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front upper (services left and right A-arms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Needle roller bearings on Yamaha applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bearings, pins, collars, and seals built to OEM specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.82 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.0 in L x 3.25 in W x 1.25 in H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e null (non-adjustable bearing kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel Length:\u003c\/strong\u003e null (does not change suspension travel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e null (does not include springs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement front upper A-arm bearing kit for a wide range of Yamaha ATVs and UTVs from 1999–2018, including key platforms such as Grizzly, Rhino, Viking, and Wolverine. Complete year\/model\/submodel coverage is based on the full DB Electrical applications list and is merged into our catalog so you can select your exact machine during checkout.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYamaha ATV \u0026amp; UTV applications from 1999–2018 (front upper A-arms, both left and right)\u003c\/li\u003e\n\u003cli\u003ePopular coverage includes Yamaha Grizzly, Kodiak, Rhino, Viking, and Wolverine families where specified in the fitment selector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your Yamaha appears in our fitment selector for part number PWAAK-Y08-000U, this kit will service the front upper A-arms on both sides of your vehicle.\u003c\/p\u003e","brand":"PIVOT WORKS","offers":[{"title":"Default Title","offer_id":53219600367913,"sku":"PWAAK-Y08-000U","price":46.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_01fc2d55-938e-47bd-83e0-6cd2bc3c8caa.jpg?v=1780356156"},{"product_id":"all-balls-25-1732-wheel-bearing-kit-odes-800-rear","title":"All Balls Rear Wheel Bearing Kit for Odes 800 Dominator UTV","description":"\u003cp\u003eThe All Balls Racing 25-1732 Wheel Bearing Kit is a direct-fit rear wheel solution for Odes 800 Dominator, Raider, and ATV 800 models. Built as a complete kit for one rear wheel, it helps restore smooth rolling performance, stable handling, and dependable operation on your Odes UTV or ATV.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestore smooth wheel performance\u003c\/strong\u003e - Replacing worn rear wheel bearings and seals reduces play and vibration so your Odes 800 tracks straight and handles predictably on and off road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete rear wheel kit\u003c\/strong\u003e - Designed to service one rear wheel, the kit includes the bearings and seals you need in one package, making garage work faster and more organized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for off-road use\u003c\/strong\u003e - Quality bearings and seals are engineered for ATV\/UTV duty to handle the loads, impacts, and contaminants common in trail and utility riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit for Odes 800 platforms\u003c\/strong\u003e - Application-specific design for Odes 800 Dominator and Raider models helps ensure proper fitment and alignment at the rear wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps protect against contaminants\u003c\/strong\u003e - New seals work with the bearings to help keep out water, mud, and grit that can shorten bearing life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel bearings for one wheel (Odes 800 rear application)\u003c\/li\u003e\n\u003cli\u003eRear wheel seals for one wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 25-1732\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rear wheel bearing and seal kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle type:\u003c\/strong\u003e Odes 800 UTV\/ATV platforms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit coverage:\u003c\/strong\u003e One rear wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.01 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 5.0 x 4.75 x 2.75 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Bearings and seals to rebuild one rear wheel (exact counts not specified)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement rear wheel bearing kit for Odes applications listed below. Always verify your model and position before installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOdes 800 2 Door Dominator (rear wheel)\u003c\/li\u003e\n\u003cli\u003eOdes 800 2 Raider Dominator (rear wheel)\u003c\/li\u003e\n\u003cli\u003eOdes 800 4 Door Dominator (rear wheel)\u003c\/li\u003e\n\u003cli\u003eOdes ATV 800 (rear wheel)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALL BALLS RACING","offers":[{"title":"Default Title","offer_id":53219600433449,"sku":"25-1732","price":34.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0c74cb3a-35a8-41f4-9f70-88cea01cd9a5.jpg?v=1780356596"},{"product_id":"ultimax-ua468-cvt-drive-belt-john-deere-gator","title":"Ultimax Drive Belt UA468 for 2004-2012 John Deere Gator CS\/CX","description":"\u003cp\u003eThe Ultimax UA468 CVT drive belt is an application-specific replacement for select John Deere Gator HPX and Trail 4x4 models. Engineered for zero stretch and maximum tensile strength, this Ultimax by Timken UA Series belt delivers consistent power transfer and long life in demanding ATV and UTV use.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent zero-stretch performance\u003c\/strong\u003e - Designed to maintain length under load so your Gator's CVT ratios stay consistent for smooth, predictable acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh tensile strength construction\u003c\/strong\u003e - Built to handle heavy work, towing, and off-road use without premature stretching or failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise OEM-matched dimensions\u003c\/strong\u003e - Outside circumference of 43-5\/8 inches and 1-7\/32 inch top width closely match the factory belt profile for proper clutch fit and engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved reliability\u003c\/strong\u003e - Manufactured with modern methods to reduce variability and eliminate many classic CVT belt failure modes for dependable service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit Gator replacement\u003c\/strong\u003e - Designed as a direct replacement for John Deere OEM belt M155037 on specific HPX and Trail Gator applications, simplifying maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Ultimax UA468 UA Series CVT drive belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ultimax by Timken\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e UA Series ATV\/UTV CVT drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e UA468\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Circumference:\u003c\/strong\u003e 43-5\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Width:\u003c\/strong\u003e 1-7\/32 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Type:\u003c\/strong\u003e CVT drive belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.94 lb (shipping weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 15.1 x 5.7 x 1.5 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJohn Deere Gator 4x4 HPX (drive belt)\u003c\/li\u003e\n\u003cli\u003eJohn Deere Gator 4x4 HPX Trail (drive belt)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplaces OEM Part(s): M155037\u003c\/p\u003e","brand":"ULTIMAX BELTS","offers":[{"title":"Default Title","offer_id":53219600531753,"sku":"UA468","price":131.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6c750451-07ac-46d4-9956-43c82a48ef71.jpg?v=1780356676"}],"url":"https:\/\/www.dirtmasters.com\/collections\/atv.oembed?page=2","provider":"Dirt Masters","version":"1.0","type":"link"}