{"title":"Air Intakes","description":"","products":[{"product_id":"s-b-particle-separator-for-2016-2018-polaris-rzr-xp-turbo","title":"S\u0026B 76-2007 Particle Separator, 2016-2021 Polaris RZR XP Turbo\/Turbo S","description":"\u003cp\u003eThe S\u0026amp;B 76-2007 Particle Separator is a powered, filterless pre-cleaner for the 2016-2021 Polaris RZR XP Turbo and 2018-2021 RZR XP Turbo S that ejects dust-laden air before it ever reaches the factory air filter.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFilterless pre-cleaner: it sits ahead of the factory airbox and takes the dust load off the stock filter, so there is no extra element to oil, wash or replace.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;B designed it to keep water, snow, sand and fine dust out of the intake, which is the whole point of a pre-cleaner in dune and desert country.\u003c\/li\u003e\n\u003cli\u003eBillet mounting clamps sized for 1.75 inch tubing let it go on either the upper or the lower roll bar, so it can be positioned around most roof and cage configurations.\u003c\/li\u003e\n\u003cli\u003eSupplied with a 39 inch duct, long enough to route from an upper-bar mount down to the factory airbox inlet.\u003c\/li\u003e\n\u003cli\u003eDraws only 3.1 amps, so it plans easily into an existing accessory circuit.\u003c\/li\u003e\n\u003cli\u003eWorks with the stock airbox and stock filter — it is an addition to the factory intake, not a replacement for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eS\u0026amp;B lists the 76-2007 Particle Separator for the 2016-2021 Polaris RZR XP Turbo and the 2018-2021 Polaris RZR XP Turbo S. Those are S\u0026amp;B's own published years for this part number.\u003c\/p\u003e\n\u003cp\u003eMounting is by a pair of billet clamps sized for 1.75 inch roll bar tubing, and the kit's duct is 39 inches, so the unit can sit on the upper or the lower bar depending on the roof you run and how you want to route the duct to the airbox inlet.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;B writes the fitment for this part by platform rather than by seat count and does not separately call out the four-seat XP 4 Turbo on this product page. If you run a four-seat car, confirm the mounting position and duct routing with S\u0026amp;B before ordering. Nothing on S\u0026amp;B's page rules the four-seat car out — it simply is not named either way.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":7311410036769,"sku":"76-2007","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/products\/76-2007_2.png?v=1527293764"},{"product_id":"s-b-air-filter-for-2014-2019-polaris-rzr-xp-1000-turbo","title":"S\u0026B 66-6006 Air Filter, 2014-2026 Polaris RZR XP 1000\/Turbo\/Pro XP\/RS1","description":"\u003cp\u003eThe S\u0026amp;B 66-6006 is a dry, cleanable replacement air filter that drops into the factory airbox of the Polaris RZR XP 1000, RZR XP Turbo and Turbo S, RZR Pro XP, RS1, Turbo R and Pro S, replacing Polaris filters 1241084, 1240957, 1240822 and 7081864.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt on S\u0026amp;B's proprietary dry synthetic media — there is no filter oil to buy, apply, or over-apply after a cleaning.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;B publishes 99.96% filtration efficiency for this filter on the ISO 5011 test standard.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;B publishes 15.3% better airflow than the stock Polaris filter.\u003c\/li\u003e\n\u003cli\u003eCleanable and reusable: S\u0026amp;B rates the filter for ten cleaning services before it should be retired.\u003c\/li\u003e\n\u003cli\u003eDirect drop-in for the factory airbox — it uses the stock box and lid, so no intake system, ducting or tune change is involved.\u003c\/li\u003e\n\u003cli\u003eOne filter number covers the whole RZR XP 1000 \/ Turbo \/ Pro XP family from 2014 through 2026, so a spare on the shelf suits more than one car in a mixed garage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) S\u0026amp;B 66-6006 replacement air filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eS\u0026amp;B lists 66-6006 for the Polaris RZR XP 1000 from 2014 through 2026, the RZR XP Turbo from 2016 through 2026, the RZR XP Turbo S and the RS1 from 2018 through 2024, the RZR Pro XP from 2020 through 2026, the RZR Turbo R from 2022 through 2024, and the RZR Pro S from 2025 through 2026.\u003c\/p\u003e\n\u003cp\u003eThis is a factory-airbox replacement rather than an intake kit. S\u0026amp;B lists it as replacing Polaris filters 1241084, 1240957, 1240822 and 7081864, so the quickest confirmation is to pull your current filter and check the number printed on it. Two-seat and four-seat versions of these machines share the same airbox, so seat count does not change the filter.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;B does not state on this product page whether 66-6006 is also the element used inside an S\u0026amp;B intake or Particle Separator kit. If you are replacing the filter inside an aftermarket intake rather than the stock airbox, check the filter number called out in that kit's own instructions before ordering.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":12900261199895,"sku":"66-6006","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/products\/S_B-air-filter-66-6000-RWB-for-polaris-rzr.jpg?v=1541799463"},{"product_id":"cold-air-intake-j-tube-for-polaris-rzr-turbo","title":"Dynojet 96030011 J-Tube Charge Tube Kit, 16-21 Polaris RZR XP Turbo","description":"\u003cp\u003eThe Dynojet J-Tube Kit (96030011) is a fire red silicone charge tube that replaces the stock plastic J-tube on the 2016-2021 Polaris RZR XP Turbo, XP 4 Turbo, Turbo S and Turbo S4, and ships with the clamps and fittings needed to fit it.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from durable silicone instead of the stock plastic tube\u003c\/li\u003e\n\u003cli\u003eImproves airflow to the turbo\u003c\/li\u003e\n\u003cli\u003eDynojet builds it to last in any racing condition, so it stands up to the heat and vibration of hard use\u003c\/li\u003e\n\u003cli\u003eBright fire red finish that stands out against the engine bay\u003c\/li\u003e\n\u003cli\u003eComplete kit: the band clamps, T-bolt clamps and hose fittings are in the box\u003c\/li\u003e\n\u003cli\u003eCovers the whole 2016-2021 XP Turbo and Turbo S family, two-seat and four-seat, including the DYNAMIX, Fox, LE, Velocity and Lifted Lime editions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x J-tube assembly\u003c\/li\u003e\n\u003cli\u003e2 x male\/male hose fittings\u003c\/li\u003e\n\u003cli\u003e1 x screw\u003c\/li\u003e\n\u003cli\u003e4 x 1 inch band clamps\u003c\/li\u003e\n\u003cli\u003e1 x 90-98 mm T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e1 x 56-64 mm T-bolt clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDynojet publishes this part for the 2016-2021 Polaris RZR turbo family. That covers the RZR XP Turbo EPS and XP 4 Turbo EPS from 2016 to 2019, including the DYNAMIX, Fox and LE editions; the RZR XP Turbo and XP 4 Turbo from 2019 to 2021; the RZR XP Turbo S and XP 4 Turbo S from 2018 to 2020 including the Velocity editions; and the 2021 RZR Turbo S, Turbo S4, their Velocity editions and the Lifted Lime LE. Both two-seat and four-seat chassis are covered.\u003c\/p\u003e\n\u003cp\u003eThis is the XP Turbo family part. Dynojet builds a separate cold air intake J-tube for the RZR Pro XP and Turbo R, which is a different platform and a different part number, so check which chassis you have before ordering.\u003c\/p\u003e\n\u003cp\u003eDynojet states this part is not legal for sale or use in California.\u003c\/p\u003e","brand":"DynoJet","offers":[{"title":"Default Title","offer_id":48075889377577,"sku":"96030011","price":195.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/dynojet_j_tube_rzr_turbo_red.webp?v=1712675689"},{"product_id":"afe-magnum-force-stage-2-si-cold-air-intake-2005-2009-toyota-4runner-v8","title":"aFe Magnum FORCE Stage-2 Si Cold Air Intake for 2005-2009 Toyota","description":"\u003cp\u003eWake up the 4.7L V8 in your 2005-2009 Toyota 4Runner or Lexus GX470 with the aFe Magnum FORCE Stage-2 Si cold air intake (51-82502). It replaces the restrictive factory airbox with a high-flow, sealed system that pulls cooler, denser air for stronger throttle response and more power.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven gains up to +20 HP and +20 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eOutflows the factory intake by 66% for crisper throttle response\u003c\/li\u003e\n\u003cli\u003ePro DRY S synthetic filter is washable and reusable - no oiling required\u003c\/li\u003e\n\u003cli\u003eHeat-insulating roto-molded tube shields intake air from engine heat\u003c\/li\u003e\n\u003cli\u003eBolt-on install using factory mounting locations with all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoto-molded heat-insulating intake tube\u003c\/li\u003e\n\u003cli\u003ePro DRY S 360-degree inverted-top air filter\u003c\/li\u003e\n\u003cli\u003eBlack powder-coated aluminum cover with auxiliary inlet\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered for the 4th-generation Toyota 4Runner with the 4.7L V8 (1UZ\/2UZ-FE). Also fits the 2005-2009 Lexus GX470 4.7L V8, which shares the same platform and engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2005-2009 Toyota 4Runner 4.7L V8\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53227265229097,"sku":"51-82502","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_a89a0985-fce2-40d3-8118-8f8f255bc5e6.jpg?v=1780615424"},{"product_id":"afe-magnum-force-stage-2-si-cold-air-intake-tacoma-4l-51-81162","title":"aFe Magnum FORCE Stage-2 Si Intake for 05-11 Toyota Tacoma 4.0L","description":"\u003cp\u003eWake up your 4.0L V6 with the aFe Magnum FORCE Stage-2 Si Cold Air Intake System. Engineered for the 4.0L V6 in the 2005-2011 Toyota Tacoma, 2003-2009 4Runner and 2007-2009 FJ Cruiser, it ditches the restrictive factory airbox for a free-flowing, sealed intake that delivers cooler air, a stronger throttle response and a deeper intake growl.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven gains of up to +13 horsepower and +21 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eOutflows the factory intake by 119% with 189 CFM of measured airflow\u003c\/li\u003e\n\u003cli\u003eSealed one-piece housing with an aluminum cover blocks hot engine-bay air\u003c\/li\u003e\n\u003cli\u003eWashable and reusable Pro DRY S filter for low long-term maintenance\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and a deeper intake sound\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoto-molded intake tube\u003c\/li\u003e\n\u003cli\u003eSealed intake housing with aluminum cover\u003c\/li\u003e\n\u003cli\u003ePro DRY S dry (non-oiled) air filter\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eConfirmed application for the 4.0L V6 engine. This intake fits the 2005-2011 Toyota Tacoma (4.0L V6). The same part number also covers the 2003-2009 Toyota 4Runner and 2007-2009 Toyota FJ Cruiser with the 4.0L V6.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2005-2011 Toyota Tacoma 4.0L V6\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53227304321321,"sku":"51-81162","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_797caa8a-55bd-4e87-a9de-bccd823e9dfc.jpg?v=1781129312"},{"product_id":"kn-77-series-cold-air-intake-77-9039kp-2016-2023-toyota-tacoma-35l-v6","title":"K\u0026N 77 Series Cold Air Intake for 2016-2023 Toyota Tacoma 3.5L V6","description":"\u003cp\u003eThe K\u0026amp;N 77-9039KP is a 77-Series cold air intake for the 2016-2023 Toyota Tacoma 3.5L V6 with a mandrel-bent aluminum tube and a washable cotton filter.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Toyota Tacoma (2016-2023). CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThis is the Tacoma 3.5L intake; K\u0026amp;N's 77-9042KP is the equivalent for the 2022-2024 Tundra 3.4L twin-turbo V6.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53227304485161,"sku":"77-9039KP","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1a6f55a1-4eab-4e57-bfca-5d337f63c51f.jpg?v=1781129320"},{"product_id":"afe-momentum-gt-cold-air-intake-pro-5r-2022-2024-toyota-tundra-3-4tt","title":"aFe Momentum GT Cold Air Intake Pro 5R for 22-24 Toyota Tundra 3.4TT","description":"\u003cp\u003eWake up your 2022-2025 Toyota Tundra 3.4L twin-turbo V6 with the aFe Momentum GT cold air intake system. It pulls the engine's intake air through a sealed, enclosed housing for cooler, denser airflow and a deeper induction note under boost.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven gains over the restrictive factory airbox\u003c\/li\u003e\n\u003cli\u003eCooler, denser intake air for stronger throttle response\u003c\/li\u003e\n\u003cli\u003eSealed one-piece housing isolates the filter from engine heat\u003c\/li\u003e\n\u003cli\u003eWashable, reusable Pro 5R filter saves on replacement elements\u003c\/li\u003e\n\u003cli\u003eAggressive induction sound under boost\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMomentum GT sealed intake housing\u003c\/li\u003e\n\u003cli\u003ePro 5R pre-oiled, washable air filter\u003c\/li\u003e\n\u003cli\u003eIntake tube and required mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2022-2025 third-generation Toyota Tundra with the 3.4L twin-turbo V6, covering both the gas and i-FORCE MAX hybrid powertrains, with no cab restriction. Does not fit the discontinued 5.7L V8 Tundra.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2025 Toyota Tundra 3.4L twin-turbo V6 (gas)\u003c\/li\u003e\n\u003cli\u003e2022-2025 Toyota Tundra i-FORCE MAX 3.4L twin-turbo V6 (hybrid)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53227305992489,"sku":"50-70100R","price":556.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_5411ee36-7b5c-4b2b-9914-67ed5ee5a092.jpg?v=1781129398"},{"product_id":"kn-77-9042kp-cold-air-intake-2022-2024-toyota-tundra-v6","title":"K\u0026N 77 Series Cold Air Intake for 2022-2024 Toyota Tundra V6","description":"\u003cp\u003eThe K\u0026amp;N 77-9042KP is a 77-Series performance cold air intake for the 2022-2024 Toyota Tundra 3.4L twin-turbo i-FORCE V6 with a roto-molded tube and a washable High-Flow filter.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Toyota Tundra (2022-2024). CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThis is the Tundra 3.4L intake; K\u0026amp;N's 77-9039KP is the equivalent for the 2016-2023 Tacoma 3.5L V6.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53227306025257,"sku":"77-9042KP","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_5f4ab4d6-129e-4ca4-b04b-88af252ba2b9.jpg?v=1781129409"},{"product_id":"afe-magnum-force-stage-2-cold-air-intake-2021-2026-ford-f150-5-0l","title":"aFe Magnum FORCE Stage-2 Cold Air Intake for 2021-2026 Ford F-150 5.0L","description":"\u003cp\u003eUnlock the breathing potential of your 2021-2026 Ford F-150 5.0L V8 with the aFe Magnum FORCE Stage-2 Cold Air Intake. This direct bolt-on system ditches the restrictive factory airbox for a sealed, high-flow housing and a washable Pro 5R oiled filter, feeding your V8 cooler, denser air for stronger throttle response and a deeper intake growl.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven gains up to +19 horsepower and +20 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eFlows 600 CFM at 7\" H2O for a major increase over the stock airbox\u003c\/li\u003e\n\u003cli\u003eSealed housing isolates the filter from engine heat for cooler intake temps\u003c\/li\u003e\n\u003cli\u003eWashable, reusable Pro 5R oiled filter saves money over disposable filters\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on install using factory mounting points and included hardware\u003c\/li\u003e\n\u003cli\u003eAggressive intake sound under acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Pro 5R oiled air filter\u003c\/li\u003e\n\u003cli\u003e(1) Intake housing\u003c\/li\u003e\n\u003cli\u003e(1) Intake tube\u003c\/li\u003e\n\u003cli\u003e(2) Silicone couplings\u003c\/li\u003e\n\u003cli\u003e(4) Clamps\u003c\/li\u003e\n\u003cli\u003e(1) Seal trim\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the 14th-generation Ford F-150 with the naturally aspirated 5.0L V8 engine. This intake does not fit EcoBoost, 3.5L, 2.7L, or Raptor models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2026 Ford F-150 5.0L V8\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53227325161769,"sku":"54-13064R","price":387.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_280715c7-eb61-412f-939f-7d26bc13af26.jpg?v=1781129631"},{"product_id":"kn-63-2599-aircharger-cold-air-intake-ford-f150-35l-ecoboost","title":"K\u0026N 63 AirCharger Cold Air Intake for 2017-2024 Ford F-150 3.5L","description":"\u003cp\u003eThe K\u0026amp;N 63-2599 is a 63-series AirCharger cold air intake for the 2017-2024 Ford F-150 3.5L EcoBoost that improves airflow and throttle response over the factory air box.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ford F-150 (2017-2024). CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eFor the F-150 3.5L EcoBoost, the 63-2599 is the 63-series AirCharger; the 77-2617KC is the 77-series metal-tube alternative. Choose by tube material and styling.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53227326865705,"sku":"63-2599","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_d71380a9-b7f8-4529-9efa-1cbdf80689fd.jpg?v=1781129641"},{"product_id":"arb-safari-rspec-snorkel-ss82r-toyota-land-cruiser-80-series","title":"ARB Safari R-Spec Snorkel for 1990-1997 Toyota Land Cruiser 80 Series","description":"\u003cp\u003eThe ARB Safari R-Spec Snorkel (part number SS82R) relocates the engine's air intake to roof level for cool, clean, dry air on the 1990-1997 Toyota Land Cruiser 80 Series and the 1996-1997 Lexus LX450. It is molded from impact-resistant, UV-stable polyethylene for lasting durability in dust and water.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRelocates the air intake to roof level for improved deep-water capability\u003c\/li\u003e\n\u003cli\u003eSupplies cool, clean, dry air in excess of engine requirements\u003c\/li\u003e\n\u003cli\u003eMolded from impact-resistant, UV-stable polyethylene\u003c\/li\u003e\n\u003cli\u003eVehicle-specific fitment for a clean, factory-style installation\u003c\/li\u003e\n\u003cli\u003eHigh-flow body and ducting for unrestricted airflow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eR-Spec snorkel body and high-flow air ducting\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting hardware and fitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Safari R-Spec SS82R fits the 1990-1997 Toyota Land Cruiser 80 Series and the 1996-1997 Lexus LX450. It is specific to the 80 Series platform and does not fit the later 100 Series Land Cruiser or LX470.\u003c\/p\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":53227342528809,"sku":"SS82R","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6ba9c0e1-f510-4505-9d68-0177d536a227.jpg?v=1781129690"},{"product_id":"afe-momentum-gt-cold-air-intake-2020-2024-ford-explorer-2-3l-ecoboost-50-70108r","title":"aFe Momentum GT Cold Air Intake for 2020-2024 Ford Explorer 2.3L","description":"\u003cp\u003eWake up the turbocharged 2.3L EcoBoost in your 2020-2024 Ford Explorer with the aFe Momentum GT Cold Air Intake System. Engineered to replace the restrictive factory airbox, it delivers cooler, higher-volume airflow for sharper throttle response and a more aggressive intake tone.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutflows the factory intake by 13% (measured 220 CFM @ 7\" H2O)\u003c\/li\u003e\n\u003cli\u003eCooler air charge for improved throttle response and power\u003c\/li\u003e\n\u003cli\u003eWashable, reusable Pro 5R filter saves on replacement costs\u003c\/li\u003e\n\u003cli\u003eSealed housing with a clear sight window for quick filter inspection\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounting locations for a clean, secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealed intake housing with clear sight window\u003c\/li\u003e\n\u003cli\u003eDyno-tuned XLPE intake tube\u003c\/li\u003e\n\u003cli\u003eaFe Pro 5R washable conical air filter\u003c\/li\u003e\n\u003cli\u003ePremium silicone coupling and stainless-steel clamps\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis intake is engineered specifically for the 6th-generation Ford Explorer with the 2.3L EcoBoost turbocharged 4-cylinder engine. It does not fit the 3.0L V6 EcoBoost (ST\/Platinum) models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2020-2024 Ford Explorer - L4 2.3L EcoBoost (turbo)\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53227342659881,"sku":"50-70108R","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1a965ec8-9f6a-4075-a402-01ecc97f51be.jpg?v=1781129719"},{"product_id":"afe-momentum-gt-pro-5r-cold-air-intake-2021-2024-ford-f150-35l-ecoboost","title":"aFe Momentum GT Pro 5R Cold Air Intake 21-24 Ford F-150 3.5L EcoBoost","description":"\u003cp\u003eWake up the twin-turbo 3.5L EcoBoost in your 2021-2024 Ford F-150 with the aFe Momentum GT Cold Air Intake System. Engineered to replace the restrictive factory air box, it feeds the engine a high volume of cooler, filtered air for stronger throttle response and improved performance.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases airflow over the restrictive factory intake for more horsepower and torque\u003c\/li\u003e\n\u003cli\u003eSealed, one-piece roto-molded housing isolates the filter from hot engine air\u003c\/li\u003e\n\u003cli\u003e360-degree Pro 5R oiled filter maximizes surface area and filtration\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and a more aggressive intake sound\u003c\/li\u003e\n\u003cli\u003eDirect OE-style fit using factory mounting points for an easy install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealed roto-molded intake housing\u003c\/li\u003e\n\u003cli\u003eaFe Pro 5R oiled performance air filter\u003c\/li\u003e\n\u003cli\u003eIntake tube and required mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2021-2024 Ford F-150 equipped with the 3.5L EcoBoost twin-turbo V6 only.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2021-2024 Ford F-150 V6-3.5L (tt) EcoBoost\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit the 3.5L PowerBoost hybrid, 2.7L EcoBoost, or 5.0L V8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236712309033,"sku":"50-70072R","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1875bbb6-dd35-4013-9642-93186eb4b294.jpg?v=1781129950"},{"product_id":"afe-rapid-induction-cold-air-intake-pro-5r-ford-f150-50l-2021-2024","title":"aFe Rapid Induction Stage-2 Cold Air Intake for 21-24 Ford F-150 5.0L","description":"\u003cp\u003eWake up your 2021-2024 Ford F-150 5.0L V8 with the aFe Rapid Induction Stage-2 Cold Air Intake System. Engineered to replace the restrictive factory airbox, this kit pulls in more cool, dense air for stronger throttle response, added horsepower and torque, and a deeper intake growl under acceleration.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases airflow over the restrictive factory intake for more horsepower and torque\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and a more aggressive intake sound under load\u003c\/li\u003e\n\u003cli\u003eReusable, washable Pro 5R oiled cotton-gauze filter for high airflow and long service life\u003c\/li\u003e\n\u003cli\u003eSealed roto-molded housing isolates the filter from engine heat for cooler intake air\u003c\/li\u003e\n\u003cli\u003eRetains the factory mass-air-flow sensor location for proper calibration\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using factory mounting points and included hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Pro 5R oiled performance air filter\u003c\/li\u003e\n\u003cli\u003e(1) Plastic intake tube\u003c\/li\u003e\n\u003cli\u003e(1) Sheet metal intake housing\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the 2021-2024 Ford F-150 equipped with the 5.0L V8 engine. This intake is for the 5.0L V8 only and does not fit EcoBoost, PowerBoost hybrid, Raptor or Lightning models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2024 Ford F-150 5.0L V8\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236712341801,"sku":"52-10012R","price":338.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_2543d3cc-cf36-44c5-b53e-1da52a9eb578.jpg?v=1781129956"},{"product_id":"kn-77-2616kc-cold-air-intake-f150-50l-v8-2021-2024","title":"K\u0026N 77-Series Metal Cold Air Intake for 2021-2024 Ford F-150 5.0L V8","description":"\u003cp\u003eThe K\u0026amp;N 77-2616KC is a 77-Series metal high-flow cold air intake for the 2021-2024 Ford F-150 5.0L V8 with a mandrel-bent aluminum tube and a washable conical filter.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ford F-150 (2021-2024). Fits the 5.0L V8 only — not the EcoBoost, PowerBoost, or Raptor. CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThe 77-2616KC is the 77-series metal-tube intake; the 30-2616KC and 63-2616 are the AirCharger alternatives for the same 5.0L truck.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53236712374569,"sku":"77-2616KC","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_66ac394f-f8b3-4bb2-a5bc-7a3d07675f28.jpg?v=1781129962"},{"product_id":"afe-momentum-gt-pro-dry-s-cold-air-intake-f150-35l-ecoboost-50-70072d","title":"aFe Momentum GT Cold Air Intake 2021-2025 Ford F-150 3.5L EcoBoost","description":"\u003cp\u003eWake up your 2021-2025 Ford F-150 3.5L EcoBoost with the aFe Momentum GT Pro DRY S cold air intake. It ditches the restrictive factory airbox for a sealed, one-piece roto-molded housing and a high-flow washable filter, freeing up airflow for more horsepower, torque and throttle response.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases airflow over the restrictive OE airbox for added horsepower and torque\u003c\/li\u003e\n\u003cli\u003eSealed one-piece housing isolates the filter from hot engine bay air\u003c\/li\u003e\n\u003cli\u003eWashable, reusable Pro DRY S synthetic filter requires no oiling\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and a more aggressive intake sound\u003c\/li\u003e\n\u003cli\u003eBolt-on installation in about an hour with no tune required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePro DRY S high-flow air filter\u003c\/li\u003e\n\u003cli\u003eSealed one-piece intake housing\u003c\/li\u003e\n\u003cli\u003eRoto-molded intake tube\u003c\/li\u003e\n\u003cli\u003eCoupling and T-bolt clamps, mounting plate and installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2021-2025 Ford F-150 with the 3.5L EcoBoost twin-turbo V6, including Raptor (3.5L HO). Does NOT fit the 3.5L PowerBoost hybrid (use aFe 50-70099D) or the 2.7L EcoBoost, 5.0L V8 or Lightning EV.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2025 Ford F-150 V6-3.5L EcoBoost (twin-turbo)\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236750680361,"sku":"50-70072D","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_28bb73ba-a830-49a1-9fe9-d0551713c076.jpg?v=1781130090"},{"product_id":"afe-rapid-induction-pro-dry-s-cold-air-intake-f150-5-0l-52-10012d","title":"aFe Rapid Induction Pro DRY S Cold Air Intake 21-25 Ford F-150 5.0L","description":"\u003cp\u003eWake up your Ford F-150's 5.0L V8 with the aFe Rapid Induction Cold Air Intake System. Engineered with a sealed heat shield and a high-flow oil-free filter, it pulls in cooler, denser air for added horsepower, torque, and throttle response over the restrictive factory airbox.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases horsepower and torque over the stock intake\u003c\/li\u003e\n\u003cli\u003eImproves throttle response and engine sound\u003c\/li\u003e\n\u003cli\u003eOil-free Pro DRY S media is 100% washable and reusable\u003c\/li\u003e\n\u003cli\u003eSealed heat shield blocks hot engine-bay air\u003c\/li\u003e\n\u003cli\u003eNo tuning required and installs in about an hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Pro DRY S air filter\u003c\/li\u003e\n\u003cli\u003eOne molded intake tube\u003c\/li\u003e\n\u003cli\u003eOne powder-coated sheet-metal heat shield housing\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2021-2025 Ford F-150 equipped with the 5.0L V8 engine only. Does not fit EcoBoost, PowerBoost hybrid, or Raptor models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2025 Ford F-150 5.0L V8\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236750844201,"sku":"52-10012D","price":354.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/01_5ae73809-4cba-4f36-96f0-ec2b13191ce4.jpg?v=1781130101"},{"product_id":"afe-momentum-xp-pro-5r-cold-air-intake-2021-2024-ford-f150-raptor-3-5l","title":"aFe Momentum XP Pro 5R Cold Air Intake 21-24 Ford F-150 Raptor","description":"\u003cp\u003eWake up your 2021-2024 Ford F-150 Raptor with the aFe Momentum XP Pro 5R cold air intake. Engineered specifically for the V6-3.5L EcoBoost twin-turbo, it replaces the restrictive factory airbox with a sealed, high-flow induction system that lets your Raptor breathe deeper for stronger throttle response and a more aggressive sound under boost. This Momentum XP intake is not CARB exempt and is not legal for sale or use in California or on emissions-controlled vehicles in CARB states.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutflows the factory intake by 27% for improved airflow on the twin-turbo 3.5L\u003c\/li\u003e\n\u003cli\u003eAdds up to +9 horsepower and +12 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eWashable, reusable Pro 5R filter saves money over disposable elements\u003c\/li\u003e\n\u003cli\u003eSealed one-piece housing isolates the filter from hot engine air\u003c\/li\u003e\n\u003cli\u003eClear sight window lets you inspect the filter without disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMomentum XP sealed intake housing (black XLPE)\u003c\/li\u003e\n\u003cli\u003ePro 5R pre-oiled, washable air filter\u003c\/li\u003e\n\u003cli\u003eMounting hardware and installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2021-2024 Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine only. Does not fit standard F-150 trims (2.7L, 3.5L EcoBoost non-Raptor, 5.0L V8, PowerBoost) or the Raptor R 5.2L V8.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2024 Ford F-150 Raptor - V6-3.5L EcoBoost twin-turbo\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236751171881,"sku":"50-30072R","price":619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0a126461-0c08-4ed3-9d54-81ac2bfc6e9e.jpg?v=1781130115"},{"product_id":"afe-momentum-gt-pro-5r-cold-air-intake-f150-35l-powerboost","title":"aFe Momentum GT Pro 5R Cold Air Intake 21-25 F-150 PowerBoost","description":"\u003cp\u003eWake up your 2021-2025 Ford F-150 3.5L PowerBoost with the aFe Momentum GT Pro 5R cold air intake. It swaps the restrictive factory airbox for a high-flow, sealed system engineered to add power, torque, and throttle response while delivering an aggressive intake sound.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds horsepower and torque over the restrictive factory intake\u003c\/li\u003e\n\u003cli\u003eSealed one-piece housing keeps out hot engine-bay air for cooler, denser intake charge\u003c\/li\u003e\n\u003cli\u003eLarge oiled Pro 5R cotton-gauze filter maximizes airflow and is washable and reusable\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and a deeper, more aggressive intake tone\u003c\/li\u003e\n\u003cli\u003eDirect bolt-in fit using factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) aFe Momentum GT cold air intake unit with integrated sealed housing and Pro 5R oiled filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the 3.5L PowerBoost hybrid V6. Does not fit EcoBoost or 5.0L V8 models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2025 Ford F-150 3.5L PowerBoost (hybrid V6)\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236754284841,"sku":"50-70099R","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_031a225b-663d-46d3-91a8-b5ccafc03055.jpg?v=1781130212"},{"product_id":"kn-77-2617kc-cold-air-intake-ford-f150-35l-ecoboost","title":"K\u0026N 77-Series Cold Air Intake for 15-26 Ford F-150 3.5L EcoBoost","description":"\u003cp\u003eThe K\u0026amp;N 77-2617KC is a 77-Series performance cold air intake for the 2015-2026 Ford F-150 3.5L EcoBoost (including Raptor) with a mandrel-bent aluminum tube and a high-flow cotton-gauze filter.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ford F-150 (2015-2026). Fits the 3.5L EcoBoost only — not the 5.0L V8 or 2.7L EcoBoost. CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThe 77-2617KC is the 77-series metal-tube intake for the 3.5L EcoBoost; the 63-2599 is the 63-series AirCharger alternative.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53236788625705,"sku":"77-2617KC","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_6d24ddca-6385-4aa7-956c-4091f53619a3.jpg?v=1781130316"},{"product_id":"kn-30-2616kc-aircharger-cold-air-intake-ford-f150-5-0l","title":"K\u0026N AirCharger Cold Air Intake for 21-25 Ford F-150 5.0L V8","description":"\u003cp\u003eThe K\u0026amp;N 30-2616KC is an AirCharger performance cold air intake system for the 2021-2025 Ford F-150 5.0L V8 that increases airflow over the restrictive factory intake for more power and a stronger sound.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ford F-150 (2021-2025). Fits the 5.0L V8 only — not the 2.7L or 3.5L EcoBoost or PowerBoost hybrid. CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eK\u0026amp;N offers three intakes for the 2021+ F-150 5.0L: the 30-2616KC AirCharger, the 63-2616 63-series AirCharger with a front-grille scoop, and the 77-2616KC 77-series metal intake. Choose by tube material and budget.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53236788855081,"sku":"30-2616KC","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_732f05e2-8e66-4d0f-ac92-a33ce12ae982.jpg?v=1781130322"},{"product_id":"afe-quantum-pro-dry-s-cold-air-intake-ford-f150-ecoboost-53-10033d","title":"aFe Quantum Pro DRY S Cold Air Intake 15-24 Ford F-150 EcoBoost","description":"\u003cp\u003eWake up your EcoBoost with the aFe Quantum Cold Air Intake System. Engineered for the 2015-2024 Ford F-150 with the 2.7L or 3.5L EcoBoost V6, it replaces the restrictive factory airbox with a high-flow, sealed system that feeds your turbos cooler, denser air for stronger throttle response and more power.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven gains of up to +10 horsepower and +15 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eMeasured airflow of 575 CFM, outflowing the factory intake by 28%\u003c\/li\u003e\n\u003cli\u003eSealed roto-molded housing isolates the filter from hot engine-bay air\u003c\/li\u003e\n\u003cli\u003eWashable, reusable Pro DRY S filter media never needs oiling\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fit using factory mounting points, no cutting required\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and a deeper intake tone under boost\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoto-molded intake housing with integrated filter interface\u003c\/li\u003e\n\u003cli\u003ePro DRY S air filter with captive screws\u003c\/li\u003e\n\u003cli\u003eAir scoop assembly\u003c\/li\u003e\n\u003cli\u003eDyno-tuned XLPE intake tube\u003c\/li\u003e\n\u003cli\u003eSilicone bellows couplings and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2015-2024 Ford F-150 with the 2.7L (twin-turbo) or 3.5L (twin-turbo) EcoBoost V6, including 2017-2024 Raptor models with the 3.5L EcoBoost. This intake will NOT fit the 3.5L PowerBoost hybrid, the 5.0L V8, or any non-EcoBoost engine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015-2024 Ford F-150 - 2.7L EcoBoost V6\u003c\/li\u003e\n\u003cli\u003e2015-2024 Ford F-150 - 3.5L EcoBoost V6 (incl. Raptor 2017-2024)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53236789117225,"sku":"53-10033D","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/01_d2688c58-2b78-4cbb-b605-837c4ed0f741.jpg?v=1781130332"},{"product_id":"afe-50-70109r-momentum-gt-cold-air-intake-bronco-raptor","title":"aFe Momentum GT Cold Air Intake Pro 5R for 2022-2025 Bronco Raptor","description":"\u003cp\u003eUnlock more power and response from your 2022-2025 Ford Bronco Raptor 3.0L EcoBoost with the aFe Momentum GT cold air intake system with Pro 5R filter (50-70109R). This sealed performance intake is engineered to outflow the factory system and deliver dyno-proven horsepower and torque gains while using a washable, reusable cotton gauze filter.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased power and torque\u003c\/strong\u003e - Dyno-tested gains of up to approximately +6 horsepower and +10 lb-ft of torque, giving your Bronco Raptor stronger acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter airflow than stock\u003c\/strong\u003e - Momentum GT design outflows the factory intake by up to 18%, with measured flow around 385–390 CFM at 7\" H2O to feed the 3.0L twin-turbo EcoBoost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashable Pro 5R air filter\u003c\/strong\u003e - Five-layer oiled cotton gauze filter provides high flow and excellent filtration and can be washed and reused for long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed, efficient intake housing\u003c\/strong\u003e - Sealed Momentum GT airbox helps shield the filter from engine heat, promoting cooler, denser intake air for more consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable XLPE construction\u003c\/strong\u003e - Cross-linked polyethylene intake tubes and housing are designed to resist heat soak and withstand harsh off-road conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized, dyno-tuned design\u003c\/strong\u003e - High quality, computer-designed, dyno-tuned intake tubes maintain a precise fit while maximizing airflow and throttle response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eaFe Momentum GT cold air intake assembly with Pro 5R washable air filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2025 Ford Bronco Raptor 3.0L EcoBoost\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238648045865,"sku":"50-70109R","price":556.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_4f7558d1-dec6-44ca-b416-05b725f414f1.jpg?v=1781130575"},{"product_id":"afe-54-13078r-magnum-force-stage-2-pro-5r-intake-jeep","title":"aFe Magnum FORCE Stage-2 Pro 5R Intake for 18-23 Wrangler JL","description":"\u003cp\u003eUnleash the full potential of your 3.6L Jeep Wrangler JL with the \u003cstrong\u003eaFe Magnum FORCE Stage-2 Cold Air Intake System w\/ Pro 5R Filter (54-13078R)\u003c\/strong\u003e. Engineered for real-world performance, this intake is designed to dramatically improve airflow compared to the restrictive factory airbox, helping your engine breathe deeper and respond faster.\u003c\/p\u003e\n\n\u003cp\u003eAt the core of this system is an \u003cstrong\u003e8-inch tall, 360-degree radial flow performance air filter\u003c\/strong\u003e with a large 4.5-inch flange and aFe's proven \u003cstrong\u003ePro 5R oiled cotton gauze media\u003c\/strong\u003e. The five layers of progressively finer cotton gauze are pre-oiled to deliver excellent filtration while maintaining high airflow, making it ideal for drivers looking for both power and protection.\u003c\/p\u003e\n\n\u003cp\u003eA computer-designed, \u003cstrong\u003eroto-molded intake tube\u003c\/strong\u003e optimizes airflow from the filter to the throttle body, minimizing turbulence and restriction for smooth, consistent power delivery. This is paired with a lightweight, vacuum-formed plastic cover that helps shield the filter from hot under-hood air, reducing intake temperatures and contributing to improved performance under load.\u003c\/p\u003e\n\n\u003cp\u003eThe Magnum FORCE Stage-2 system includes high-quality \u003cstrong\u003esilicone couplers, clamps, and premium hardware\u003c\/strong\u003e for a secure, leak-free installation. It is designed as a \u003cstrong\u003edirect bolt-on upgrade\u003c\/strong\u003e, requiring no cutting or drilling of OEM components, so you can revert to stock at any time if needed.\u003c\/p\u003e\n\n\u003cp\u003eKey benefits include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8\" tall 360° radial flow Pro 5R oiled cotton gauze performance filter for maximum airflow and filtration\u003c\/li\u003e\n  \u003cli\u003eRoto-molded intake tube engineered for smooth, high-volume air delivery\u003c\/li\u003e\n  \u003cli\u003eLightweight protective cover helps reduce intake noise and shields the filter from engine heat\u003c\/li\u003e\n  \u003cli\u003ePremium clamps and silicone couplers included for a durable, reliable seal\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on design for straightforward installation using common hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis aFe Magnum FORCE Stage-2 Cold Air Intake System is an excellent choice for Wrangler JL owners who want a noticeable increase in intake sound, improved throttle response, and a performance-focused intake solution from a trusted brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant fitment:\u003c\/strong\u003e This part is specific to \u003cstrong\u003e3.6L\u003c\/strong\u003e models. Please verify your exact trim, engine and bed before ordering.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238651552041,"sku":"54-13078R","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_5a40a2af-db76-4a56-afeb-c02704bc51d8.jpg?v=1781130615"},{"product_id":"afe-50-70062d-cold-air-intake-wrangler-jl-gladiator-jt","title":"aFe Cold Air Intake Pro DRY S for 2020-2021 Jeep Wrangler JL","description":"\u003cp\u003eThe aFe 50-70062D Momentum HD Cold Air Intake System with Pro DRY S Filter is a direct-fit intake upgrade for supported 3.0L EcoDiesel Jeep applications. It is designed to replace the restrictive factory air intake path and support improved airflow in 2020-2023 Jeep Wrangler JL and 2021-2023 Jeep Gladiator JT models. This intake is not CARB exempt and is not legal for sale or use in California or on emissions-controlled vehicles in CARB states.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-flow intake design\u003c\/strong\u003e - Built to improve airflow for 3.0L EcoDiesel Jeep applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e - Engineered for the listed Wrangler JL and Gladiator JT fitments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro DRY S media\u003c\/strong\u003e - Uses a dry filter media design for convenient serviceability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMomentum HD platform\u003c\/strong\u003e - Sealed XLPE housing and dyno-tuned tube; flows about 23% more air than the factory intake.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2020-2023 Jeep Wrangler JL (3.0L EcoDiesel)\u003c\/li\u003e\n\u003cli\u003e2021-2023 Jeep Gladiator JT (3.0L EcoDiesel)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238652928297,"sku":"50-70062D","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_c91bdf72-4a45-4942-8970-5d121aa59384.jpg?v=1781130620"},{"product_id":"mishimoto-mmb-br27-21dw-bronco-intake-snorkel","title":"Mishimoto Bronco Intake \u0026 Snorkel Dry Filter for 2021-2021","description":"\u003cp\u003eThe Mishimoto MMB-BR27-21DW is a performance cold air intake and snorkel bundle for the 2021-2025 Ford Bronco 2.7L EcoBoost V6. This Borne Off-Road system pairs a high-flow intake with a roof-level snorkel and a dry washable filter to deliver cooler, cleaner air and improved breathing on-road and off-road.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooler, cleaner intake air\u003c\/strong\u003e - the snorkel raises the fresh-air inlet to roof level to help avoid dust, debris, and water on the trail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved airflow over stock\u003c\/strong\u003e - Mishimoto rates the intake at 39.6% less restrictive than the factory intake, with dyno-proven gains of 7.5 hp and 7.4 lb-ft on a stock tune.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable rotomolded construction\u003c\/strong\u003e - the cross-linked polyethylene intake tube is UV-resistant and helps reduce heat soak compared with metal tubes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance filtration\u003c\/strong\u003e - the dry washable filter can be cleaned and reused without oiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine-specific fit\u003c\/strong\u003e - designed for the 2.7L EcoBoost Bronco for a clean, integrated install.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSnorkel system (tube, fender tube, inlet, and mounting brackets)\u003c\/li\u003e\n\u003cli\u003ePerformance intake airbox with 4.5-inch high-flow dry washable filter\u003c\/li\u003e\n\u003cli\u003eAdapter hardware, gaskets, and mounting hardware\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit for the 2021-2025 Ford Bronco with the 2.7L EcoBoost V6. It does not fit the 2.3L four-cylinder Bronco or the unibody Bronco Sport. Verify your engine before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021-2025 Ford Bronco (2.7L EcoBoost V6)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCalifornia Emissions\u003c\/h3\u003e\u003cp\u003eThis performance intake and snorkel does not carry a CARB Executive Order and is intended for off-road or competition use. It is not legal for sale or use on pollution-controlled vehicles in California or other CARB-compliant states.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53238655058217,"sku":"MMB-BR27-21DW","price":1023.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e0917064-0fe1-4562-a0f5-a6aeeb29bd6c.jpg?v=1781130638"},{"product_id":"afe-super-stock-intake-55-10014r-ram-1500-trx","title":"aFe Super Stock Intake w\/ Pro 5R for 21-23 Ram 1500 TRX","description":"\u003cp\u003eThe aFe Super Stock Induction System 55-10014R is a direct-fit upgrade for your 2021-2024 Ram 1500 TRX 6.2L (supercharged) Mopar Gen III Hemi. This complete air induction kit replaces the factory setup with a high-flow system featuring a reusable oiled Pro 5R filter to help your TRX breathe easier and respond faster.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced airflow for your TRX\u003c\/strong\u003e - Super Stock design and high-flow Pro 5R oiled filter improve induction efficiency compared to the restrictive factory air path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable, washable filtration\u003c\/strong\u003e - Washable blue Pro 5R oiled filter can be cleaned and reused, reducing the need for frequent replacement filters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable plastic intake tube\u003c\/strong\u003e - Black plastic tube and components are built to handle under-hood temperatures while maintaining a clean, OEM-like appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit kit for 6.2L TRX\u003c\/strong\u003e - Engineered for the Ram 1500 TRX V8 6.2L (sc) platform, with components tailored to the Mopar Gen III Hemi layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete induction upgrade\u003c\/strong\u003e - Supplied as a kit to replace the stock induction system, giving you a matched intake solution from aFe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuper Stock air induction system kit with reusable oiled filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2024 Ram 1500 TRX V8 6.2L (supercharged) (air induction system)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant fitment:\u003c\/strong\u003e This part is specific to \u003cstrong\u003e6.2L\u003c\/strong\u003e models. Please verify your exact trim, engine and bed before ordering.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238656663849,"sku":"55-10014R","price":354.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0d9e35e5-043c-48a2-93a8-bc02027e3f71.jpg?v=1787864169"},{"product_id":"afe-50-70079r-momentum-gt-pro-5r-intake-bronco-sport-2-0l","title":"aFe Momentum GT Pro 5R Intake for 2021-24 Bronco Sport 2.0L","description":"\u003cp\u003eGive your Ford 2.0L turbo the airflow it deserves with the \u003cstrong\u003eaFe Momentum GT Cold Air Intake System (50-70079R)\u003c\/strong\u003e. Engineered specifically for late-model Ford crossovers, this intake combines a high-flow filter, sealed housing and dyno-tuned tube to deliver real-world gains in performance, drivability and sound.\u003c\/p\u003e\n\n\u003cp\u003eThe heart of this system is a large, 360-degree \u003cstrong\u003epre-oiled Pro 5R radial-flow cotton gauze filter\u003c\/strong\u003e. With five layers of progressively finer media, it flows significantly more air than the factory element while still providing excellent filtration, making it ideal for street and spirited driving. The inverted top design increases surface area, extending service intervals so you spend more time driving and less time on maintenance.\u003c\/p\u003e\n\n\u003cp\u003eaFe houses the filter in a \u003cstrong\u003eone-piece, sealed XLPE (cross-linked polyethylene) airbox\u003c\/strong\u003e that helps shield the intake charge from under-hood heat for more consistent performance. The integrated clear sight window lets you visually inspect the filter without disassembly, adding both convenience and a custom look under the hood.\u003c\/p\u003e\n\n\u003cp\u003eA computer-designed, \u003cstrong\u003edyno-tuned intake tube\u003c\/strong\u003e connects the airbox to the turbo inlet, maintaining smooth airflow and proper MAF sensor placement for optimal power gains and fitment. XLPE construction resists heat soak and is extremely durable, making it well-suited for daily use and weekend adventures alike.\u003c\/p\u003e\n\n\u003cp\u003eTo complete the package, aFe includes \u003cstrong\u003estainless steel clamps\u003c\/strong\u003e and \u003cstrong\u003epremium silicone couplers\u003c\/strong\u003e for a secure, leak-free installation. The Momentum GT design uses fewer parts than traditional intake systems, helping ensure a straightforward bolt-on install with common hand tools. According to manufacturer data, this system outflows the factory intake and is capable of measurable improvements in horsepower, torque and intake sound on the 2.0L turbo platform.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for the 2021-2024 Ford Bronco Sport and 2020-2022 Ford Escape with the 2.0L EcoBoost turbo engine.\u003c\/li\u003e\n\u003cli\u003ePre-oiled Pro 5R blue cotton gauze filter for maximum airflow and performance.\u003c\/li\u003e\n\u003cli\u003eSealed, heat-resistant XLPE airbox with integrated clear sight window.\u003c\/li\u003e\n\u003cli\u003eHigh-quality, dyno-tuned intake tube engineered for power and perfect fit.\u003c\/li\u003e\n\u003cli\u003eStainless clamps and silicone couplers included for a clean, secure install.\u003c\/li\u003e\n\u003cli\u003eDesigned as a direct bolt-on upgrade; no cutting or tuning required in typical applications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238659350825,"sku":"50-70079R","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_3bd07309-ebdd-42cc-8984-1e10c09929b4.jpg?v=1781130684"},{"product_id":"afe-46-35001-throttle-body-spacer-jeep-wrangler","title":"aFe Throttle Body Spacer 46-35001 for Jeep Wrangler","description":"\u003cp\u003eThe aFe POWER Silver Bullet throttle body spacer is a performance intake upgrade designed to improve airflow, throttle response, and overall engine responsiveness. Its serrated\/helix entry design helps create turbulence before air enters the engine, which aFe states can improve horsepower, torque, and throttle response.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved throttle response\u003c\/strong\u003e - The serrated\/helix design is engineered to increase intake air speed and create a more efficient airflow path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e - Made from 6061-T6 billet aluminum for strength, light weight, and precise fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced whistle noise\u003c\/strong\u003e - The Silver Bullet design is intended to reduce the whistle commonly associated with helix-only spacers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits with aFe intakes\u003c\/strong\u003e - Documentation states compatibility with aFe intake systems for straightforward integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThrottle body spacer\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1991-2006 Jeep Wrangler YJ \/ TJ (4.0L)\u003c\/li\u003e\n\u003cli\u003e1991-2001 Jeep Cherokee XJ (4.0L)\u003c\/li\u003e\n\u003cli\u003e1999-2004 Jeep Grand Cherokee (4.0L)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238659940649,"sku":"46-35001","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_d7b283e5-8145-4596-a347-c346b40519ff.jpg?v=1781130696"},{"product_id":"afe-50-70070t-momentum-hd-pro-10r-cold-air-intake-ram-1500","title":"aFe Momentum HD Pro 10R Cold Air Intake for 2020-2021 Ram 1500","description":"\u003cp\u003eLet your 2020-2023 Ram 1500 3.0L EcoDiesel breathe the way it should with the \u003cstrong\u003eaFe Momentum HD Cold Air Intake System w\/ Pro 10R Filter (50-70070T)\u003c\/strong\u003e. This performance intake is engineered specifically for the EcoDiesel platform to move more cool, clean air into your engine for improved response, power potential, and a deeper diesel tone.\u003c\/p\u003e\n\n\u003cp\u003eThe Momentum HD series is built around a \u003cstrong\u003esealed one-piece housing\u003c\/strong\u003e that helps keep hot under-hood air away from the intake charge, delivering cooler, denser air to your turbo for reliable performance in daily driving, towing, and off-road conditions. By eliminating multi-piece housings, the design improves airflow and reduces potential leak points while keeping installation simple.\u003c\/p\u003e\n\n\u003cp\u003eAt the heart of this system is a \u003cstrong\u003ehigh-flow Pro 10R performance air filter\u003c\/strong\u003e. The large, 360-degree radial-flow filter uses progressive cotton media to maximize surface area and airflow while maintaining excellent filtration for long engine life. Momentum’s innovative filter-to-housing interface is designed to accommodate the largest possible filter, increasing available air volume and further reducing restriction.\u003c\/p\u003e\n\n\u003cp\u003eThis intake includes \u003cstrong\u003eprecision-designed, dyno-tuned intake tubes\u003c\/strong\u003e that optimize airflow from the filter to the turbo inlets for efficient, smooth flow. The computer-designed tube geometry promotes power and torque gains over the restrictive factory air tract, especially under load and at higher RPM.\u003c\/p\u003e\n\n\u003cp\u003eaFe equips the Momentum HD line with \u003cstrong\u003epremium hardware\u003c\/strong\u003e, including robust clamps and quality couplers, for a secure, long-lasting installation that stands up to heat, vibration, and harsh driving conditions. The system is designed as a true \u003cstrong\u003ebolt-on upgrade\u003c\/strong\u003e that uses factory mounting points and typically requires no tuning or permanent modifications to the vehicle for installation.\u003c\/p\u003e\n\n\u003cp\u003eIf you want a durable, high-flow intake solution for your 2020-2023 Ram 1500 3.0L EcoDiesel, the aFe Momentum HD 50-70070T delivers the sealed housing, oversized Pro 10R filtration, and tuned intake tubing you need for improved airflow, sharper throttle response, and a more engaging diesel sound. This intake is not CARB exempt and is not legal for sale or use in California or on emissions-controlled vehicles in CARB states.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 2020-2023 Ram 1500 3.0L EcoDiesel applications\u003c\/li\u003e\n  \u003cli\u003eSealed Momentum HD housing helps deliver cool, dense intake air\u003c\/li\u003e\n  \u003cli\u003eLarge Pro 10R performance filter for maximum airflow and filtration\u003c\/li\u003e\n  \u003cli\u003eComputer-designed, dyno-tuned intake tubes for optimized flow and fit\u003c\/li\u003e\n  \u003cli\u003ePremium hardware and couplers for durable, secure installation\u003c\/li\u003e\n  \u003cli\u003eBolt-on design that typically installs using factory mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238664167721,"sku":"50-70070T","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1d432644-d42f-44b1-91fe-c3d0925e2a3a.jpg?v=1781130742"},{"product_id":"afe-77-46211-scorcher-gt-power-module","title":"aFe Scorcher GT Power Module for 23-25 Jeep Wagoneer","description":"\u003cp\u003eThe aFe 77-46211 Scorcher GT Power Module is an inline performance tuner engineered for late-model Jeep Wagoneer and Ram 1500 trucks equipped with the L6 3.0L twin-turbo engine. This plug-and-play module intercepts key sensor signals to deliver dyno-proven horsepower and torque gains, with multiple power settings so you can match performance to your driving style.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDyno-proven power gains\u003c\/strong\u003e - Engineered to add significant horsepower and torque on the 3.0L twin-turbo platform, improving acceleration and on-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour power position settings\u003c\/strong\u003e - Choose from multiple power levels to fine-tune response for daily driving, towing, or maximum performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy plug-and-play install\u003c\/strong\u003e - Inline module design connects to factory-style harnesses for a quick installation with no permanent modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized for aFe upgrades\u003c\/strong\u003e - Calibrated to work great on stock vehicles and further optimized when paired with aFe POWER intake and exhaust components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible performance upgrade\u003c\/strong\u003e - Module can be removed to return the vehicle to stock tune, ideal for leased vehicles or future resale.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2023-2024 Jeep Wagoneer L6 3.0L twin-turbo (plug-and-play module)\u003c\/li\u003e\n\u003cli\u003e2025 Ram 1500 L6 3.0L twin-turbo (plug-and-play module)\u003c\/li\u003e\n\u003cli\u003e2025 Ram 1500 RHO L6 3.0L twin-turbo (plug-and-play module)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis Scorcher GT Power Module is designed specifically for the 3.0L twin-turbo inline-six in the Jeep Wagoneer and Ram 1500\/1500 RHO applications listed above. Always verify engine and model details before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant fitment:\u003c\/strong\u003e This part is specific to \u003cstrong\u003e3.0L\u003c\/strong\u003e models. Please verify your exact trim, engine and bed before ordering.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238665117993,"sku":"77-46211","price":462.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f47acbb1-da5a-4a54-88f0-39366e5b3e62.jpg?v=1781130773"},{"product_id":"afe-10-10401r-magnum-flow-pro-5r-air-filter-ford-bronco","title":"aFe Magnum FLOW Pro 5R Air Filter for 2021-2022 Ford Bronco","description":"\u003cp\u003eThe aFe Magnum FLOW Pro 5R air filter 10-10401R is a direct-fit upgrade for your 2021-2024 Ford Bronco EcoBoost, delivering increased airflow and reusable performance in place of the factory paper element. Its Pro 5R oiled cotton\/synthetic media is engineered for enthusiasts who want better breathing and long service life from a drop-in panel filter.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved airflow\u003c\/strong\u003e - High-flow Magnum FLOW Pro 5R media is designed to outflow restrictive factory paper filters for your Bronco's EcoBoost engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance-oriented filtration\u003c\/strong\u003e - Five layers of pre-oiled cotton gauze media balance airflow and filtration to support horsepower and throttle response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashable and reusable\u003c\/strong\u003e - Reusable construction lets you clean and re-oil the filter for multiple service cycles instead of replacing throwaway elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit installation\u003c\/strong\u003e - Engineered as a direct-fit air filter for the OEM airbox, so installation is a simple swap with no cutting or modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e - Cotton\/synthetic filter element and robust Pro 5R design are built to handle daily driving and spirited use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2024 Ford Bronco EcoBoost L4 2.3L (t)\u003c\/li\u003e\n\u003cli\u003e2021-2024 Ford Bronco EcoBoost V6 2.7L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238700245289,"sku":"10-10401R","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_77c70193-e777-4b67-b731-b63c7c4e0b1f.jpg?v=1787861856"},{"product_id":"afe-54-13058r-magnum-force-stage-2-pro-5r-intake-silverado-sierra-5-3l","title":"aFe Magnum FORCE Stage-2 Pro 5R Intake for 2019-2020 Silverado 1500","description":"\u003cp\u003eThe \u003cstrong\u003eaFe Magnum FORCE Stage-2 Cold Air Intake System w\/ Pro 5R Filter (54-13058R)\u003c\/strong\u003e is a direct bolt-on intake for the 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 with the 5.3L V8. It replaces the restrictive factory airbox and tubing with a free-flowing, dyno-tuned intake that lets the naturally aspirated 5.3L breathe deeper and respond faster.\u003c\/p\u003e\n\n\u003cp\u003eThe heart of this kit is a \u003cstrong\u003ehigh quality, computer-designed, dyno-tuned intake tube\u003c\/strong\u003e engineered to deliver maximum power gains while maintaining a precise OEM-style fit. The smooth, optimized tube route reduces turbulence and restrictions so more cool, dense air reaches the cylinders for stronger combustion and improved efficiency.\u003c\/p\u003e\n\n\u003cp\u003eFeeding that tube is a large, high-flow \u003cstrong\u003ePro 5R oiled performance air filter\u003c\/strong\u003e. This multi-layer, washable and reusable filter is built for maximum airflow and excellent filtration, allowing you to support increased power levels while protecting your engine from harmful contaminants. When it gets dirty, simply clean and re-oil instead of constantly replacing disposable filters.\u003c\/p\u003e\n\n\u003cp\u003eThe intake tube and housing are constructed from durable \u003cstrong\u003eXLPE (cross-linked polyethylene)\u003c\/strong\u003e, a material chosen for its strength and superior heat resistance. XLPE helps insulate the incoming air charge from underhood heat, preserving cooler temperatures that your engine can turn into added power and more consistent performance.\u003c\/p\u003e\n\n\u003cp\u003eThis Magnum FORCE Stage-2 system is engineered around factory mounting points for a \u003cstrong\u003eclean, secure installation\u003c\/strong\u003e with no cutting or permanent modifications required. Brackets, couplers, and clamps are included for a straightforward, garage-friendly install using basic hand tools. The design works seamlessly with your vehicle's factory sensors and electronics for trouble-free operation.\u003c\/p\u003e\n\n\u003cp\u003eOnce installed, drivers can expect a noticeable improvement in \u003cstrong\u003ethrottle response, mid-range pull, and overall drivability\u003c\/strong\u003e, along with a deeper, more aggressive intake and turbo sound under acceleration. At cruising speeds, the system remains composed for comfortable everyday driving, making it an ideal upgrade for both street use and towing duty.\u003c\/p\u003e\n\n\u003cp\u003eIf you're looking to free up horsepower, sharpen response, and prepare your build for future tuning or bolt-ons, the aFe Magnum FORCE Stage-2 Cold Air Intake 54-13058R delivers proven results with OEM-level fit and finish. Pair it with other exhaust or tuning upgrades to maximize your performance gains.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2019-2020 Chevrolet Silverado 1500 and 2019-2020 GMC Sierra 1500 equipped with the 5.3L V8. Does not fit the 4.3L V6, 6.2L V8, or 3.0L Duramax diesel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2019-2020 Chevrolet Silverado 1500 5.3L V8\u003c\/li\u003e\n\u003cli\u003e2019-2020 GMC Sierra 1500 5.3L V8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238700376361,"sku":"54-13058R","price":387.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_813457ac-f65b-4717-96c0-675b320b8576.jpg?v=1781130814"},{"product_id":"afe-momentum-gt-cold-air-intake-50-70081d-2021-bronco-2-7l","title":"aFe Momentum GT Cold Air Intake Pro DRY S for 2021 Bronco","description":"\u003cp\u003eUnlock more performance from your 2021 Ford Bronco 2.7L twin-turbo with the aFe Momentum GT cold air intake system featuring the Pro DRY S filter. This sealed intake is designed to improve airflow, maintain excellent filtration, and deliver a clean, OE-style fit under the hood of your Bronco.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved airflow for your 2.7L Bronco\u003c\/strong\u003e - Momentum GT intake geometry is engineered to deliver smoother, less restrictive airflow to your twin-turbo V6 for stronger performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-maintenance Pro DRY S filter\u003c\/strong\u003e - Three-layer, oil-free synthetic media can be washed and reused, eliminating the need for filter oil while maintaining high filtration efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooler, sealed intake design\u003c\/strong\u003e - Enclosed airbox helps isolate the filter from hot engine bay air, supporting more consistent performance on-road and off-road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable cross-linked polyethylene construction\u003c\/strong\u003e - Heat-resistant intake tube and airbox are built to handle under-hood temperatures and rugged driving conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick visual filter inspection\u003c\/strong\u003e - Large clear sight window on the Momentum GT housing lets you check filter condition at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific fitment\u003c\/strong\u003e - Designed around the 2021 Ford Bronco 2.7L V6 twin-turbo engine bay for a clean installation and secure mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2021 Ford Bronco V6 2.7L twin-turbo (intake system)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant fitment:\u003c\/strong\u003e This part is specific to \u003cstrong\u003e2.7L\u003c\/strong\u003e models. Please verify your exact trim, engine and bed before ordering.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238701916457,"sku":"50-70081D","price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_f1040ce4-b603-4741-befb-b831ab5075c4.jpg?v=1781130867"},{"product_id":"kn-aircharger-cold-air-intake-jeep-wrangler-jl-2-0l-63-1580","title":"K\u0026N AirCharger Cold Air Intake for 18-23 Jeep Wrangler JL 2.0L","description":"\u003cp\u003eThe K\u0026amp;N 63-1580 is a 63-series AirCharger cold air intake for the 2018-2023 Jeep Wrangler JL 2.0L turbo with an enclosed air box and roto-molded tube for more airflow.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Jeep Wrangler (2018-2023). Fits the 2.0L turbo only — not the 3.6L V6 or 3.0L EcoDiesel Wrangler. CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThe 63-1580 fits the 2.0L turbo JL; for the 3.6L Pentastar V6 Wrangler and Gladiator, use the K\u0026amp;N 71-1576 Blackhawk intake instead.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53238915727657,"sku":"63-1580","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_ee884abd-93e6-4497-a46d-d5698b0a16f3.jpg?v=1781131021"},{"product_id":"kn-blackhawk-cold-air-intake-jeep-wrangler-jl-gladiator-36l-71-1576","title":"K\u0026N Blackhawk Cold Air Intake for 2018-2025 Jeep Wrangler JL 3.6L","description":"\u003cp\u003eThe K\u0026amp;N 71-1576 is a Blackhawk Induction cold air intake for the 2018-2025 Jeep Wrangler JL and Gladiator JT 3.6L Pentastar V6 with an oil-free DRYFLOW filter and black powder-coated tube.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Jeep Gladiator (2020-2025) and Jeep Wrangler (2018-2025). Fits the 3.6L V6 only — not the 2.0L turbo or 3.0L EcoDiesel Wrangler. CARB emissions status varies by part number and model year; verify the CARB EO for your exact vehicle and year before purchase in California and other CARB states.\u003c\/p\u003e\n\u003cp\u003eThe 71-1576 Blackhawk fits the 3.6L V6 JL and JT; for the 2.0L turbo Wrangler, use the K\u0026amp;N 63-1580 AirCharger instead.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53238916612393,"sku":"71-1576","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_36067820-09f3-46c6-9142-7d791a40351c.jpg?v=1781131057"},{"product_id":"rugged-ridge-amfib-snorkel-ram-inlet-jeep-wrangler-jl-gladiator-jt","title":"Rugged Ridge AmFib Snorkel Ram Inlet for 18-25 Jeep Wrangler JL \u0026","description":"\u003cp\u003eTop off your Rugged Ridge AmFib Snorkel System with the factory-styled AmFib Snorkel Ram Inlet, engineered to pull intake air from high above the engine bay instead of down near the wheels and water line.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCaps the high-mount intake tube to draw cooler, cleaner air from above\u003c\/li\u003e\n\u003cli\u003eHelps keep water and debris out of the intake during shallow water crossings\u003c\/li\u003e\n\u003cli\u003eMolded from UV-resistant thermoplastic that resists fading and cracking\u003c\/li\u003e\n\u003cli\u003eStyled to accent the factory appearance of your Jeep JL or JT\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation with no cutting required\u003c\/li\u003e\n\u003cli\u003eBacked by a Rugged Ridge 5-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAmFib Snorkel Ram Inlet cap\u003c\/li\u003e\n\u003cli\u003e3-inch clamp\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL (2-Door and 4-Door JLU) and 2020-2025 Jeep Gladiator JT. Not compatible with the 6.4L V8 (392) or 3.0L EcoDiesel engines, and left-hand drive only. Requires the Rugged Ridge AmFib Snorkel System to install.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":53238916677929,"sku":"17756.37","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_1521cb3f-fe5b-453b-b58e-4581461d9df7.jpg?v=1781131062"},{"product_id":"afe-momentum-gt-pro-guard-7-cold-air-intake-jeep-wrangler-jl-gladiator-jt-36l-75-76217","title":"aFe Momentum GT Pro-GUARD 7 Cold Air Intake 18-25 Jeep Wrangler JL","description":"\u003cp\u003eWake up the 3.6L Pentastar in your Jeep Wrangler JL or Gladiator JT with the aFe Momentum GT Pro-GUARD 7 Cold Air Intake System. It swaps the restrictive factory airbox for a high-flow sealed enclosure and a heavy-duty oiled filter, freeing up airflow while protecting the engine from heat and trail debris.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases airflow over the restrictive factory intake for crisper throttle response\u003c\/li\u003e\n\u003cli\u003eSealed roto-molded housing isolates the filter from hot engine-bay air\u003c\/li\u003e\n\u003cli\u003eRetains the factory water-fording height so your trail capability is unchanged\u003c\/li\u003e\n\u003cli\u003ePro-GUARD 7 oiled media offers heavy-duty filtration for dusty off-road use\u003c\/li\u003e\n\u003cli\u003eWashable and reusable filter for long service life and lower running cost\u003c\/li\u003e\n\u003cli\u003eBolt-on install to factory locations with no vehicle modifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe Momentum GT roto-molded intake housing with sight window\u003c\/li\u003e\n\u003cli\u003ePro-GUARD 7 pre-oiled performance air filter\u003c\/li\u003e\n\u003cli\u003eMounting hardware and installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2018-2025 Jeep Wrangler JL (2-Door and 4-Door Unlimited) and 2020-2025 Jeep Gladiator JT, equipped with the 3.6L V6 Pentastar gasoline engine. Does not fit 2.0L turbo, 3.0L EcoDiesel, or 6.4L 392 engines.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53238916776233,"sku":"75-76217","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_9aa48c93-8243-451e-acba-60048a47b28a.jpg?v=1781131084"},{"product_id":"kn-blackhawk-71-2591-air-intake-f150-5-0l-2015-2020","title":"K\u0026N Blackhawk 5.0L Air Intake for 2015-2020 Ford F-150","description":"\u003cp\u003eThe K\u0026amp;N 71-2591 is a Blackhawk Induction cold air intake for the 2015-2020 Ford F-150 5.0L Coyote V8 with a black powder-coated aluminum tube and a washable, reusable filter.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eSold as a complete air intake system with the filter, tube, heat shield, and mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ford F-150 (2015-2020). Fits the 5.0L V8 only — not the 2.7L or 3.5L EcoBoost F-150. CARB status is model-year specific: it carries CARB EO D-269-46 and is 50-state legal on the 2015 model year, but it is NOT CARB-exempt on 2016-2020 trucks, where it is off-road\/49-state only and not legal in California.\u003c\/p\u003e\n\u003cp\u003eThe 71-2591 is the 13th-gen (2015-2020) intake; for the 2021+ F-150 5.0L, use the K\u0026amp;N 30-2616KC, 63-2616, or 77-2616KC.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53249760198953,"sku":"71-2591","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_55f676d3-9d54-46e2-814f-58adfb432302.jpg?v=1781229173"},{"product_id":"airaid-mxp-cold-air-intake-oiled-f150-5-0l-2015-2020-400-293","title":"Airaid MXP Cold Air Intake Oiled 5.0L V8 for 2015-2020 Ford F-150","description":"\u003cp\u003eThe Airaid MXP Series Cold Air Intake (MPN 400-293) is a bolt-on cold air intake with a reusable oiled SynthaFlow filter for the 2015-2020 Ford F-150 5.0L V8 (Coyote).\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreases airflow over the restrictive factory intake system\u003c\/li\u003e\n\u003cli\u003eImproves throttle response and underhood intake sound\u003c\/li\u003e\n\u003cli\u003eSealed one-piece roto-molded airbox isolates the filter from hot engine air\u003c\/li\u003e\n\u003cli\u003eReusable, washable oiled SynthaFlow cotton filter for long service life\u003c\/li\u003e\n\u003cli\u003eNo tuning or computer recalibration required\u003c\/li\u003e\n\u003cli\u003e50-state emissions legal under a CARB Executive Order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne-piece roto-molded intake airbox\u003c\/li\u003e\n\u003cli\u003eHigh-density polyethylene intake tube\u003c\/li\u003e\n\u003cli\u003eOiled SynthaFlow cotton\/synthetic air filter\u003c\/li\u003e\n\u003cli\u003eMounting hardware and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the 2015-2020 Ford F-150 equipped with the 5.0L V8 (Coyote) engine. Does not fit EcoBoost or 3.3L\/3.5L V6 engines.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford F-150 5.0L V8\u003c\/li\u003e\u003c\/ul\u003e","brand":"Airaid","offers":[{"title":"Default Title","offer_id":53249760231721,"sku":"400-293","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_fd7bda66-c6a9-48fa-8a2f-eddf6f03e302.jpg?v=1781229178"},{"product_id":"afe-magnum-force-stage-2xp-cold-air-intake-f150-raptor-35l-54-12882-b","title":"aFe Stage-2XP Cold Air Intake 3.5L for 17-20 Ford F-150 Raptor","description":"\u003cp\u003eWake up your 3.5L EcoBoost-powered Ford F-150 Raptor with the aFe Magnum FORCE Stage-2XP Cold Air Intake System. This dual-tube, sealed-airbox intake feeds the twin-turbo V6 more cool, high-velocity air for stronger throttle response and a more aggressive induction sound.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutflows the factory intake by 78% for improved airflow to the twin turbos\u003c\/li\u003e\n\u003cli\u003eDual 3-1\/2 inch mandrel-bent aluminum tubes with an H-pipe balance pressure and maximize velocity\u003c\/li\u003e\n\u003cli\u003eTwo large 7-inch Pro 5R oiled cotton filters with progressive 5-layer mesh media\u003c\/li\u003e\n\u003cli\u003eSealed aluminum heat shield isolates filters from engine heat\u003c\/li\u003e\n\u003cli\u003eSnaps onto the factory lower airbox using factory mounting locations\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required for faster installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual wrinkle-black powder-coated aluminum intake tubes with H-pipe\u003c\/li\u003e\n\u003cli\u003eTwo Pro 5R oiled performance air filters\u003c\/li\u003e\n\u003cli\u003eSealed aluminum heat shield\u003c\/li\u003e\n\u003cli\u003eMounting hardware and couplers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCARB status: not CARB exempt (no EO#) — legal for off-road\/competition use only; not legal for sale or use on pollution-controlled vehicles registered in California or other CARB-adopting states\u003c\/li\u003e\n\u003cli\u003eFilter media: Pro 5R 5-layer oiled cotton gauze\u003c\/li\u003e\n\u003cli\u003eTube design: Dual 3-1\/2 inch mandrel-bent aluminum with H-pipe\u003c\/li\u003e\n\u003cli\u003eFinish: Wrinkle-black powder coat\u003c\/li\u003e\n\u003cli\u003eAirflow: Outflows factory intake by 78%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the 2017-2020 Ford F-150 Raptor with the 3.5L EcoBoost twin-turbo V6 only. It does not fit non-Raptor F-150 models or other engine configurations.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2017-2020 Ford F-150 Raptor 3.5L EcoBoost twin-turbo V6\u003c\/li\u003e\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":53249760985385,"sku":"54-12882-B","price":808.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_475bae5b-1fcd-4db9-843a-3c0939f80ba1.jpg?v=1781229261"},{"product_id":"injen-power-flow-cold-air-intake-polished-pf9027p-ford-f150-4-6l","title":"Injen Power-Flow Cold Air Intake Polished 4.6L for 09-10 Ford F-150","description":"\u003cp\u003eThe Injen PF9027P is a Power-Flow polished cold air intake system for the 2009-2010 Ford F-150 4.6L 2-Valve V8 that adds airflow, power, and a deeper intake tone with no tune required.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eIncludes the polished intake tube, dry filter, heat shield, and installation hardware.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ford F-150 (2009-2010). Fits the 4.6L 2-Valve V8 only — not the 5.0L V8 or 3.5L EcoBoost F-150. This intake is NOT CARB-exempt and is not legal for sale or use on pollution-controlled vehicles in California; it cannot be shipped to CA, CO, CT, DE, ME, MD, MA, MN, NY, NJ, OR, PA, RI, VT, or WA.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":53249761083689,"sku":"PF9027P","price":417.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_28d80ee1-36be-44b3-bc9f-4ce6719b0164.jpg?v=1781229277"},{"product_id":"baja-designs-s8-hood-scoop-light-kit-polaris-rzr-xp-turbo-turbo-s-447072","title":"Baja Designs S8 10\" Hood Scoop Light Kit Polaris RZR Turbo \/ Turbo S","description":"\u003cp\u003eLight up the trail and add a custom look to your Polaris RZR Turbo with the Baja Designs 447072 Hood Scoop Kit. This kit integrates a powerful 10-inch S8 Driving\/Combo LED light bar into the hood scoop area for a clean, purpose-built appearance and serious forward lighting.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts a 10-inch S8 light bar cleanly in the factory hood scoop location\u003c\/li\u003e\n\u003cli\u003e6,350 lumens of forward light for confident night and dusty driving\u003c\/li\u003e\n\u003cli\u003eDriving\/Combo optics blend spot and spread for trail and high-speed use\u003c\/li\u003e\n\u003cli\u003eVehicle-specific brackets for a no-guesswork, factory-style fit\u003c\/li\u003e\n\u003cli\u003eLow 4.0 amp draw is easy on your electrical system\u003c\/li\u003e\n\u003cli\u003eBacked by the Baja Designs limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10-inch S8 Driving\/Combo LED light\u003c\/li\u003e\n\u003cli\u003eS8 On\/Off wiring harness\u003c\/li\u003e\n\u003cli\u003eHood scoop mounting brackets and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis kit is designed for the turbo-platform Polaris RZR. Confirm your model and year before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2019-2021 Polaris RZR XP Turbo and XP 4 Turbo\u003c\/li\u003e\n\u003cli\u003e2018-2021 Polaris RZR XP Turbo S and XP 4 Turbo S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":53249964605737,"sku":"447072","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_3dd3f32b-f8ac-4fa2-add5-47af42e0f450.jpg?v=1781235807"},{"product_id":"aem-induction-cold-air-intake-f-150-ecoboost-21-8128dc","title":"AEM Cold Air Intake for 15-21 F-150 2.7L \/ 15-16 3.5L EcoBoost","description":"\u003cp\u003eThe AEM 21-8128DC Brute Force cold air intake fits the 2015-2021 Ford F-150 2.7L EcoBoost and the 2015-2016 Ford F-150 3.5L EcoBoost V6, replacing the restrictive factory airbox and filter with a dyno-tuned, high-flow induction system in a gunmetal-gray finish.\u003c\/p\u003e\u003cp\u003eFitment: 2015-2021 Ford F-150 with the 2.7L EcoBoost V6 and 2015-2016 Ford F-150 with the 3.5L EcoBoost V6. Does not fit the 3.5L EcoBoost after 2016, the 5.0L V8, the 3.3L\/3.5L non-turbo V6, or the redesigned 2021+ 14th-gen engine bays beyond the listed span.\u003c\/p\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":53308554641705,"sku":"21-8128DC","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_bfa0b2be-98c8-4e56-9cfd-6671c3551f3b.jpg?v=1783376746"},{"product_id":"roush-cold-air-intake-f-150-5-0l-v8-422267","title":"Roush Cold Air Intake for 2018-2024 Ford F-150 5.0L V8","description":"\u003cp\u003eThe Roush 422267 cold air intake fits the 2018-2024 Ford F-150 5.0L V8, including trucks equipped with Ford Pro Power Onboard. It replaces the factory airbox with an oversized injection-molded tray, high-flow dry filter, and 105mm mass-airflow tube for improved airflow and a more aggressive induction note - with no PCM recalibration required.\u003c\/p\u003e\u003cp\u003eWhat's included: the high-flow washable dry air filter with clamp, oversized injection-molded air box tray, clean air tube, 105mm mass-airflow tube, and all mounting hardware. Fitment: 2018-2024 Ford F-150 5.0L V8 only. Does not fit the 2.7L or 3.5L EcoBoost V6, the 3.3L V6, or the diesel.\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":53308554674473,"sku":"422267","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_3e4fb284-e1be-44bf-9f47-4a86686fee06.jpg?v=1783377444"},{"product_id":"kn-engineering-nextgen-cold-air-intake-f-150-raptor-50-2617","title":"K\u0026N NextGen Cold Air Intake 21-23 F-150 \u0026 Raptor 2.7L\/3.5L","description":"\u003cp\u003eThe K\u0026amp;N 50-2617 NextGen cold air intake fits the 2021-2024 Ford F-150 and F-150 Raptor with the 2.7L or 3.5L EcoBoost V6 (14th-generation trucks). It replaces the factory airbox with a molded, enclosed heat shield and a washable K\u0026amp;N high-flow oiled air filter for increased airflow and a more responsive throttle.\u003c\/p\u003e\u003cp\u003eWhat's included: the molded intake tube, enclosed heat shield, washable K\u0026amp;N high-flow oiled air filter, and mounting hardware. Fitment: 2021-2024 Ford F-150 and Raptor 2.7L\/3.5L EcoBoost. Does not fit the 5.0L V8, the 3.3L V6, or 2015-2020 F-150s.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53308554707241,"sku":"50-2617","price":425.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_0071a1d6-cae4-4ef8-9512-ffed6381bd40.jpg?v=1783377636"},{"product_id":"kn-77-series-metal-intake-77-9043kp-2024-toyota-tacoma","title":"K\u0026N 77 Series Aluminum Intake 77-9043KP for 2024-2026 Toyota Tacoma","description":"\u003cp\u003eK\u0026amp;N's 77 Series high-flow performance cold air intake, part number 77-9043KP, is the metal-tube kit for the 2024-2026 Toyota Tacoma with the L4-2.4L turbo engine; the K\u0026amp;N listing on Amazon also covers the 2024-2026 Toyota Land Cruiser on the same engine.\u003c\/p\u003e\u003cp\u003eWhere K\u0026amp;N's polyethylene kits mold the inlet path in plastic, the 77 Series is built around a mandrel-bent aluminum intake tube. Mandrel bending holds the tube's cross-section constant through each curve rather than crimping it, which is why the 77 line is what owners pick when they want a visible metal engine-bay piece instead of a hidden black box. The tube feeds a washable, reusable High-Flow Lifetime air filter on oiled cotton media, with a heat shield between filter and engine bay.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent aluminum intake tube holds a constant bore through every bend for uninterrupted flow\u003c\/li\u003e\n\u003cli\u003eK\u0026amp;N states a guaranteed increase in horsepower and torque with no tune required\u003c\/li\u003e\n\u003cli\u003eOiled cotton High-Flow Lifetime filter is washable and reusable, so no disposable elements\u003c\/li\u003e\n\u003cli\u003eUp to 100,000 miles between filter services under normal highway driving conditions\u003c\/li\u003e\n\u003cli\u003eHeat shield keeps the filter separated from surrounding engine-bay heat\u003c\/li\u003e\n\u003cli\u003ePainless, mod-free and drill-less installation using the existing mounting points\u003c\/li\u003e\n\u003cli\u003eTypical install runs about an hour with basic hand tools\u003c\/li\u003e\n\u003cli\u003eDealer fitment tables list it across every 2024 Tacoma trim from SR to Trailhunter and TRD Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent aluminum intake tube\u003c\/li\u003e\n\u003cli\u003eHigh-flow oiled cotton air filter\u003c\/li\u003e\n\u003cli\u003eHeat shield\u003c\/li\u003e\n\u003cli\u003eHoses, adapter, clamps and fastening hardware (14 components total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe 77-9043KP fits the 2024-2026 Toyota Tacoma with the L4-2.4L turbo engine across the SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited and Trailhunter trims. Does not fit the 2024-2026 Tacoma TRD Pro: K\u0026amp;N's installation sheet for 77-9043KP states the kit will not fit the Tacoma TRD Pro or the 2025-2026 4Runner TRD Pro.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N's installation sheet lists the same part number for the 2024-2026 Toyota Land Cruiser and the 2025-2026 Toyota 4Runner (all trims except TRD Pro), both of which use the 2.4L turbo engine; the K\u0026amp;N Amazon listing repeats the Land Cruiser application.\u003c\/p\u003e\u003cp\u003eDoes not interchange with the 63-9043. That part number is K\u0026amp;N's 63 Series AirCharger for the same trucks, a polyethylene tube sealed inside an enclosed air box, and the two kits share no housing hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2024-2026 Toyota Tacoma L4-2.4L turbo, all trims except TRD Pro\u003c\/li\u003e\n\u003cli\u003e2024-2026 Toyota Land Cruiser L4-2.4L turbo\u003c\/li\u003e\n\u003cli\u003e2025-2026 Toyota 4Runner L4-2.4L turbo, all trims except TRD Pro\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53461163999529,"sku":"77-9043KP","price":498.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_4406a83c-b7c4-4694-abec-b61ec4ea6184.jpg?v=1788105400"},{"product_id":"injen-evolution-elite-evo2201g-2024-toyota-tacoma-gray","title":"Injen Evolution Elite Intake EVO2201G 2024-2026 Toyota Tacoma Gray","description":"\u003cp\u003eInjen EVO2201G is the Cement Gray Evolution Elite cold air intake system for the 2024-2026 Toyota Tacoma with the L4-2.4L turbo engine; Injen states it does not fit i-FORCE MAX hybrid models.\u003c\/p\u003e\u003cp\u003eWhat separates Evolution Elite from a conventional sealed box is that it does not commit you to one configuration. The single-piece roto-molded XLPE air box carries a magnetic removable lid, so the same kit runs sealed for daily driving or converts to an open element when you want the induction noise. A second magnetic panel is a see-through window, so a filter check takes seconds. An integrated velocity stack smooths the transition into the turbo inlet and a functional ram air scoop feeds the box. Injen's dyno testing puts the result at up to 15 wheel horsepower and 19 lb-ft on the factory calibration.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven up to 15 wheel horsepower and 19 lb-ft on the stock calibration\u003c\/li\u003e\n\u003cli\u003eMagnetic removable lid converts the system between sealed and open-element\u003c\/li\u003e\n\u003cli\u003eSee-through magnetic window turns a filter inspection into a glance\u003c\/li\u003e\n\u003cli\u003eSuperNano-Web dry filter traps particles as small as one micron and is fully serviceable\u003c\/li\u003e\n\u003cli\u003eIntegrated velocity stack smooths airflow into the turbo inlet\u003c\/li\u003e\n\u003cli\u003eFunctional ram air scoop feeds the box from outside the engine bay\u003c\/li\u003e\n\u003cli\u003eRoto-molded XLPE construction resists heat soak and impact\u003c\/li\u003e\n\u003cli\u003eRuns correct air-fuel ratios with no additional tuning, and adds an aggressive tone at full throttle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-piece roto-molded XLPE air box with removable magnetic lid\u003c\/li\u003e\n\u003cli\u003eRoto-molded XLPE intake tube\u003c\/li\u003e\n\u003cli\u003eInjen SuperNano-Web dry air filter\u003c\/li\u003e\n\u003cli\u003eStainless steel band clamps\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade silicone couplers and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eInjen lists EVO2201G as a direct fit for the 2024-2026 Toyota Tacoma with the L4-2.4L turbo engine.\u003c\/p\u003e\u003cp\u003eDoes not fit i-FORCE MAX hybrid models. Injen states this on its own product page for EVO2201G, and the same exclusion appears on the STILLEN listing for this part number.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma L4-2.4L turbo, non-hybrid\u003c\/li\u003e\u003c\/ul\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":53461164196137,"sku":"EVO2201G","price":423.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_e704d2e6-a5b1-4f98-b50c-d44098347042.jpg?v=1788105419"},{"product_id":"mishimoto-performance-air-intake-mmai-tac-24-2024-toyota-tacoma","title":"Mishimoto Oiled Air Intake MMAI-TAC-24 2024-2026 Toyota Tacoma","description":"\u003cp\u003eMishimoto MMAI-TAC-24 is the oiled-filter version of Mishimoto's performance air intake for the 2024-2026 Toyota Tacoma running the T24A-FTS 2.4L turbo engine on the TNGA-F chassis, in non-Trailhunter form.\u003c\/p\u003e\u003cp\u003eThe problem Mishimoto set out to solve here was restriction ahead of the turbo, and the answer was measured rather than asserted: on the flow bench the system is up to 27.7 percent less restrictive than stock with the secondary inlet plug removed, and on the dyno it returns up to 11.6 horsepower and 10.6 lb-ft, concentrated in the midrange where turbo response is most sensitive to airflow. Two details do the work. The factory's corrugated inlet hose gives way to a four-layer smooth silicone coupler, removing the turbulence those ribs create. And the MAF housing is injection-moulded from glass-filled nylon to OEM geometry, so the sensor reads what it expects and the truck stays on its stock tune.\u003c\/p\u003e\u003cp\u003eThe secondary air inlet is the part that matters off pavement. It draws from the passenger-side fender for extra volume and ships with a removable plug, so you can seal it before a water crossing or a dusty run and open it afterwards. A flexible grommet holds the seal while the chassis flexes on the trail.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDyno-proven up to 11.6 hp and 10.6 lb-ft, strongest through the midrange\u003c\/li\u003e\n\u003cli\u003eUp to 27.7 percent less restriction than stock, secondary plug removed\u003c\/li\u003e\n\u003cli\u003eSealable secondary fender inlet for water fording and dusty conditions\u003c\/li\u003e\n\u003cli\u003eOEM-style glass-filled nylon MAF housing avoids check-engine lights\u003c\/li\u003e\n\u003cli\u003eFour-layer silicone coupler replaces the turbulent factory corrugated hose\u003c\/li\u003e\n\u003cli\u003eFlexible grommet holds the seal while the chassis flexes off-road\u003c\/li\u003e\n\u003cli\u003eRotomolded polyethylene airbox with UV inhibitors\u003c\/li\u003e\n\u003cli\u003eSafe on the stock tune - no custom calibration needed\u003c\/li\u003e\n\u003cli\u003eBolt-on to factory mounting points in roughly 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRotomolded airbox\u003c\/li\u003e\n\u003cli\u003eConical oiled performance air filter\u003c\/li\u003e\n\u003cli\u003eOEM-style MAF housing\u003c\/li\u003e\n\u003cli\u003eFour-layer silicone coupler\u003c\/li\u003e\n\u003cli\u003eFlexible mounting grommet\u003c\/li\u003e\n\u003cli\u003eSecondary inlet plug\u003c\/li\u003e\n\u003cli\u003eWritten and video install instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eMishimoto lists this intake for the 2024-2026 Toyota Tacoma with the T24A-FTS 2.4L turbo engine.\u003c\/p\u003e\u003cp\u003eDoes not fit Trailhunter applications - Mishimoto publishes the part as the non-Trailhunter intake, so a Trailhunter owner needs a different system.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma 2.4L turbo (T24A-FTS), non-Trailhunter\u003c\/li\u003e\u003c\/ul\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53461164294441,"sku":"MMAI-TAC-24","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_d66778f0-7703-479f-8e54-e6f339a6d213.jpg?v=1788105432"},{"product_id":"kn-63-series-aircharger-63-9043-2024-toyota-tacoma","title":"K\u0026N 63 Series AirCharger Intake 63-9043 for 2024-2026 Toyota Tacoma","description":"\u003cp\u003eThe K\u0026amp;N 63 Series AirCharger, part number 63-9043, is a sealed-airbox cold air intake system for the 2024-2026 Toyota Tacoma with the L4-2.4L turbocharged engine. K\u0026amp;N lists the same part number for the 2025-2026 Toyota 4Runner and the 2024-2026 Toyota Land Cruiser, which share the 2.4L turbo powerplant.\u003c\/p\u003e\u003cp\u003eThe fourth-generation Tacoma breathes through a molded factory duct and a disposable paper element. The 63-9043 swaps that assembly for a rotationally molded high-density polyethylene tube and a conical oiled-cotton filter carried inside a custom enclosed air box. Because the box is closed rather than open, the turbo pulls cooler air instead of radiant heat off the exhaust manifold. K\u0026amp;N publishes a guaranteed 15.6 horsepower and 20.7 lb-ft gain, on the stock calibration, no tune required.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGuaranteed 15.6 hp and 20.7 lb-ft increase with no ECU tuning\u003c\/li\u003e\n\u003cli\u003eFully enclosed air box isolates the filter from engine-bay heat\u003c\/li\u003e\n\u003cli\u003eRoto-molded HDPE tube resists heat soak and smooths the path to the turbo\u003c\/li\u003e\n\u003cli\u003eWashable, reusable High-Flow Lifetime filter replaces the throwaway element\u003c\/li\u003e\n\u003cli\u003eUp to 100,000 miles between filter services in normal highway driving\u003c\/li\u003e\n\u003cli\u003eBolt-in install most owners finish in under 60 minutes with hand tools\u003c\/li\u003e\n\u003cli\u003eBacked by the K\u0026amp;N no-hassle lifetime limited warranty\u003c\/li\u003e\n\u003cli\u003eListed for every 2024-2026 Tacoma trim except the TRD Pro, per K\u0026amp;N's own fitment note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRotationally molded high-density polyethylene intake tube\u003c\/li\u003e\n\u003cli\u003eHigh-flow oiled cotton conical air filter\u003c\/li\u003e\n\u003cli\u003eCustom enclosed air box\u003c\/li\u003e\n\u003cli\u003eSix stainless steel clamps\u003c\/li\u003e\n\u003cli\u003eTwo couplers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe K\u0026amp;N 63-9043 fits the 2024-2026 Toyota Tacoma with the L4-2.4L turbo engine across the SR, SR5, TRD PreRunner, TRD Sport, TRD Sport Premium, TRD Off-Road, Limited and Trailhunter trims. Does not fit the 2024-2026 Tacoma TRD Pro: K\u0026amp;N's installation sheet for 63-9043 states the kit will not fit the Tacoma TRD Pro or the 2025-2026 4Runner TRD Pro.\u003c\/p\u003e\u003cp\u003eThe same part number is listed by K\u0026amp;N for the 2025-2026 Toyota 4Runner (all trims except TRD Pro) and for the 2024-2026 Toyota Land Cruiser, both of which use the 2.4L turbo engine.\u003c\/p\u003e\u003cp\u003eDoes not interchange with the 77-9043KP, K\u0026amp;N's separate 77 Series kit for the same trucks, which uses an aluminum tube and a heat shield instead of this enclosed airbox.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2024-2026 Toyota Tacoma L4-2.4L turbo, all trims except TRD Pro\u003c\/li\u003e\n\u003cli\u003e2025-2026 Toyota 4Runner L4-2.4L turbo, all trims except TRD Pro\u003c\/li\u003e\n\u003cli\u003e2024-2026 Toyota Land Cruiser L4-2.4L turbo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53461164654889,"sku":"63-9043","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1584\/9683\/files\/00_dc6ae44d-d29d-4950-8d87-2d39d14c297d.jpg?v=1788105442"}],"url":"https:\/\/www.dirtmasters.com\/collections\/air-intake.oembed?page=3","provider":"Dirt Masters","version":"1.0","type":"link"}